|
07-16-2007, 09:17 PM
|
#1 |
|
Senior Member
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,269
|
3spd to auto swap
Any easy way to remove the crossmember that supports the bell housing used for a 3speed stick~~~it has 4 huge rivits holding the crossmember to the frame! Will be installing a 350V8 and a 700R4 trans. I have the auto crossmember but am wondering just how to get the original crossmember out without too much tourching~~. Huck
|
|
|
|
07-16-2007, 09:19 PM
|
#2 |
|
72 Chevelle Club
Join Date: Jun 2007
Location: Newton , Iowa
Posts: 2,052
|
Re: 3spd to auto swap
I used a grinder w/cutwheel and a sawzall . It's not fun but not impossible.
__________________
I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker |
|
|
|
|
07-16-2007, 09:38 PM
|
#3 |
|
Registered User
Join Date: Feb 2007
Location: Dallastown , Pa
Posts: 261
|
Re: 3spd to auto swap
I used a 4" angle grinder to take all the heads off the rivets
|
|
|
|
|
07-16-2007, 09:58 PM
|
#4 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,992
|
Re: 3spd to auto swap
I had someone else do it...doesn't get any easier
|
|
|
|
|
07-16-2007, 10:20 PM
|
#5 |
|
Retired Air Force 87-09
Join Date: Feb 2007
Location: Bonaire, Georgia 31005
Posts: 284
|
Re: 3spd to auto swap
The olde heat wrench does well. Not as well as someone else doing it for you.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
