OR Parting out 87 Suburban C20 454 TH400 86k - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drtydog · 08-02-2013, 03:36 PM

How much for shipping to 45238 Cincinnati Ohio for engine stands, mounts and clam shells? If it's not crazy high I will take them!
Thank You

**tll74** · 08-02-2013, 03:59 PM

Quote:

Originally Posted by zaccaglin

Still have the tilt colum by any chance? I would need the collum, shifter, turn signal lever and all internals. No wheel.
Posted via Mobile Device

yes I still have it 225.00 shipped.

Quote:

Originally Posted by l1l

what kind of spare tire it has on this truck?

The spare is long gone. sorry

Quote:

Originally Posted by drtydog

How much for shipping to 45238 Cincinnati Ohio for engine stands, mounts and clam shells? If it's not crazy high I will take them!
Thank You

105.00 shipped

Thanks, Tom

drtydog · 08-05-2013, 06:18 PM

Payment sent yesterday!
Thank you
Posted via Mobile Device

zaccaglin · 08-05-2013, 07:37 PM

Ill have to pass right now. Thanks tho.
Posted via Mobile Device

Leroy-B1 · 08-10-2013, 02:39 PM

How much for the manifolds and frame motor mounts? Also interested in fan shroud and top piece....also do you have any brackets for the 454 you'd part with I have an 84 truck and a 454 motor but need stuff to install it and get it running...truck has a/c need brackets and all to get going shipped to 28787 or Asheville NC greyhound
Posted via Mobile Device

03vorteczr2 · 08-12-2013, 01:22 PM

How much for the door edge stainless trims? Shipping will be to 87567.

Chris

805stickies · 08-12-2013, 09:24 PM

I need the barn door door handle. If you still have let me know.

Thank you,

**tll74** · 08-26-2013, 01:48 AM

Quote:

Originally Posted by Leroy-B1

How much for the manifolds and frame motor mounts? Also interested in fan shroud and top piece....also do you have any brackets for the 454 you'd part with I have an 84 truck and a 454 motor but need stuff to install it and get it running...truck has a/c need brackets and all to get going shipped to 28787 or Asheville NC greyhound
Posted via Mobile Device

84 type exhaust manifolds. 100.00 pair
Rad. top mount. 20.00
Fan shroud. 45.00
454 engine mount set up. 65.00 (sold these already have another set up)
Alt brackets. 25.00
AC brackets for a A6 pump (84 type). 60.00
P/S pump with brackets and remote res. 75.00
Shipping hard to tell with packaging to get weight. probably 75.00ish

Quote:

Originally Posted by 03vorteczr2

How much for the door edge stainless trims? Shipping will be to 87567.

Chris

Front and rear? 15.00 a pair and 15.00 shipping

Quote:

Originally Posted by 805stickies

I need the barn door door handle. If you still have let me know.

Thank you,

Yes I do. 25.00 shipping 8.00

Sorry guys for delayed reponse. Recently had a week vacation and then my work sent me out of town for a few days.
Thanks, Tom

legendman · 09-12-2013, 09:26 PM

Got my seat brackets today, thanks Tom

83GMCK2500 · 10-11-2013, 09:56 PM

Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)?

stueber68 · 10-13-2013, 10:52 PM

How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074?

Nodnarb76 · 10-15-2013, 01:00 AM

Do you still have the air intake hose that goes from the air cleaner to the radiator support?

zaccaglin · 10-18-2013, 02:22 AM

Still have the ac compressor lines that run over the top of the radiator.

**tll74** · 10-19-2013, 11:32 AM

Quote:

Originally Posted by 83GMCK2500

Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)?

140.00 for the inner and outer LH fender. Shipping would be the killer. Where is Ellensburg?

Quote:

Originally Posted by stueber68

How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074?

25.00 shipped on the switch and pigtail.

Quote:

Originally Posted by Nodnarb76

Do you still have the air intake hose that goes from the air cleaner to the radiator support?

Yes I believe so. 20.00 plus shipping

Quote:

Originally Posted by zaccaglin

Still have the ac compressor lines that run over the top of the radiator.

Yes, 40.00 plus shipping.

Thanks, Tom

legendman · 10-19-2013, 12:51 PM

Can you check and see if you have any seat belt buckles, need the ones that stand up by themselves, out of a burb with buckets. Thanks

**tll74** · 10-20-2013, 03:02 AM

Quote:

Originally Posted by legendman

Can you check and see if you have any seat belt buckles, need the ones that stand up by themselves, out of a burb with buckets. Thanks

Sorry, I don't. I looked for you awhile back and didn't have any that had good plastics, they wont stand up. I havent had any sub's since then. I'll continue to keep a eye for you. Thanks, Tom

**gmc 2500 4x4** · 01-26-2014, 04:03 PM

you still have this truck?

**tll74** · 01-27-2014, 02:59 AM

Quote:

Originally Posted by gmc 2500 4x4

you still have this truck?

Yes, your PM returned

**gmc 2500 4x4** · 01-27-2014, 07:30 AM

(Yes I do. 25.00 on the pair of wiper arms, 5.00 on the lighter. The wiring should be there (I think). Shipping 10.00. Thanks, Tom)

i'll take, can you snap a pic of these when you have time? thanx tom...

gmcdeadhead · 02-09-2014, 02:37 PM

would you happen to have the auto trans crossmember. ? thanks

**tll74** · 02-09-2014, 06:12 PM

Quote:

Originally Posted by gmcdeadhead

would you happen to have the auto trans crossmember. ? thanks

Yes I do 40.00 plus shipping.
We got hit hard with a snow storm followed up with a nice dose of freezing rain. I don't have power at home and may not till mid week. There trees on top of power lines everywhere and I live off the beaten path so I'm last on the list so...I may be slow to respond. Thanks, Tom

gmcdeadhead · 02-12-2014, 03:51 AM

if you get a chance can you send a picture of the trans crossmember, thanks

brans72 · 02-12-2014, 08:37 PM

Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?

**aotte1** · 02-13-2014, 12:47 AM

Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them?
Les

**tll74** · 02-15-2014, 02:41 PM

Quote:

Originally Posted by gmcdeadhead

if you get a chance can you send a picture of the trans crossmember, thanks

Sure I'll get a pic for you.

Quote:

Originally Posted by brans72

Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?

Yes it has been sold.

Quote:

Originally Posted by aotte1

Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them?
Les

Yes, I have them. 20.00 plus shipping.

Thanks, Tom

08-02-2013, 03:36 PM	#1
drtydog Registered User Join Date: May 2011 Location: Cincinnati Ohio Posts: 58	Re: Parting out 87 Suburban C20 454 TH400 86k How much for shipping to 45238 Cincinnati Ohio for engine stands, mounts and clam shells? If it's not crazy high I will take them! Thank You __________________

08-05-2013, 06:18 PM	#3
drtydog Registered User Join Date: May 2011 Location: Cincinnati Ohio Posts: 58	Re: Parting out 87 Suburban C20 454 TH400 86k Payment sent yesterday! Thank you Posted via Mobile Device __________________

08-05-2013, 07:37 PM	#4
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: Parting out 87 Suburban C20 454 TH400 86k Ill have to pass right now. Thanks tho. Posted via Mobile Device __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

08-10-2013, 02:39 PM	#5
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting out 87 Suburban C20 454 TH400 86k How much for the manifolds and frame motor mounts? Also interested in fan shroud and top piece....also do you have any brackets for the 454 you'd part with I have an 84 truck and a 454 motor but need stuff to install it and get it running...truck has a/c need brackets and all to get going shipped to 28787 or Asheville NC greyhound Posted via Mobile Device

08-12-2013, 01:22 PM	#6
03vorteczr2 Registered User Join Date: Jan 2011 Location: New Mexico Posts: 23	Re: Parting out 87 Suburban C20 454 TH400 86k How much for the door edge stainless trims? Shipping will be to 87567. Chris

08-12-2013, 09:24 PM	#7
805stickies Registered User Join Date: Jun 2013 Location: Ventura, California Posts: 15	Re: Parting out 87 Suburban C20 454 TH400 86k I need the barn door door handle. If you still have let me know. Thank you,

10-11-2013, 09:56 PM	#10
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: Parting out 87 Suburban C20 454 TH400 86k Left (driver) side fender and inner wheel well availability, condition, pics, price to 98926 (Ellensburg, WA)? __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

10-13-2013, 10:52 PM	#11
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: Parting out 87 Suburban C20 454 TH400 86k How about passenger window switch and pigtail, complete front right vent/wing window assembly, and complete ashtray to 74074? __________________ Ugly or not it still kicks a**!

10-15-2013, 01:00 AM	#12
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Re: Parting out 87 Suburban C20 454 TH400 86k Do you still have the air intake hose that goes from the air cleaner to the radiator support? __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

10-18-2013, 02:22 AM	#13
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: Parting out 87 Suburban C20 454 TH400 86k Still have the ac compressor lines that run over the top of the radiator. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

01-26-2014, 04:03 PM	#17
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Parting out 87 Suburban C20 454 TH400 86k you still have this truck?

01-27-2014, 07:30 AM	#19
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Parting out 87 Suburban C20 454 TH400 86k (Yes I do. 25.00 on the pair of wiper arms, 5.00 on the lighter. The wiring should be there (I think). Shipping 10.00. Thanks, Tom) i'll take, can you snap a pic of these when you have time? thanx tom...

02-09-2014, 02:37 PM	#20
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 87 Suburban C20 454 TH400 86k would you happen to have the auto trans crossmember. ? thanks

02-12-2014, 03:51 AM	#22
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 87 Suburban C20 454 TH400 86k if you get a chance can you send a picture of the trans crossmember, thanks

02-12-2014, 08:37 PM	#23
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: Parting out 87 Suburban C20 454 TH400 86k Know probably already sold but will ask cause scanned through and didn't see it sold just asked about. Do you have the outter trim plastic that covers gauges,radio etc?



Register or Log In To remove these advertisements.

02-13-2014, 12:47 AM	#24
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Parting out 87 Suburban C20 454 TH400 86k Do you have the front frame braces, that are round and go from the engine frame crossmember to the front frame rails. Their are two of them? Les

Register or Log In To remove these advertisements.