|
Re: Midshaft bearing Problem
I do this on a weekly basis. Mark the shaft! So you can line up all of the piees of the driveshaft so it might have a chance of being ballanced. Pull ujoint, pull bolt, remove bolt on yoke remove carrier bearing. Please don't put shaft in a vice, they bend easily.
so why did the carrier bearing go bad? Age, ballance, mechanical failure?
good luck 
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck
66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate.
28, model a rpu project,
|
10-21-2010, 01:44 PM
Hybrid Mode
