|
06-23-2022, 11:30 AM | #1 |
Registered User
Join Date: Nov 2013
Location: Roseville, CA
Posts: 207
|
Door check repair
Can the door check be removed to repaired without removing the hinge ??
Can it be repaired while in the truck ?? I got the parts from Classic parts All help or info appreciated. |
06-23-2022, 12:09 PM | #2 |
Registered User
Join Date: Sep 2016
Location: Ft Smith, AR
Posts: 565
|
Re: Door check repair
Short answer is yes.
The only issues I had were the roll pins were rusted solid. I used a LONG (like 12" or longer) drill bit (in order to clear the door frame etc with my drill). I replaced them with a different size. It is better if you can get the stock ones out as I think they are tapered vs straight. You pull the stuff out from inside the door and replace the pads. I had to connect them to the A pillar and use the door to get them fully seated. I greased them and worked them back and forth a few times to break them in. |
06-24-2022, 08:22 PM | #3 |
Registered User
Join Date: Nov 2013
Location: Roseville, CA
Posts: 207
|
Re: Door check repair
I finally got it done. Had a hard tine pushing out the roll pin. Had to grind a chisel to fit the tool pin hole & a bigger hammer. Soaked the hole with oil and started pounding. Not that hard of a job jus the roll pin removeal. Also replace the door handle assembly. Two birds one stone
|
Bookmarks |
|
|