Plasma Cutter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 01-07-2009, 11:33 AM

Want to trade a nearly new $4000 Snap-On Plasma cutter for some nice 20" wheels or wheels and tires for my 72 Cheyenne Super project. The plasma has about 6 hrs. of use on it and is basically brand new. Looking for something open faced with a 5x5 bolt pattern. Please let me know if you have something you would be interested in trading. Thanks--Josh

Will also consider trades for a nice engine/trans combo or a very solid complete short fleet bed.

http://buy1.snapon.com/catalog/item....re&dir=catalog

**DANTIP** · 01-07-2009, 11:52 AM

I am returning my truck to stock and have virtually new (less than 2k miles) on the wheels and tires shown. If interested I will get sizes/details for you.

STOCKISH · 01-07-2009, 12:06 PM

Yea, let me know what brand and size they are. Tire size also please.

STOCKISH · 01-07-2009, 12:08 PM

Will also sell outright for half of my investment. Will take $2000. That will include shipping if it doesnt kill me too bad.

**DANTIP** · 01-08-2009, 08:51 AM

The wheels are American racing Hopster-S with Carlisle Spinners. The front wheels/tires are 17" x 7" (5" x 5") with 265/60R17 Kumho-S directional radials. The rear wheels/tires are 17" x 8" (5" x 5") with 285/60R17 Kumho-S directional radials.

Each of the wheels also have American Racing "Carlisle-Spinners" on the center and the lug nuts are included.

Please see the link below for photos of the wheels.

http://www.americanracingwheelsinfo....ng_Hopster.htm

Please let me know if you have further interest.

Dan Tippmann

STOCKISH · 01-08-2009, 10:50 AM

Those are some nice looking wheels for sure. I think I'm going to have to hold out for some 20s still though. Let me know if you decide to sell outright, I know someone who might be interested. Thanks for your time.--Josh

silverboy02 · 01-08-2009, 04:20 PM

I have a set of Boss 335 20x8.5 Chrome wheels with Falken 275/45r20 tires. All brand new still have stickers, never mounted on the truck. Give me your email address and I will send you some pictures.

silverboy02 · 01-08-2009, 04:22 PM

http://www.bossmotorsports.com/custo...els.cfm?id=358

this is a link to the wheels on Boss' website. the ones I have are the chrome ones. PM me with email info.

STOCKISH · 01-08-2009, 04:25 PM

PM sent. Very interested.

STOCKISH · 01-10-2009, 10:27 PM

Well, unfortunately the Boss wheels aren't goint to work out for me with the look I am going for. So, well take it back to the top.

STOCKISH · 01-11-2009, 09:38 PM

Bump

STOCKISH · 01-13-2009, 04:03 PM

PM's returned. TTT

wnc mountain · 01-13-2009, 05:27 PM

Trade ya a whole 70 GMC lwb 350/350 truck stock. has typical rust.

STOCKISH · 01-13-2009, 10:06 PM

Lets see some pictures. The more the better. PM Sent

ah_5500 · 01-13-2009, 10:33 PM

20 inch american racing torque thrust 2's with new 255 35 20 tires?

ah_5500 · 01-13-2009, 10:33 PM

email me if interested ah_5500@comcast.net

STOCKISH · 01-13-2009, 11:02 PM

E-mail sent.

STOCKISH · 01-17-2009, 10:58 AM

Bump for the weekend crowd.

STOCKISH · 01-21-2009, 11:10 AM

Ttt

hensonjd · 02-11-2009, 01:04 AM

did you ever sale our plasma cutter

STOCKISH · 02-11-2009, 08:52 AM

Traded for a LT1 and 4l60e and cash

01-07-2009, 11:33 AM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Plasma Cutter Want to trade a nearly new $4000 Snap-On Plasma cutter for some nice 20" wheels or wheels and tires for my 72 Cheyenne Super project. The plasma has about 6 hrs. of use on it and is basically brand new. Looking for something open faced with a 5x5 bolt pattern. Please let me know if you have something you would be interested in trading. Thanks--Josh Will also consider trades for a nice engine/trans combo or a very solid complete short fleet bed. http://buy1.snapon.com/catalog/item....re&dir=catalog __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-07-2009, 11:52 AM	#2
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Plasma Cutter I am returning my truck to stock and have virtually new (less than 2k miles) on the wheels and tires shown. If interested I will get sizes/details for you. Attached Images

01-07-2009, 12:06 PM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Yea, let me know what brand and size they are. Tire size also please. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 01-07-2009 at 12:06 PM.

01-07-2009, 12:08 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Will also sell outright for half of my investment. Will take $2000. That will include shipping if it doesnt kill me too bad. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-08-2009, 08:51 AM	#5
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Re: Plasma Cutter The wheels are American racing Hopster-S with Carlisle Spinners. The front wheels/tires are 17" x 7" (5" x 5") with 265/60R17 Kumho-S directional radials. The rear wheels/tires are 17" x 8" (5" x 5") with 285/60R17 Kumho-S directional radials. Each of the wheels also have American Racing "Carlisle-Spinners" on the center and the lug nuts are included. Please see the link below for photos of the wheels. http://www.americanracingwheelsinfo....ng_Hopster.htm Please let me know if you have further interest. Dan Tippmann

01-08-2009, 10:50 AM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Those are some nice looking wheels for sure. I think I'm going to have to hold out for some 20s still though. Let me know if you decide to sell outright, I know someone who might be interested. Thanks for your time.--Josh __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-08-2009, 04:20 PM	#7
silverboy02 Registered User Join Date: May 2008 Location: Grenada, MS Posts: 127	Re: Plasma Cutter I have a set of Boss 335 20x8.5 Chrome wheels with Falken 275/45r20 tires. All brand new still have stickers, never mounted on the truck. Give me your email address and I will send you some pictures.

01-08-2009, 04:22 PM	#8
silverboy02 Registered User Join Date: May 2008 Location: Grenada, MS Posts: 127	Re: Plasma Cutter http://www.bossmotorsports.com/custo...els.cfm?id=358 this is a link to the wheels on Boss' website. the ones I have are the chrome ones. PM me with email info.

01-08-2009, 04:25 PM	#9
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter PM sent. Very interested. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-10-2009, 10:27 PM	#10
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Well, unfortunately the Boss wheels aren't goint to work out for me with the look I am going for. So, well take it back to the top. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-11-2009, 09:38 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Bump __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-13-2009, 04:03 PM	#12
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter PM's returned. TTT __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-13-2009, 05:27 PM	#13
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	Re: Plasma Cutter Trade ya a whole 70 GMC lwb 350/350 truck stock. has typical rust. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

01-13-2009, 10:06 PM	#14
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Lets see some pictures. The more the better. PM Sent __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-13-2009, 10:33 PM	#15
ah_5500 Registered User Join Date: Nov 2008 Location: knoxville, tn Posts: 155	Re: Plasma Cutter 20 inch american racing torque thrust 2's with new 255 35 20 tires?



Register or Log In To remove these advertisements.

01-13-2009, 10:33 PM	#16
ah_5500 Registered User Join Date: Nov 2008 Location: knoxville, tn Posts: 155	Re: Plasma Cutter email me if interested ah_5500@comcast.net

01-13-2009, 11:02 PM	#17
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter E-mail sent. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-17-2009, 10:58 AM	#18
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Bump for the weekend crowd. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-21-2009, 11:10 AM	#19
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Ttt __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-11-2009, 01:04 AM	#20
hensonjd Registered User Join Date: Jul 2008 Location: Buffalo, Tx Posts: 422	Re: Plasma Cutter did you ever sale our plasma cutter

02-11-2009, 08:52 AM	#21
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Plasma Cutter Traded for a LT1 and 4l60e and cash __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.