FL parts

[gdavis]

rolling chassis LWB 6 lug 1972 frame with 1968 rear end and 1968 front suspension the rear end has new seals both sides. The front suspension has new ball joints installed. I was going to use but I went and bought a 1972 frame with disk brakes and 5 lug rear. That is why it rears 1972 6 lug. Frame is in good shape. There is a small bend on the frame on the nose about 10 inch fron the front

1972 3 speed granny transmission standard 75.00
1972 stell beel housing 75.00
1972 fly wheel 50.00
1967 poss traction rear end. 3.73 ratio 200.00 sold
rolling chassis without tires and wheels LWB 500.00
1967 small window cab rain gutter is
in bad shape on the pass side.The inside
is in great shape. Needs cab cornors on L/R side.
needs rockers. The floor is in good shape. 100.00
will send pictures if interested.
1971 -1972 front and rear bumper chrome. 50.00 each

[gdavis]

Also a tail gate for a 1968 step side 100.00

[greentruck]

What is the gear ratio of the rear end? Thanks

[leddzepp]

Is the frame SWB or LWB?

[gdavis]

Originally Posted by greentruck

What is the gear ratio of the rear end? Thanks

I dn't know at this moment. I will find out Tuesday and let you know.

[greentruck]

Ok great. It's the posi rear end I'm interested not the rolling chassis. Thanks.
Posted via Mobile Device

[gdavis]

Originally Posted by greentruck

Ok great. It's the posi rear end I'm interested not the rolling chassis. Thanks.
Posted via Mobile Device

The only way, I can tell what ratio the rear is to spin the tire. I made a mark on the tire and the yoke on the front of the rear end. The ratio is 3.75 to 1. If there is another way let me know.

[gdavis]

Originally Posted by greentruck

Ok great. It's the posi rear end I'm interested not the rolling chassis. Thanks.
Posted via Mobile Device

The tire size on the rear end is P225x75R15. That is the size of tire I took the marks for the ratio of the pos rear end.

[gdavis]

Originally Posted by leddzepp

is the frame swb or lwb?

lwb 1972

[greentruck]

It sounds like you have a 3.73 ratio. Another way to tell for sure is to remove the differential cover and read the stamp on the ring gear. For a ratio of 3.73 it would read 41/11. I've got 3.07 gears up front so it wouldnt work for me. Thanks for checking!
Posted via Mobile Device

[gdavis]

Does anyone have a set of 350 chev exhaust manifold. I will be willing to swap some of my parts for. Or buy out right.

[Bpokey]

If possible could I get pictures of the cab? Thanks

[gdavis]

Originally Posted by Bpokey

If possible could I get pictures of the cab? Thanks

here is the pic of the cab. The inside of the cab is in perfect shape. Around the wind shield is spotless. No rust at all. The floor is in good shape. The only damage is exterior.

[gdavis]

Originally Posted by gdavis

here is the pic of the cab. The inside of the cab is in perfect shape. Around the wind shield is spotless. No rust at all. The floor is in good shape. The only damage is exterior.

IfGdavis Homosassa, Florida u want to see more tell me what you want to look at and I will send them.

[Bpokey]

The only other areas I worry about is the firewall and below the dash on the inside. My cab had rusted so bad the windshield wiper motor broke loose. There is also under the dash where the seams meet on either side. Thank you for the information. Brian

[Leroy-B1]

Interested in the rear end how long can it be held until pick up if paid for
Posted via Mobile Device

[FL71C10]

Originally Posted by gdavis

Also a tail gate for a 1968 step side 100.00

What kind of shape is the tailgate in? Any pics?

[FL71C10]

Originally Posted by gdavis

rolling chassis LWB 6 lug 1972 frame with 1968 rear end and 1968 front suspension the rear end has new seals both sides. The front suspension has new ball joints installed. I was going to use but I went and bought a 1972 frame with disk brakes and 5 lug rear. That is why it rears 1972 6 lug. Frame is in good shape. There is a small bend on the frame on the nose about 10 inch fron the front

1972 3 speed granny transmission standard 75.00
1972 stell beel housing 75.00
1972 fly wheel 50.00
1967 poss traction rear end. 3.73 ratio 200.00
rolling chassis without tires and wheels LWB 500.00
1967 small window cab rain gutter is
in bad shape on the pass side.The inside
is in great shape. Needs cab cornors on L/R side.
needs rockers. The floor is in good shape. 100.00
will send pictures if interested.
1971 -1972 front and rear bumper chrome. 50.00 each

Is the rear bumper for a fleetside or stepside?

[72mistressc10]

Interested in front bumper, driver quality, pics?

[gdavis]

Originally Posted by Bpokey

The only other areas I worry about is the firewall and below the dash on the inside. My cab had rusted so bad the windshield wiper motor broke loose. There is also under the dash where the seams meet on either side. Thank you for the information. Brian

here r the pic of the cab again. hope they help.

[gdavis]

Originally Posted by gdavis

here r the pic of the cab again. hope they help.

more cab pictures.

[gdavis]

Originally Posted by FL71C10

What kind of shape is the tailgate in? Any pics?

needs some sand blasting and a little bondo

[gdavis]

Originally Posted by 72mistressc10

Interested in front bumper, driver quality, pics?

front and rear bumper together or will sell seperate.

[gdavis]

Originally Posted by FL71C10

Is the rear bumper for a fleetside or stepside?

pictures of the bumpers

[gdavis]

Originally Posted by Leroy-B1

Interested in the rear end how long can it be held until pick up if paid for
Posted via Mobile Device

as long as you like. which rear end r u talking about I have two.
3.73 pos traction 200.00 sold
regular rear end 150.00 stock