Comp Cams Roller Rockers fs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 03-12-2008, 12:27 AM

Here's a set of 1.52 Comp Cams roller tip rockers with 3/8" screw in studs & polly locks included. I would like to say that this set is new, but the guy I got these from put about 1/2 hour of dyno time on them. There is no ware on these & no marks. He went with a different set of heads. I was going to put these on my 383 engine, but I came across a set of full rollers, so these are for sale. I'll take $100 shipped in lower 48 states for the whole setup. I prefer Paypal, but Post Office MO is good. Reply to this thread please.

steve

BarryB · 03-12-2008, 07:10 AM

Don't need them but that is a good deal for somebody. I am thinking I gave 160.00 for the Comp rockers alone from Summit racing. So a very good deal and a Bump for ya.

jlaird · 03-12-2008, 07:39 AM

part #??

70GMCer · 03-12-2008, 03:34 PM

Quote:

Originally Posted by jlaird

part #??

No part number on these. Just stamped Comp Cams & 1.52 inside the rocker. If you wanting a part number, go to Summit or Jegs and maybe they have a number.

70c10 · 03-12-2008, 04:38 PM

Should be 1412-16. I have the same ones

70GMCer · 03-12-2008, 08:06 PM

thanks Jim

724x4a/cchevy · 03-12-2008, 09:12 PM

Wish i had seen this about a month ago. I paid $100 for mine, and i didn't even get studs or the polylocks. This is a good deal!!

jlaird · 03-12-2008, 11:30 PM

I need the self-aligning ones. thats why I was wondering about the part number. These dont look to be self aligning are they?

70GMCer · 03-13-2008, 12:04 AM

couldn't tell you, as I have never had a need to use self aligning rockers. I went to Comp Cams site and they only list self aligning rockers for 88 & up engines. http://www.compcams.com/Technical/Sp...erArmSpecs.asp

70GMCer · 03-13-2008, 01:01 AM

FYI. I'll be away from the computer Wednesday & Thursday this week. I won't be returning any PM's and such.

70GMCer · 03-13-2008, 01:39 AM

Last time, lowered to $90 firm, shipped in lower 48. Ebay next.

HavinSomeFun · 03-13-2008, 06:02 AM

Send me your paypal and I'll take them. Not sure what I will do with them. However, I'm sure I will build another engine soon.

70GMCer · 03-13-2008, 03:40 PM

Sold, pending payment from "HavinSomeFun"

PM sent

HavinSomeFun · 03-13-2008, 04:54 PM

money sent

70GMCer · 03-13-2008, 05:57 PM

Sold!!

03-12-2008, 12:27 AM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Comp Cams Roller Rockers fs Here's a set of 1.52 Comp Cams roller tip rockers with 3/8" screw in studs & polly locks included. I would like to say that this set is new, but the guy I got these from put about 1/2 hour of dyno time on them. There is no ware on these & no marks. He went with a different set of heads. I was going to put these on my 383 engine, but I came across a set of full rollers, so these are for sale. I'll take $100 shipped in lower 48 states for the whole setup. I prefer Paypal, but Post Office MO is good. Reply to this thread please. steve Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 03-12-2008 at 12:46 AM.

03-12-2008, 07:10 AM	#2
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: Comp Cams Roller Rockers fs Don't need them but that is a good deal for somebody. I am thinking I gave 160.00 for the Comp rockers alone from Summit racing. So a very good deal and a Bump for ya. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

03-12-2008, 07:39 AM	#3
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Comp Cams Roller Rockers fs part #??

03-12-2008, 04:38 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Comp Cams Roller Rockers fs Should be 1412-16. I have the same ones __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-12-2008, 08:06 PM	#6
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs thanks Jim __________________ 1997 GMC Sierra Ext 1965 Mustang

03-12-2008, 09:12 PM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Comp Cams Roller Rockers fs Wish i had seen this about a month ago. I paid $100 for mine, and i didn't even get studs or the polylocks. This is a good deal!! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

03-12-2008, 11:30 PM	#8
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Comp Cams Roller Rockers fs I need the self-aligning ones. thats why I was wondering about the part number. These dont look to be self aligning are they?

03-13-2008, 12:04 AM	#9
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs couldn't tell you, as I have never had a need to use self aligning rockers. I went to Comp Cams site and they only list self aligning rockers for 88 & up engines. http://www.compcams.com/Technical/Sp...erArmSpecs.asp __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 03-13-2008 at 12:05 AM.

03-13-2008, 01:01 AM	#10
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs FYI. I'll be away from the computer Wednesday & Thursday this week. I won't be returning any PM's and such. __________________ 1997 GMC Sierra Ext 1965 Mustang

03-13-2008, 01:39 AM	#11
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs Last time, lowered to $90 firm, shipped in lower 48. Ebay next. __________________ 1997 GMC Sierra Ext 1965 Mustang

03-13-2008, 06:02 AM	#12
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Comp Cams Roller Rockers fs Send me your paypal and I'll take them. Not sure what I will do with them. However, I'm sure I will build another engine soon. __________________ a green one with some stuff done to it....

03-13-2008, 03:40 PM	#13
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs Sold, pending payment from "HavinSomeFun" PM sent __________________ 1997 GMC Sierra Ext 1965 Mustang

03-13-2008, 04:54 PM	#14
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Comp Cams Roller Rockers fs money sent __________________ a green one with some stuff done to it....

03-13-2008, 05:57 PM	#15
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Comp Cams Roller Rockers fs Sold!! __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.