Lets see your gauge panel! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jess66chevy · 11-13-2009, 12:02 AM

Here is my gauge panel that I made. I kept the original speedometer and used a piece of sheet metal to cover what I didnt want. Then I went had a sticker made for the speedo numbers. I also use arcrylic for the lens that I bought at home depot.

WILDSTANGRACING · 11-13-2009, 08:19 PM

heres a couple

tomlamb · 11-14-2009, 09:57 AM

Name: IMG_0728.jpg
Views: 4086
Size: 104.5 KB

Bazooka · 11-14-2009, 02:16 PM

ruffrida2005 · 11-14-2009, 04:21 PM

I dont have pics of mine, but it will be made just like Bazookas

dlisabeth · 11-14-2009, 04:37 PM

Has anyone come up with a good way to fill or hide the holes in the frame for the switches and ignition, etc... that aren't being used any more? I would like to do this and maintain the horizontal line detail if possible. I am going to set mine up like wildstangracing's dash

ruffrida2005 · 11-14-2009, 06:20 PM

I need to know the same thing dlisabeth. I thought about filling it with kittyhair.

protrash64 · 11-14-2009, 06:30 PM

Quote:

Originally Posted by dlisabeth

Has anyone come up with a good way to fill or hide the holes in the frame for the switches and ignition, etc... that aren't being used any more? I would like to do this and maintain the horizontal line detail if possible. I am going to set mine up like wildstangracing's dash

Quote:

Originally Posted by ruffrida2005

I need to know the same thing dlisabeth. I thought about filling it with kittyhair.

Use a glove box door.

Vernski · 11-14-2009, 07:22 PM

Here's one for a GMC I painted the back ground satin black and it looks a little better but I'm still not satisfied, I found some engine turned alunimun sheet stock at www.speedwaymotors.com Part # 911-39520-24 6x24" .063 thick so it shouldn't be to hard ti cut out in the stock configuration as back ground. The stock bezel on these are plastic, does any one know of any where that you could get the plastic chrome plated again there must be somebody doing this somewhere don't you think? I do like the stock configuration with the exception of the idiot lights I may get some smaller jewel faceted lights instead and put in there place. Anybody have anymore ideas for

?---Vernski

Hilandr451 · 11-14-2009, 07:36 PM

before

after

198plus · 11-14-2009, 09:24 PM

Nice job......Did you do it yourself.

Quote:

Originally Posted by Hilandr451

before

after

ruffrida2005 · 11-14-2009, 09:47 PM

That looks good.

Thanks for the Idea Protrash

jbgroby · 11-14-2009, 10:02 PM

Here be mine, the stock look before and the custom made insert with analog dial after (I do not like idiot lights) I simply took the natural layout and replace the lights with gauges. The tach and Clock are GMC OEM pieces and work great.

jess66chevy · 11-15-2009, 01:05 AM

QUESTION:
Does the GMC gauge cluster fit into a chevy? I like how the GMC has the round individual gauges.

**Captainfab** · 11-15-2009, 01:25 AM

No they are specific to the GMC's

You could have the same look with aftermarket gauges......

Quote:

Originally Posted by jess66chevy

QUESTION:
Does the GMC gauge cluster fit into a chevy? I like how the GMC has the round individual gauges.

SCOTI · 11-15-2009, 01:44 AM

Quote:

Originally Posted by Captainfab

No they are specific to the GMC's

You could have the same look with aftermarket gauges......

Dash shaped different or????

*LILRED66* · 11-15-2009, 01:54 AM

Here are a few of a cluster I have in my '66 Chevy C20 Custom Camper. It is heading to a fellow member this week.

SCOTI · 11-15-2009, 01:57 AM

Quote:

Originally Posted by LILRED66

Here are a few of a cluster I have in my '66 Chevy C20 Custom Camper. It is heading to a fellow member this week.

What does it take to swap that cluster in where idiot lights were?

*LILRED66* · 11-15-2009, 02:03 AM

Quote:

Originally Posted by SCOTI

What does it take to swap that cluster in where idiot lights were?

In the 4-5-6 Chevy trucks, the only part that is the same on the gauge cluster and warner light cluster, is the bezel, so it is better to find a gauge cluster, instead of trying to modify a warning light cluster.

SCOTI · 11-15-2009, 02:06 AM

Quote:

Originally Posted by LILRED66

In the 4-5-6 Chevy trucks, the only part that is the same on the gauge cluster and warner light cluster, is the bezel, so it is better to find a gauge cluster, instead of trying to modify a warning light cluster.

I guess I should re-phrase the question . . .... If I have a 'warning-light cluster' & wish to upgrade to a factory style 'gauge cluster', what do I need to do?

**Captainfab** · 11-16-2009, 01:18 AM

Basically yes. The GMC gauge panel is longer and I believe narrower that a 64-5-6 Chevy gauge panel. Plus the GMC's still had the switches in the dash below the gauge panel, similar to the '60-'63 Chevy's

Quote:

Originally Posted by SCOTI

Dash shaped different or????

In addition to the gauge panel, you will need the wire harness that connects the panel to the connector that is attached to the pedal bracket under the dash. The oil pressure is a mechanical gauge, so you will need to run a line for that. And of course you will need the correct sending unit for the H2O temp. I believe that is all that is needed.

Quote:

Originally Posted by SCOTI

I guess I should re-phrase the question . . .... If I have a 'warning-light cluster' & wish to upgrade to a factory style 'gauge cluster', what do I need to do?

DaddyMack · 11-16-2009, 02:18 AM

does this count ? lol

more current... like last friday..lol

98L150 · 11-16-2009, 10:37 AM

here are my mooneye gauges im putting in my 64

ol Curt · 11-16-2009, 05:50 PM

Quote:

Originally Posted by SCOTI

I guess I should re-phrase the question . . .... If I have a 'warning-light cluster' & wish to upgrade to a factory style 'gauge cluster', what do I need to do?

This is fairly accurate... http://rmcavoy.freeshell.org/Truck_gauges.html

harrison56 · 02-15-2016, 02:23 PM

here b my gauges

11-13-2009, 12:02 AM	#1
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Lets see your gauge panel! Here is my gauge panel that I made. I kept the original speedometer and used a piece of sheet metal to cover what I didnt want. Then I went had a sticker made for the speedo numbers. I also use arcrylic for the lens that I bought at home depot. Attached Images

11-13-2009, 08:19 PM	#2
WILDSTANGRACING Registered User Join Date: Nov 2009 Location: charlotte nc Posts: 14	Re: Lets see your gauge panel! heres a couple Attached Images __________________ JUST ASK

11-14-2009, 09:57 AM	#3
tomlamb Registered User Join Date: May 2008 Location: So Cal, CA Posts: 185	Re: Lets see your gauge panel!

11-14-2009, 02:16 PM	#4
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Lets see your gauge panel!

11-14-2009, 04:21 PM	#5
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Lets see your gauge panel! I dont have pics of mine, but it will be made just like Bazookas __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-14-2009, 04:37 PM	#6
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: Lets see your gauge panel! Has anyone come up with a good way to fill or hide the holes in the frame for the switches and ignition, etc... that aren't being used any more? I would like to do this and maintain the horizontal line detail if possible. I am going to set mine up like wildstangracing's dash

11-14-2009, 06:20 PM	#7
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Lets see your gauge panel! I need to know the same thing dlisabeth. I thought about filling it with kittyhair. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-14-2009, 07:22 PM	#9
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: Lets see your gauge panel! Here's one for a GMC I painted the back ground satin black and it looks a little better but I'm still not satisfied, I found some engine turned alunimun sheet stock at www.speedwaymotors.com Part # 911-39520-24 6x24" .063 thick so it shouldn't be to hard ti cut out in the stock configuration as back ground. The stock bezel on these are plastic, does any one know of any where that you could get the plastic chrome plated again there must be somebody doing this somewhere don't you think? I do like the stock configuration with the exception of the idiot lights I may get some smaller jewel faceted lights instead and put in there place. Anybody have anymore ideas for ?---Vernski Attached Images

11-14-2009, 07:36 PM	#10
Hilandr451 Registered User Join Date: Oct 2005 Location: Houston Texas Posts: 316	Re: Lets see your gauge panel! before after __________________ Greg Smith a.k.a. "The Highlander" 1966 C20 Custom Camper, 2017 Chevy Silverado 1500 Highlander's Project Pics Highlander's web site: www.6066ChevyTrucks.com

11-14-2009, 09:47 PM	#12
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Lets see your gauge panel! That looks good. Thanks for the Idea Protrash __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-14-2009, 10:02 PM	#13
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Lets see your gauge panel! Here be mine, the stock look before and the custom made insert with analog dial after (I do not like idiot lights) I simply took the natural layout and replace the lights with gauges. The tach and Clock are GMC OEM pieces and work great. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-15-2009, 01:05 AM	#14
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Re: Lets see your gauge panel! QUESTION: Does the GMC gauge cluster fit into a chevy? I like how the GMC has the round individual gauges.

11-15-2009, 01:54 AM	#17
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Lets see your gauge panel! Here are a few of a cluster I have in my '66 Chevy C20 Custom Camper. It is heading to a fellow member this week. Attached Images

11-16-2009, 02:18 AM	#22
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: Lets see your gauge panel! does this count ? lol more current... like last friday..lol __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 Last edited by DaddyMack; 11-16-2009 at 01:19 PM.

11-16-2009, 10:37 AM	#23
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Lets see your gauge panel! here are my mooneye gauges im putting in my 64 Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915



Register or Log In To remove these advertisements.

02-15-2016, 02:23 PM	#25
harrison56 Registered User Join Date: Mar 2015 Location: Boydton Va Posts: 7	Re: Lets see your gauge panel! here b my gauges Attached Images

Register or Log In To remove these advertisements.