Spindle & coil install question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 01-08-2019, 01:13 AM

I'm working on a C-10. The control arms are original, the spindles drop 2.5", the coil springs are the original height, and the rest is Moog suspension.

I can't lift the truck, there's no weight on the frame. I could wait for the engine, but I'd like to try it with this interior compressor I picked up, and finish the suspension already. My question may be too obvious, but I'll ask. It strikes me I should torque the ball joints onto the spindle and then release the coil spring. Any reason why you'd want to leave some play, and finish torque after the coil spring is released? Thank you.........

Finished the control arms today.

01-08-2019, 01:13 AM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Spindle & coil install question I'm working on a C-10. The control arms are original, the spindles drop 2.5", the coil springs are the original height, and the rest is Moog suspension. I can't lift the truck, there's no weight on the frame. I could wait for the engine, but I'd like to try it with this interior compressor I picked up, and finish the suspension already. My question may be too obvious, but I'll ask. It strikes me I should torque the ball joints onto the spindle and then release the coil spring. Any reason why you'd want to leave some play, and finish torque after the coil spring is released? Thank you......... Finished the control arms today. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.