|
03-25-2003, 10:12 PM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
|
ball joint help
Well I got under way on my front drop tonight but ran into a problem. I took the cotter pin out of the lower ball joint, went to turn the nut but it kept turning along with the bolt. How do I get this ball joint out? Thanks
__________________
84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi |
|
|
|
03-25-2003, 10:19 PM
|
#2 |
|
Registered User
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
|
What the heck is a pickle fork?
__________________
84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi |
|
|
|
|
03-25-2003, 10:28 PM
|
#3 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
just like a tie rod splitter-its a forked type tool get at autoparts store
|
|
|
|
|
03-25-2003, 10:31 PM
|
#4 |
|
Registered User
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
|
Allrighty...thanks
__________________
84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi |
|
|
|
|
03-25-2003, 11:46 PM
|
#5 |
|
You get what you pay for
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Be real careful and don't take the nut all the way off at first. After the ball joint is loose, put the floor jack under the control arm and slowly lower it down. If you remove the nut all the way, and that sumbiotch decides it wants to turn loose, it's look out Mary. Been there, done that, and don't want to do it ever again. Also, be careful with the coil spring. It's a good idea to chain it in, just in case it decides to fly out. I doubt will, but stranger things have happend. It's always better to be safe over sorry.
__________________
Mike 1985 Chevy C-10 |
|
|
|
|
03-26-2003, 12:20 AM
|
#6 |
|
Registered User
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
|
Ya thanks.....my dad read your site and we chained it up because he was saying how I could be be-headed...ha. I did everything right chained it up and put the floor jack underneath the control arm and was ready to put that new spring in but the nut kept turning with the bolt but now I know what to do. So tommorow I will finish up and get the bed back on and get the truck to the paint shop! I cant wait till its all done
__________________
84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi |
|
|
|
|
03-26-2003, 01:03 AM
|
#7 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
if the ball joint is turning with the nut, then the spindle is already broken loose fron the ball joint and your nut is stuck on the threads. a pickle fork could do the trick though by pushing the spindle up and putting some pressure on the nut so you can get it off.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
|
|
03-26-2003, 04:45 PM
|
#8 |
|
Registered User
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
|
Alright... im gunna work on it later!
__________________
84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
