My first video!! Crappy one at that. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b454rat · 12-20-2009, 10:50 AM

Needed to get some pics of my shortbox, might be sold, thought I'd try to take a video of the truck so he can hear it run. Video itself turned out OK, but the sound SUCKS. Truck has headers, 3" flexpipe and 2 1/2" fake flomasters with no pipes. Think there is too much reverberation and the camera can't get it. Here is a link to youtube.

YouTube- 84 Chevy 454

Matt Man · 12-20-2009, 07:58 PM

sounds pretty good but not fan shroud? yikes how big is the lift?

b454rat · 12-20-2009, 08:09 PM

The small block one would hit the fan, was beat to crap too, cracked, and pieces missing. Doesn't get hot tho. It's 6" lift with 315/75s. And rubs with those tires.

joe231 · 12-21-2009, 12:13 AM

sweet, she runs nice and smooth.
how much were you asking for it?

MylilBowTie · 12-21-2009, 01:43 AM

What headers are you running?

b454rat · 12-21-2009, 09:19 AM

I'm asking $4000 with the new 35" boggers, $3500 with the tires in the vid. Both are new with less than 500 miles.

Headers are off a Chevelle, 1 7/8" 3" collector. I like these headers cause they don't hang down below the frame. I had to notch the driver side clamshell to clear #2 primary, and lift the motor bout a 1/4" to keep from hitting the frame. It's close in some spots, but what headers aren't?

12-20-2009, 08:09 PM	#3
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: My first video!! Crappy one at that. The small block one would hit the fan, was beat to crap too, cracked, and pieces missing. Doesn't get hot tho. It's 6" lift with 315/75s. And rubs with those tires. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

12-21-2009, 12:13 AM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My first video!! Crappy one at that. sweet, she runs nice and smooth. how much were you asking for it? __________________ *CHEVY ONLY*

12-21-2009, 01:43 AM	#5
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: My first video!! Crappy one at that. What headers are you running? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

12-21-2009, 09:19 AM	#6
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: My first video!! Crappy one at that. I'm asking $4000 with the new 35" boggers, $3500 with the tires in the vid. Both are new with less than 500 miles. Headers are off a Chevelle, 1 7/8" 3" collector. I like these headers cause they don't hang down below the frame. I had to notch the driver side clamshell to clear #2 primary, and lift the motor bout a 1/4" to keep from hitting the frame. It's close in some spots, but what headers aren't? __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS Last edited by b454rat; 12-21-2009 at 09:19 AM.

12-20-2009, 07:58 PM	#2
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: My first video!! Crappy one at that. sounds pretty good but not fan shroud? yikes how big is the lift? __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.