LT Gen V headers (L83) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PowerdbyChevy79 · 11-06-2017, 06:04 PM

whats up guys..what are yall using for headers on your L83 swaps..we have a 72 blazer currently in the works..

Trackman101 · 11-09-2017, 04:23 AM

I am going to try some from Ultimate headers

PowerdbyChevy79 · 11-09-2017, 10:47 AM

Quote:

Originally Posted by Trackman101

I am going to try some from Ultimate headers

i was looking at them last nite.. thinking of the G-body headers..

chris1htx · 03-22-2018, 02:37 PM

What headers did you end up going with?

Trackman101 · 03-22-2018, 03:40 PM

I went with headers designed for a first gen Camaro LT swap from Ultimate Headers. They fit great. Muscle Rods also make some specific for 67-72
I am convinced headers for a sixth gen Camaro will fit also.Texas Speed offers them for 600 bucks.

**Clyde65** · 03-22-2018, 07:34 PM

I used BRP hot rods long tube.

cornerstone · 03-23-2018, 12:30 AM

Quote:

Originally Posted by Trackman101

I went with headers designed for a first gen Camaro LT swap from Ultimate Headers. They fit great. Muscle Rods also make some specific for 67-72
I am convinced headers for a sixth gen Camaro will fit also.Texas Speed offers them for 600 bucks.

Hey man, Ive been watching your build... its amazing and I'm jealous. Thanks for the tip on the 2017 camaro headers, may I ask why you are convinced they will fit our truck? Im very interested because they are half the price as BRP.

Also they show a 1 7/8" and a 2.0" set. What do you suggest for a stock L83 and why?

Trackman101 · 03-23-2018, 12:32 PM

Either will work fine. 1 7/8 can easily handle 7-800hp.
The new Camaro is a little smaller now so the headers have to fit in a tight space.I think they will easily tuck up nicely between the frame rails of our trucks
I would have tried them if I had found them sooner. Your in prime spot to try them as it likely wouldn't cost very much to return.

cornerstone · 03-23-2018, 11:04 PM

Quote:

Originally Posted by Trackman101

Either will work fine. 1 7/8 can easily handle 7-800hp.
The new Camaro is a little smaller now so the headers have to fit in a tight space.I think they will easily tuck up nicely between the frame rails of our trucks
I would have tried them if I had found them sooner. Your in prime spot to try them as it likely wouldn't cost very much to return.

Thanks for the feedback man.👍🏼 Part of me says bigger is better but I like the idea of having a bit of extra space. I highly doubt I would modify it near toward 700hp.

11-06-2017, 06:04 PM	#1
PowerdbyChevy79 Registered User Join Date: Apr 2013 Location: Houston,Tx Posts: 790	LT Gen V headers (L83) whats up guys..what are yall using for headers on your L83 swaps..we have a 72 blazer currently in the works.. __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 C10 Club Texas -HMIC

11-09-2017, 04:23 AM	#2
Trackman101 Registered User Join Date: Jul 2015 Location: Alberta Posts: 161	Re: LT Gen V headers (L83) I am going to try some from Ultimate headers

03-22-2018, 02:37 PM	#4
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Re: LT Gen V headers (L83) What headers did you end up going with?

03-22-2018, 03:40 PM	#5
Trackman101 Registered User Join Date: Jul 2015 Location: Alberta Posts: 161	Re: LT Gen V headers (L83) I went with headers designed for a first gen Camaro LT swap from Ultimate Headers. They fit great. Muscle Rods also make some specific for 67-72 I am convinced headers for a sixth gen Camaro will fit also.Texas Speed offers them for 600 bucks. Last edited by Trackman101; 03-22-2018 at 03:46 PM.

03-22-2018, 07:34 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: LT Gen V headers (L83) I used BRP hot rods long tube. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-23-2018, 12:32 PM	#8
Trackman101 Registered User Join Date: Jul 2015 Location: Alberta Posts: 161	Re: LT Gen V headers (L83) Either will work fine. 1 7/8 can easily handle 7-800hp. The new Camaro is a little smaller now so the headers have to fit in a tight space.I think they will easily tuck up nicely between the frame rails of our trucks I would have tried them if I had found them sooner. Your in prime spot to try them as it likely wouldn't cost very much to return.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.