GA 64-66 Cab Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**uncle** · 10-29-2016, 04:24 PM

Anybody see anything you need or want. Not sure how to price anything so just ask. I will price the vents at 25+ shipping. Please respond in the post.

**uncle** · 10-29-2016, 04:25 PM

2222222

**uncle** · 10-29-2016, 04:25 PM

3333333

**aotte1** · 10-29-2016, 05:47 PM

FYI, Looks like you do show the bracket and one spring that holds the jack, and possibley one cab mount cushion.

Brad54 · 10-29-2016, 06:18 PM

Interested in the jack bracket and spring. I'm in Jefferson, between Athens and Gainesville, and run the NE Georgia Swap Meet each month (next show is Saturday, November 5), so shipping shouldn't be much of an issue.

Send PM with price.

Thanks,
-Brad

**uncle** · 10-29-2016, 08:32 PM

So you have plenty of money. Let me think on it a day or 2 and I'll get you a price. This is Tim. Woody's buddy. You get $20 from me once a month.

Brad54 · 10-31-2016, 05:55 PM

Quote:

Originally Posted by uncle

So you have plenty of money. Let me think on it a day or 2 and I'll get you a price. This is Tim. Woody's buddy. You get $20 from me once a month.

HA! "plenty of money" he says!

I'm usually so broke, I have to fart just to have a (s)cent in my pocket.

Throw 'em on the truck. I found a factory jack, handle and lug wrench that I WASN'T looking for but now I have it, so now I feel obligated to put them in the Suburban when I get it back on the road... but I got rid of the factory bracket when I mounted an under-seat heater.

-Brad

**uncle** · 10-30-2016, 05:40 PM

Brad, I'll bring those to swap Saturday if you want. Hope you know I was kidding.

jdl71 · 10-30-2016, 06:58 PM

Would you be willing to cut out the area circled in white? Hopefully this makes sense: the drivers side from somewhere below the dimmer switch recess, past the bend, to somewhere forward on the firewall and a bit up the side of the foot well below the vent, to include the pinch weld on the side. The problem I'm trying to fix is the 3 way corner circled in red, some of the "wall" of the footwell has rusted and is separating from the floor. I can try to explain it better if needed. Thanks.

**uncle** · 10-31-2016, 12:26 PM

I'll check it out and let you know

**uncle** · 10-31-2016, 12:39 PM

It's not rusty but if you could give me some actual measurements that would help

jdl71 · 10-31-2016, 08:43 PM

Quote:

Originally Posted by uncle

It's not rusty but if you could give me some actual measurements that would help

I can do that, might be a day or two.

Brad54 · 10-31-2016, 05:57 PM

(and yeah man, I knew you were joking. I screw with people with people all the time--it's all good man)

jdl71 · 11-05-2016, 07:23 PM

Don't worry about that floor cut right now, I've got too many irons in the fire at present. Thanks anyway.

72freak · 11-05-2016, 09:08 PM

I do love me some time wasters!

jdl71 · 11-11-2016, 07:34 PM

Quote:

Originally Posted by 72freak

I do love me some time wasters!

Who exactly is wasting your time?

2manyprojects · 11-12-2016, 07:05 PM

Im interested in the harness if its for gauges and not completely trashed. I'm trying to fix one that has been butchered.

Pm a price shipped to 23228

**uncle** · 11-13-2016, 03:35 PM

Harness is shot. Sorry.

urmyboyblue · 11-16-2016, 09:11 AM

Interested in the rear cross member under the cab. Is it in good shape? How about the back wall of the cab down low? Mine is rotted out. If it is in good shape, how much for the crossmember and the lower 6" of the back wall? I am in Birmingham and could drive over and pick it up.

**uncle** · 11-20-2016, 02:57 PM

Sorry just saw your post urmyboyblue. Try to check out tomorrow

**uncle** · 11-21-2016, 04:56 PM

Here's pics

**uncle** · 11-21-2016, 04:57 PM

222222

**uncle** · 11-21-2016, 04:57 PM

33333

**uncle** · 11-21-2016, 04:58 PM

4444

urmyboyblue · 11-22-2016, 08:53 AM

Just to be clear, I only want the back 12" of the floor and back of cab. Cut from door frame to door frame. I can come pick it up this weekend if we can make a deal. PM me.

10-29-2016, 04:24 PM	#1
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	64-66 Cab Parts Anybody see anything you need or want. Not sure how to price anything so just ask. I will price the vents at 25+ shipping. Please respond in the post. Attached Images

10-29-2016, 04:25 PM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts 2222222 Attached Images

10-29-2016, 04:25 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts 3333333 Attached Images

10-29-2016, 05:47 PM	#4
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: 64-66 Cab Parts FYI, Looks like you do show the bracket and one spring that holds the jack, and possibley one cab mount cushion.

10-29-2016, 06:18 PM	#5
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,457	Re: 64-66 Cab Parts Interested in the jack bracket and spring. I'm in Jefferson, between Athens and Gainesville, and run the NE Georgia Swap Meet each month (next show is Saturday, November 5), so shipping shouldn't be much of an issue. Send PM with price. Thanks, -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

10-29-2016, 08:32 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts So you have plenty of money. Let me think on it a day or 2 and I'll get you a price. This is Tim. Woody's buddy. You get $20 from me once a month.

10-30-2016, 05:40 PM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts Brad, I'll bring those to swap Saturday if you want. Hope you know I was kidding.

10-30-2016, 06:58 PM	#9
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 64-66 Cab Parts Would you be willing to cut out the area circled in white? Hopefully this makes sense: the drivers side from somewhere below the dimmer switch recess, past the bend, to somewhere forward on the firewall and a bit up the side of the foot well below the vent, to include the pinch weld on the side. The problem I'm trying to fix is the 3 way corner circled in red, some of the "wall" of the footwell has rusted and is separating from the floor. I can try to explain it better if needed. Thanks. Attached Images __________________ Psalm 23 64 C10 66 K20

10-31-2016, 12:26 PM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts I'll check it out and let you know

10-31-2016, 12:39 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts It's not rusty but if you could give me some actual measurements that would help

10-31-2016, 05:57 PM	#13
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,457	Re: 64-66 Cab Parts (and yeah man, I knew you were joking. I screw with people with people all the time--it's all good man) __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

11-05-2016, 07:23 PM	#14
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 64-66 Cab Parts Don't worry about that floor cut right now, I've got too many irons in the fire at present. Thanks anyway. __________________ Psalm 23 64 C10 66 K20

11-05-2016, 09:08 PM	#15
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 64-66 Cab Parts I do love me some time wasters! __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

11-12-2016, 07:05 PM	#17
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: 64-66 Cab Parts Im interested in the harness if its for gauges and not completely trashed. I'm trying to fix one that has been butchered. Pm a price shipped to 23228 __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

11-13-2016, 03:35 PM	#18
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts Harness is shot. Sorry.



Register or Log In To remove these advertisements.

11-16-2016, 09:11 AM	#19
urmyboyblue Registered User Join Date: Feb 2015 Location: Montevallo, AL Posts: 272	Re: 64-66 Cab Parts Interested in the rear cross member under the cab. Is it in good shape? How about the back wall of the cab down low? Mine is rotted out. If it is in good shape, how much for the crossmember and the lower 6" of the back wall? I am in Birmingham and could drive over and pick it up.

11-20-2016, 02:57 PM	#20
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts Sorry just saw your post urmyboyblue. Try to check out tomorrow

11-21-2016, 04:56 PM	#21
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts Here's pics Attached Images

11-21-2016, 04:57 PM	#22
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts 222222 Attached Images

11-21-2016, 04:57 PM	#23
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts 33333 Attached Images

11-21-2016, 04:58 PM	#24
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 64-66 Cab Parts 4444 Attached Images

11-22-2016, 08:53 AM	#25
urmyboyblue Registered User Join Date: Feb 2015 Location: Montevallo, AL Posts: 272	Re: 64-66 Cab Parts Just to be clear, I only want the back 12" of the floor and back of cab. Cut from door frame to door frame. I can come pick it up this weekend if we can make a deal. PM me.

Register or Log In To remove these advertisements.