Misc. parts fs: blazer top, hatch, AC duct hoses, and others - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sameyrasmea72 · 09-19-2003, 12:13 AM

The prices do not include shipping as usual. On the blazer top, I Don't even Know if it is shipable (able to be shipped), but I will help where I can. I think it is a double-wall, but not sure. I could use some help figuring that one out please. Either with a discription of the differences or I also have pics of the front, back, top, sides, just not inside pics yet.

I have more pics that i can post or email, but I will use this thread to see who has first go at some thing. Otherwise I am sure I will mess things up.

Blazer top with cracked hatch on pass. side hinge.....$250 US

Blazer hatch......175 ( I told junkyardjohn he could have the first
chance at this when I got ready to sell it, if he
is still interested, so...

69-72 drivers side inner\outer fender combo.....125 or100 & 25
very very very nice rust free

toolbox trim..... free ( already gone, I wish everything would go
that fast or at all)

69-72 console....110 restored, originally blue now black. Chevy
emb. not incuded

6 piece AC duct hoses.....38 GM stuff nos? or do they still make it?

2-72 RH armrest 1blk 1brn....8 ea

67-72 (not sure about 67,68) black visors....22

sameyrasmea72 · 09-19-2003, 12:19 AM

2

sameyrasmea72 · 09-19-2003, 12:22 AM

3

sameyrasmea72 · 09-19-2003, 12:32 AM

Last one. original paint
Hey guess what. I sold mt truck on ebay. TWICE. Looks like I may have to sell it a 3rd time (somewhere else for sure). Why does someone win an auction and never contact the seller or answer emails. go figure. keep me away from ebay Oh well I am going to feed my dogs now, what are the chances that all this will be sold when I get back. lol

2wdBlazer · 09-19-2003, 08:49 AM

Are those Blazer visors with correct mounting brackets? If so i want first dibs.

*Gee_Emm* · 09-19-2003, 09:18 AM

Rear seat hold downs?

sameyrasmea72 · 09-19-2003, 12:47 PM

2wdblazer, sorry they are just truck visors.

Gee_EMM, no hold downs, but i'll keep an eye out for them. I know you've been looking for awhile

junkyardjohn · 09-19-2003, 03:32 PM

SAMEYRASMEA72 - SORRY -- TAKE ME OFF THE LIST FOR THE BLAZER HATCH

sameyrasmea72 · 09-19-2003, 11:59 PM

hatch anybody?

sameyrasmea72 · 09-21-2003, 05:29 PM

ttt

Ring Master · 09-22-2003, 12:57 AM

any dents in the outter fender? Might take the A/C ducting and the outter fender.

sameyrasmea72 · 09-22-2003, 01:55 AM

Ring Master,
This is not a good pic, but it's the best pic of the area in question. This is lower front. In the blue where you see the line, it looks like the bumper tapped the fender at one time. This is by far the worse spot on the fender. It's been in the garage for about 12 years. I can emai more pic if interested in them. Just let me Know.

Thanks jason

sameyrasmea72 · 09-22-2003, 01:58 AM

and now the pic
I bet your glad I told you it was the botton front of the fender huh....lol....wrong pic but it will work. There is a couple door dings, one of which is at he top of the clip in the white. if you can see it

Ring Master · 09-22-2003, 12:35 PM

do you ever come to the austin area? or can you ship the fender?

sameyrasmea72 · 09-22-2003, 06:14 PM

No, I haven't been to Austin in Years. I have no problem taking the effort to ship the fender to you, but to be honest I have no clue what all is involved: packing, figuring shiping, who to ship it through. BUT I WILL SHIP IT!

How close are you to Abilene? I have a friend who I think is picking up the top and hatch tomorrow in Lubbock. He is going to owe me a favor for ripping me off on the top...lol... I could send the fender with him and you could pick it up at your convience. He is by far and I mean by far the biggest authority on 67-72 that I know personally and he loves to talk and give pointers and has a lot of trucks/parts if you need something.

Don't know if this would work for you but just a thought. Let me ASAP if you can send the money order for sure or not, because if he takes it with him, in the morning it would cost me 40 bucks in gas to go pick it up later on. Thanks Jason

Ring Master · 09-22-2003, 06:25 PM

No Abilene is still a little far. As far as shipping you can send it through Grayhound.

BTW: I just got back from the body shop and they quoted me 2K to fix the rust in my blazer that has to be fixed before I do any thing else. So I am going Body shop hopping tomarrow to get a few more quotes and I will get back to you. Thanks for you time.

sameyrasmea72 · 09-22-2003, 07:03 PM

$2000 just for the rust? ouch! What all does it need?

This probably wont work either, But just thiking out loud. I could sell this one for @1900 (my friends, no title) it's got alot of good parts perfect top/hatch, recovered seats,good doors,1 good fender,very straight bed sides. But it has some rust too( rockers, kick panels). I just cant imagine it costing 2000 to fix the rust.

Dont get me wrong, that might be cheap. I just dont know! This blue might be 3000 to fix. I've just never had to have welding done. ( Luckily I Guess)

Ring Master · 09-22-2003, 07:13 PM

Where is the rust? I might be intersted.

sameyrasmea72 · 09-23-2003, 05:19 AM

RM, I will find/take some pics and email them to you. May take a few days though.

Ring Master · 09-23-2003, 08:14 AM

noproblem

sameyrasmea72 · 10-02-2003, 01:38 AM

Top and hatch are sold, everything else is available.

Ring Master · 10-02-2003, 02:26 PM

Are the doors any good on your friend blazer?

sameyrasmea72 · 10-03-2003, 04:59 AM

RM, I think they are good but he wants to keep it all together.

09-19-2003, 12:13 AM	#1
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Misc. parts fs: blazer top, hatch, AC duct hoses, and others The prices do not include shipping as usual. On the blazer top, I Don't even Know if it is shipable (able to be shipped), but I will help where I can. I think it is a double-wall, but not sure. I could use some help figuring that one out please. Either with a discription of the differences or I also have pics of the front, back, top, sides, just not inside pics yet. I have more pics that i can post or email, but I will use this thread to see who has first go at some thing. Otherwise I am sure I will mess things up. Blazer top with cracked hatch on pass. side hinge.....$250 US Blazer hatch......175 ( I told junkyardjohn he could have the first chance at this when I got ready to sell it, if he is still interested, so... 69-72 drivers side inner\outer fender combo.....125 or100 & 25 very very very nice rust free toolbox trim..... free ( already gone, I wish everything would go that fast or at all) 69-72 console....110 restored, originally blue now black. Chevy emb. not incuded 6 piece AC duct hoses.....38 GM stuff nos? or do they still make it? 2-72 RH armrest 1blk 1brn....8 ea 67-72 (not sure about 67,68) black visors....22 Attached Images

09-19-2003, 12:19 AM	#2
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	pic 2 2 Attached Images

09-19-2003, 12:22 AM	#3
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	3 3 Attached Images

09-19-2003, 12:32 AM	#4
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Last one. original paint Hey guess what. I sold mt truck on ebay. TWICE. Looks like I may have to sell it a 3rd time (somewhere else for sure). Why does someone win an auction and never contact the seller or answer emails. go figure. keep me away from ebay Oh well I am going to feed my dogs now, what are the chances that all this will be sold when I get back. lol Attached Images

09-19-2003, 08:49 AM	#5
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,213	Are those Blazer visors with correct mounting brackets? If so i want first dibs. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

09-19-2003, 09:18 AM	#6
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Rear seat hold downs?

09-19-2003, 12:47 PM	#7
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	2wdblazer, sorry they are just truck visors. Gee_EMM, no hold downs, but i'll keep an eye out for them. I know you've been looking for awhile

09-19-2003, 03:32 PM	#8
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	SAMEYRASMEA72 - SORRY -- TAKE ME OFF THE LIST FOR THE BLAZER HATCH __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

09-19-2003, 11:59 PM	#9
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	hatch anybody?

09-21-2003, 05:29 PM	#10
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	ttt

09-22-2003, 12:57 AM	#11
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	any dents in the outter fender? Might take the A/C ducting and the outter fender. __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-22-2003, 01:55 AM	#12
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Ring Master, This is not a good pic, but it's the best pic of the area in question. This is lower front. In the blue where you see the line, it looks like the bumper tapped the fender at one time. This is by far the worse spot on the fender. It's been in the garage for about 12 years. I can emai more pic if interested in them. Just let me Know. Thanks jason

09-22-2003, 01:58 AM	#13
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	and now the pic I bet your glad I told you it was the botton front of the fender huh....lol....wrong pic but it will work. There is a couple door dings, one of which is at he top of the clip in the white. if you can see it Attached Images Last edited by sameyrasmea72; 09-22-2003 at 02:08 AM.

09-22-2003, 12:35 PM	#14
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	do you ever come to the austin area? or can you ship the fender? __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-22-2003, 06:14 PM	#15
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	No, I haven't been to Austin in Years. I have no problem taking the effort to ship the fender to you, but to be honest I have no clue what all is involved: packing, figuring shiping, who to ship it through. BUT I WILL SHIP IT! How close are you to Abilene? I have a friend who I think is picking up the top and hatch tomorrow in Lubbock. He is going to owe me a favor for ripping me off on the top...lol... I could send the fender with him and you could pick it up at your convience. He is by far and I mean by far the biggest authority on 67-72 that I know personally and he loves to talk and give pointers and has a lot of trucks/parts if you need something. Don't know if this would work for you but just a thought. Let me ASAP if you can send the money order for sure or not, because if he takes it with him, in the morning it would cost me 40 bucks in gas to go pick it up later on. Thanks Jason



Register or Log In To remove these advertisements.

09-22-2003, 06:25 PM	#16
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	No Abilene is still a little far. As far as shipping you can send it through Grayhound. BTW: I just got back from the body shop and they quoted me 2K to fix the rust in my blazer that has to be fixed before I do any thing else. So I am going Body shop hopping tomarrow to get a few more quotes and I will get back to you. Thanks for you time. __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-22-2003, 07:03 PM	#17
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	$2000 just for the rust? ouch! What all does it need? This probably wont work either, But just thiking out loud. I could sell this one for @1900 (my friends, no title) it's got alot of good parts perfect top/hatch, recovered seats,good doors,1 good fender,very straight bed sides. But it has some rust too( rockers, kick panels). I just cant imagine it costing 2000 to fix the rust. Dont get me wrong, that might be cheap. I just dont know! This blue might be 3000 to fix. I've just never had to have welding done. ( Luckily I Guess) Attached Images

09-22-2003, 07:13 PM	#18
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	Where is the rust? I might be intersted. __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-23-2003, 05:19 AM	#19
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	RM, I will find/take some pics and email them to you. May take a few days though.

09-23-2003, 08:14 AM	#20
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	noproblem __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

10-02-2003, 01:38 AM	#21
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Top and hatch are sold, everything else is available. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

10-02-2003, 02:26 PM	#22
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	Are the doors any good on your friend blazer? __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

10-03-2003, 04:59 AM	#23
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	RM, I think they are good but he wants to keep it all together.

Register or Log In To remove these advertisements.