Parting out a 79 Blazer in NJ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-28-2006, 12:12 AM

I'll be parting out a 79 Blazer I bought for the engine in the near future. The trans has no reverse and the front drive shaft is missing, otherwise all there. If interested in any parts let me know and I'll provide pics. Sorry no shipping on large parts.

Scott

**ScottH** · 11-01-2006, 10:14 PM

Hood sold to dpmalibu, thanks Damien!

Lots of goodies left, let me know what you need.

Scott

dpmalibu · 11-02-2006, 12:33 AM

No problem.Thanks for a good deal.Good guy to deal with.Definately lots of good parts left on this truck.Truck is in pretty good shape.

powder2 · 11-02-2006, 07:42 PM

rear seat belts an passanger door still plate is it power or manual windows

**ScottH** · 11-03-2006, 10:22 AM

I'll check on those parts and let you know over the weekend.
Manual windows.

Scott

BackWoodsRanch · 11-13-2006, 11:17 AM

Quote:

Originally Posted by ScottH

I'll be parting out a 79 Blazer I bought for the engine in the near future. The trans has no reverse and the front drive shaft is missing, otherwise all there. If interested in any parts let me know and I'll provide pics. Sorry no shipping on large parts.

Scott

Wondering what rears and ratio it has?
How much for both?

Thanks,
Steve

**ScottH** · 11-13-2006, 03:54 PM

Steve, I believe the Blazer is sold pending pickup in about two weeks.

I'll let you know if it is still available.

msgross · 11-13-2006, 05:37 PM

hey there, did the tires I gave you work out?

Do you have a center console in that Blazer that you want to get rid of? Let me know by a PM if so...I would also be interested in the fuel filler neck and door parts.

Mike

BackWoodsRanch · 11-13-2006, 08:40 PM

Quote:

Originally Posted by ScottH

Steve, I believe the Blazer is sold pending pickup in about two weeks.

I'll let you know if it is still available.

No problem.

Thanks,
Steve

**crossy** · 11-22-2006, 09:14 AM

scott, still looking for a good mid 70's , V-8 engine wiring harness, thanx , crossy

**ScottH** · 11-22-2006, 10:22 AM

Crossy, still unknown if it is sold as a whole truck. It will probably be another couple of weeks before I know for sure. I'll let you know what's happening with it as soon as I can.

Scott

mntoy · 11-22-2006, 01:01 PM

I am looking for the 2 front stabalizer (sway bar) mounting towers that are riveted to the frame. I only need the towers but will take the entire tower, rubbers and rubber brackets if you have them. Please let me know?

mntoy · 11-25-2006, 03:01 PM

Thanks for the reply but I found these parts locally.

*culookn* · 11-25-2006, 09:31 PM

i need a pass side door. can you post pics.

cliffsta · 11-25-2006, 10:43 PM

What trim level is it? I'm lookin for a Custom Deluxe dash emblem.

**ScottH** · 11-26-2006, 10:36 AM

Guys, everything is pending until I know if the truck is sold or not.
May be another couple of weeks till I know.
I'll update this thread once I know for sure.

Thanks

Scott

Kurt L · 12-17-2006, 09:03 PM

blue dash pad please.

**ScottH** · 12-18-2006, 11:46 AM

Kurt, sorry dash pad is shot. But take at look at this thread -
http://www.67-72chevytrucks.com/vboa...d.php?t=219204

should know if the truck is going whole or getting parted this week......I know, long wait.

10-28-2006, 12:12 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Parting out a 79 Blazer in NJ I'll be parting out a 79 Blazer I bought for the engine in the near future. The trans has no reverse and the front drive shaft is missing, otherwise all there. If interested in any parts let me know and I'll provide pics. Sorry no shipping on large parts. Scott

11-01-2006, 10:14 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ Hood sold to dpmalibu, thanks Damien! Lots of goodies left, let me know what you need. Scott

11-02-2006, 12:33 AM	#3
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: Parting out a 79 Blazer in NJ No problem.Thanks for a good deal.Good guy to deal with.Definately lots of good parts left on this truck.Truck is in pretty good shape.

11-02-2006, 07:42 PM	#4
powder2 Registered User Join Date: Oct 2003 Location: Abilene Texas Posts: 287	Re: Parting out a 79 Blazer in NJ rear seat belts an passanger door still plate is it power or manual windows

11-03-2006, 10:22 AM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ I'll check on those parts and let you know over the weekend. Manual windows. Scott

11-13-2006, 03:54 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ Steve, I believe the Blazer is sold pending pickup in about two weeks. I'll let you know if it is still available.

11-13-2006, 05:37 PM	#8
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Parting out a 79 Blazer in NJ hey there, did the tires I gave you work out? Do you have a center console in that Blazer that you want to get rid of? Let me know by a PM if so...I would also be interested in the fuel filler neck and door parts. Mike

11-22-2006, 09:14 AM	#10
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: Parting out a 79 Blazer in NJ scott, still looking for a good mid 70's , V-8 engine wiring harness, thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-22-2006, 10:22 AM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ Crossy, still unknown if it is sold as a whole truck. It will probably be another couple of weeks before I know for sure. I'll let you know what's happening with it as soon as I can. Scott

11-22-2006, 01:01 PM	#12
mntoy Registered User Join Date: May 2006 Location: Calif Posts: 43	Re: Parting out a 79 Blazer in NJ I am looking for the 2 front stabalizer (sway bar) mounting towers that are riveted to the frame. I only need the towers but will take the entire tower, rubbers and rubber brackets if you have them. Please let me know?

11-25-2006, 03:01 PM	#13
mntoy Registered User Join Date: May 2006 Location: Calif Posts: 43	Re: Parting out a 79 Blazer in NJ Thanks for the reply but I found these parts locally.

11-25-2006, 09:31 PM	#14
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: Parting out a 79 Blazer in NJ i need a pass side door. can you post pics.

11-25-2006, 10:43 PM	#15
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	Re: Parting out a 79 Blazer in NJ What trim level is it? I'm lookin for a Custom Deluxe dash emblem. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

11-26-2006, 10:36 AM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ Guys, everything is pending until I know if the truck is sold or not. May be another couple of weeks till I know. I'll update this thread once I know for sure. Thanks Scott

12-17-2006, 09:03 PM	#17
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Parting out a 79 Blazer in NJ blue dash pad please.



Register or Log In To remove these advertisements.

12-18-2006, 11:46 AM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out a 79 Blazer in NJ Kurt, sorry dash pad is shot. But take at look at this thread - http://www.67-72chevytrucks.com/vboa...d.php?t=219204 should know if the truck is going whole or getting parted this week......I know, long wait.

Register or Log In To remove these advertisements.