![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2004
Location: Idaho
Posts: 640
|
Tailgate Question
When I purchased my '70 CST/20 it was missing it's tailgate (had camper equipment in place of it). I am guess that since it has upper and lower trim with woodgrain on it, that the tailgate probably had the woodgrain trim as well?
My question is, can I buy just the cheap reproduction tailgate (the $179 kind)with no lettering, and then screw on the woodgrain trim later? Or will this not work because the repro tailgates have no holes for trim? |
![]() |
![]() |
![]() |
#2 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
I thought the tailgate just had the aluminum trim. But to answer your question about the holes, I guess you could drill the holes and add the clips and trim pieces but I think it might look funny without the stamped letters in the center.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2004
Location: Idaho
Posts: 640
|
Well that's kind of my question. There are several kinds of tailgates, the kind with stamped letters but then the kind with a stripe of woodgrain across the gate with chrome "Chevrolet" letters. I would guess that a blank tailgate you could add this woodgrain stripe?
Here's a pic of what I'm talking about. I don't see any vendors that sell tailgates like this. That's kind of what leads me to believe I can buy an empty/flat tailgate and screw on this trim? But I am not sure it can be done... |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,527
|
My truck came stock with the woodgrain panel on the tailgate. It only had the upper trim in line with the handle, and not the lower trim as seen in the above picture. This is the first time I've seen a tailgate with all three pieces. The only time I've seen the lower trim strip is when the tailgate doesn't have the woodgrain panel.
|
![]() |
![]() |
![]() |
#5 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
I forgot about those tailgate bands.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#6 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Your tailgate should have the woodgrain center with the 3 piece upper trim like pjmoreland explained. The trim, tailgate, and center panels are all sold seperately. If you are going to use the center woodgrain panel then a $179.95 plain tailgate will work for you. The woodgrain tailgate band will cover the area where the letters are. As for the holes for the trim, you will have to drill them yourself, because wether the new tailgate has letters or not, they do not come predrilled for the trim. WES www.ClassicHeartbeat.com
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,527
|
I believe the woodgrain panel is held on by sheetmetal screws.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|