MD Parting 72 burb - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Getter-Done** · 02-06-2018, 02:43 PM

Quote:

Originally Posted by Getter-Done

I found the total .
Money on the way.
Thanks A lot
Dwayne

Finally got total amount sent.
Thanks
Dwayne

**richard2717** · 03-10-2018, 12:13 PM

Still a few parts left. Cutting up rest of body and frame soon.

67see10 · 03-11-2018, 02:23 AM

pictures of the 3rd door and do you have the spare tire tub?

**richard2717** · 03-11-2018, 09:22 AM

Quote:

Originally Posted by 67see10

pictures of the 3rd door and do you have the spare tire tub?

I have 2 3rd doors and a spare well. i will get pictures up in a little bit.

**richard2717** · 03-11-2018, 12:08 PM

Quote:

Originally Posted by 67see10

pictures of the 3rd door and do you have the spare tire tub?

here are pics of two 3rd doors I have at the moment. Both doors have soft ray glass. I think the blue one is a 72 and the red one is 67-71 based on length of regulator posts

The blue one is in decent shape. There may be some filler in the bottom outer skin but it looks clean inside. It is missing the door lock rod assembly. I still have the other parts. Can sell whole or just bare shell to save on shipping.

.

**richard2717** · 03-11-2018, 12:09 PM

more of the blue door Has a few dents on inner bottom but very useable

.

**richard2717** · 03-11-2018, 12:11 PM

Here is the red door. it has more rust but all the guts are still there.

.

**richard2717** · 03-11-2018, 12:13 PM

here is the inner wheel housing. IT has had 2 patches put in and has a little pitting but still very usable.

.

**hotrodmtodd** · 03-14-2018, 12:30 AM

I am interested in the part you have outlined in the red square for the drivers side if it is reasonable...can pick up if it makes it even more reasonable...need above the dripper to below the seam...kept buying parts trucks to cut one from and wound up fixing up all the parts trucks...hehe...let me know...Thanks, Mike

**richard2717** · 03-14-2018, 06:21 AM

Quote:

Originally Posted by hotrodmtodd

I am interested in the part you have outlined in the red square for the drivers side if it is reasonable...can pick up if it makes it even more reasonable...need above the dripper to below the seam...kept buying parts trucks to cut one from and wound up fixing up all the parts trucks...hehe...let me know...Thanks, Mike

I will check it out this morning to see if it is any good and will report back

RIchard

**richard2717** · 03-14-2018, 03:38 PM

Quote:

Originally Posted by hotrodmtodd

I am interested in the part you have outlined in the red square for the drivers side if it is reasonable...can pick up if it makes it even more reasonable...need above the dripper to below the seam...kept buying parts trucks to cut one from and wound up fixing up all the parts trucks...hehe...let me know...Thanks, Mike

Mike
It looks "ok" in that area except for one small hole on the inner portion where the hatch sits, right at the seam. How far did you need in each direction? I can do the cut for $40 maybe a little less if I don't break any blades, plus shipping.

Richard

.

**Madkidd007** · 12-04-2018, 03:33 AM

Quote:

Originally Posted by richard2717

Mike
It looks "ok" in that area except for one small hole on the inner portion where the hatch sits, right at the seam. How far did you need in each direction? I can do the cut for $40 maybe a little less if I don't break any blades, plus shipping.

Richard

.

Interested if you still have these or more from another vehicle.

**richard2717** · 12-04-2018, 07:55 AM

Quote:

Originally Posted by Madkidd007

Interested if you still have these or more from another vehicle.

do you need both sides? I will need to check condition of the med. green burb and get back to you.

Richard

**richard2717** · 12-04-2018, 02:16 PM

Quote:

Originally Posted by Madkidd007

Interested if you still have these or more from another vehicle.

I just checked mine and it is not in very good shape

**HO455** · 01-18-2019, 05:11 PM

Hello Richard
Any chance you have a Suburban fuel fill left?
Thanks

threeonthetree · 03-14-2018, 10:44 AM

Do you have the steering center link?

**richard2717** · 03-14-2018, 11:47 AM

Quote:

Originally Posted by threeonthetree

Do you have the steering center link?

What year link do you need? I will check to see what, if any i have left.

threeonthetree · 03-14-2018, 10:30 PM

Quote:

Originally Posted by richard2717

What year link do you need? I will check to see what, if any i have left.

Looking for a 71-72 center link

Jgrem · 03-23-2018, 10:50 PM

Do you still have all 4 '72 door panels?

**richard2717** · 03-23-2018, 11:00 PM

Quote:

Originally Posted by Jgrem

Do you still have all 4 '72 door panels?

I will look in the morning and let you know. I don't recall what all I have left.

Thanks Richard

Jgrem · 03-23-2018, 11:05 PM

Thanks. Very interested in them if you do and if shipping to 72153 isn't too crazy.

**richard2717** · 03-24-2018, 08:39 AM

Quote:

Originally Posted by Jgrem

Thanks. Very interested in them if you do and if shipping to 72153 isn't too crazy.

Looks like $32 UPS ground so total would be $182 for all 4 shipped. I do still have them. If you want them my PP is in my signature just click on the link.

Thanks
Richard

**Getter-Done** · 03-24-2018, 09:28 AM

Richard
Thanks for the smooth transaction on the doors and stuff I got from you last month.
Do you have 2 good third door sill plates?

Also I am going to put the fuel tank behind the differential.
Do you have blazer or suburban filler necks (inside covers and body cut for bed) that might help me do this?

**richard2717** · 03-24-2018, 12:10 PM

Quote:

Originally Posted by Getter-Done

Richard
Thanks for the smooth transaction on the doors and stuff I got from you last month.
Do you have 2 good third door sill plates?

Also I am going to put the fuel tank behind the differential.
Do you have blazer or suburban filler necks (inside covers and body cut for bed) that might help me do this?

Dwayne
I should have everything requested. Let me take a look and some pics and will get back to you shortly.

Thanks
Richard

Jgrem · 03-28-2018, 09:49 PM

Quote:

Originally Posted by richard2717

Looks like $32 UPS ground so total would be $182 for all 4 shipped. I do still have them. If you want them my PP is in my signature just click on the link.

Thanks
Richard

Sorry for not responding back sooner. Some things came up and I've been out of pocket. Now I've got to gather up the extra money (again), then I should be able to buy them from you if they're still available at that time.

03-10-2018, 12:13 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,903	Re: Parting 72 burb Still a few parts left. Cutting up rest of body and frame soon. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-11-2018, 02:23 AM	#3
67see10 Registered User Join Date: Jul 2017 Location: FL Born, UT Living Posts: 139	Re: Parting 72 burb pictures of the 3rd door and do you have the spare tire tub?

03-11-2018, 12:09 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,903	Re: Parting 72 burb more of the blue door Has a few dents on inner bottom but very useable . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-11-2018, 12:11 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,903	Re: Parting 72 burb Here is the red door. it has more rust but all the guts are still there. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-11-2018, 12:13 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,903	Re: Parting 72 burb here is the inner wheel housing. IT has had 2 patches put in and has a little pitting but still very usable. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-14-2018, 12:30 AM	#9
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 913	Re: Parting 72 burb I am interested in the part you have outlined in the red square for the drivers side if it is reasonable...can pick up if it makes it even more reasonable...need above the dripper to below the seam...kept buying parts trucks to cut one from and wound up fixing up all the parts trucks...hehe...let me know...Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

01-18-2019, 05:11 PM	#15
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,861	Re: Parting 72 burb Hello Richard Any chance you have a Suburban fuel fill left? Thanks __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-14-2018, 10:44 AM	#16
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: Parting 72 burb Do you have the steering center link? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

03-23-2018, 10:50 PM	#19
Jgrem Registered User Join Date: Jul 2017 Location: shirley arkansas Posts: 3	Re: Parting 72 burb Do you still have all 4 '72 door panels?

03-23-2018, 11:05 PM	#21
Jgrem Registered User Join Date: Jul 2017 Location: shirley arkansas Posts: 3	Re: Parting 72 burb Thanks. Very interested in them if you do and if shipping to 72153 isn't too crazy.

03-24-2018, 09:28 AM	#23
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,790	Re: Parting 72 burb Richard Thanks for the smooth transaction on the doors and stuff I got from you last month. Do you have 2 good third door sill plates? Also I am going to put the fuel tank behind the differential. Do you have blazer or suburban filler necks (inside covers and body cut for bed) that might help me do this?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.