Lots of large parts, NJ Carlise PA Englishtown - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**6t727t2** · 04-01-2007, 12:01 PM

Trying something that could be complicated here. I have a lot of large non-shippable parts to list. I will have pics, price & descip of everything. You can 1. pickup the parts in central NJ zip 08015. or 2. pickup the parts at Spring Carlisle, Fri the 20th only, or 3. Pickup the parts in Englishtown NJ swap meet Fri. the 27th or Sun the 29th only. I don't have a vender space at either, but maybe someone can suggest a central meeting spot nearby either event? Delivery to Carlisle or Englishtown will be free, but require a 50% deposit, if you don't like the part at time of pickup, I will refund your deposit. Please post here first, then PM or email hchconst@comcast.net or call 609-670-7925 Thanks, Harry. Here goes. Part # 001 White 71/72? door shell, has had work done, needs finishing, $60.

**6t727t2** · 04-01-2007, 12:07 PM

10,000 lb. heavy duty hitch, removed from '71 K-10, direct bolt-on. $40.

**jimer1964** · 04-01-2007, 12:27 PM

hi harry,interested in tailgate is it have more weight to it compared to a repo ? thanks jim

**jimer1964** · 04-01-2007, 12:43 PM

thanks harry, keep me posted jim

**6t727t2** · 04-01-2007, 01:02 PM

Will need a little bottom work, not bad. $125

**6t727t2** · 04-01-2007, 01:07 PM

more burb 3rd door pics

**6t727t2** · 04-01-2007, 01:16 PM

Very nice original burb tailgate. Only defect (minor) I see are small ridges? where the original spot welds are along a small section (the primered looking area at the bottom. Oterwise, this is one of the nicest original burb tailgates I have seen. $250.

**6t727t2** · 04-01-2007, 01:22 PM

more pics burb green gate # 006

**6t727t2** · 04-01-2007, 01:34 PM

more pics green burb gate # 006

**6t727t2** · 04-01-2007, 01:39 PM

green burb gate # 006 last pics

**6t727t2** · 04-01-2007, 01:55 PM

Roof from a '71 super cheyenne, dent on driver side, center area is light surface rust, not damage, use as a roof replacement or patch for cab light roof. $125

**6t727t2** · 04-01-2007, 02:05 PM

more pics black roof # 007

**6t727t2** · 04-01-2007, 02:11 PM

007 black roof pics

**6t727t2** · 04-01-2007, 02:16 PM

Good for an outer patch panel only, because of inside lip rust. $40.

**6t727t2** · 04-01-2007, 02:24 PM

Nice original vinyl/fabric green burb 3rd seat. No rips or tears, clean up and use as is, or recover. Nice foam and attached brackets. $100.

**6t727t2** · 04-01-2007, 02:45 PM

Bought this years ago as NOS, no sticker, so I'm not sure. If you have a way to tell from repro let me know. No damage, light surface/storage rust. Anyway, $450.

**6t727t2** · 04-01-2007, 02:53 PM

More pics swb side

**6t727t2** · 04-01-2007, 02:59 PM

last pics swb bedside

msgross · 04-03-2007, 10:10 PM

Email sent for wood front panel and good tailgate... Will meet in Carlisle (National Guard Armory is good)

**jimer1964** · 04-03-2007, 11:02 PM

looks like a winner harry!i will take it. i will give you a call 4/4/07 to work out pick up details thanks jimer.

**special-K** · 04-04-2007, 08:13 AM

How long have you had that bedside?I`m rackin`my brain to recall the year the repros came out.I bought some California ones the same year.

msgross · 04-04-2007, 08:29 AM

also might be interested in the pass door shell...

**6t727t2** · 04-05-2007, 10:02 AM

Tim,
I bought it 6yrs ago, guy said he had it at least 10 yrs? I'm going to put it next to a an original bed this weekend to compare. The repro vs. original tailgate was a no-brainer.
Harry

msgross · 04-05-2007, 10:34 AM

Harry, per our conversation keep me in line for the red gate (pending others that you may have) and bed front panel for Carlisle. I'll send deposit after you check on the gates. thanks..

mike

71cadc10 · 04-11-2007, 08:19 AM

Harry,

Would you by chance be able to cut me some sections of steel bed floor (I'm working on a fleetside longbed)? I'll be at Carlisle on Friday and can pickup. Need a couple sections 2x2' or larger if might have a bed for cutting up.

Thanks
Andy

04-01-2007, 12:01 PM	#1
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	Lots of large parts, NJ Carlise PA Englishtown Trying something that could be complicated here. I have a lot of large non-shippable parts to list. I will have pics, price & descip of everything. You can 1. pickup the parts in central NJ zip 08015. or 2. pickup the parts at Spring Carlisle, Fri the 20th only, or 3. Pickup the parts in Englishtown NJ swap meet Fri. the 27th or Sun the 29th only. I don't have a vender space at either, but maybe someone can suggest a central meeting spot nearby either event? Delivery to Carlisle or Englishtown will be free, but require a 50% deposit, if you don't like the part at time of pickup, I will refund your deposit. Please post here first, then PM or email hchconst@comcast.net or call 609-670-7925 Thanks, Harry. Here goes. Part # 001 White 71/72? door shell, has had work done, needs finishing, $60. Attached Images

04-01-2007, 12:07 PM	#2
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	part# 002 10,000 lb. heavy duty hitch, removed from '71 K-10, direct bolt-on. $40. Attached Images

04-01-2007, 12:27 PM	#3
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: Lots of large parts, NJ Carlise PA Englishtown hi harry,interested in tailgate is it have more weight to it compared to a repo ? thanks jim

04-01-2007, 12:43 PM	#4
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: Lots of large parts, NJ Carlise PA Englishtown thanks harry, keep me posted jim

04-01-2007, 01:02 PM	#5
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	Part# 005 bronze burb 3rd door Will need a little bottom work, not bad. $125 Attached Images

04-01-2007, 01:07 PM	#6
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	more pics #005 burb 3rd door more burb 3rd door pics Attached Images

04-01-2007, 01:16 PM	#7
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	Very nice green burb tailgate, part# 005 Very nice original burb tailgate. Only defect (minor) I see are small ridges? where the original spot welds are along a small section (the primered looking area at the bottom. Oterwise, this is one of the nicest original burb tailgates I have seen. $250. Attached Images

04-01-2007, 01:22 PM	#8
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	more pics green burb gate # 006 more pics burb green gate # 006 Attached Images

04-01-2007, 01:34 PM	#9
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	more pics green burb gate more pics green burb gate # 006 Attached Images

04-01-2007, 01:39 PM	#10
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	green burb gate #006 last pics green burb gate # 006 last pics Attached Images

04-01-2007, 01:55 PM	#11
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	part# 007, '71 cab light roof Roof from a '71 super cheyenne, dent on driver side, center area is light surface rust, not damage, use as a roof replacement or patch for cab light roof. $125 Attached Images

04-01-2007, 02:05 PM	#12
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	more pics black roof # 007 more pics black roof # 007 Attached Images

04-01-2007, 02:11 PM	#13
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	007 last pics 007 black roof pics Attached Images

04-01-2007, 02:16 PM	#14
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	008 purple cab light roof patch panel Good for an outer patch panel only, because of inside lip rust. $40. Attached Images

04-01-2007, 02:24 PM	#15
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	part# 009 green burb 3rd seat Nice original vinyl/fabric green burb 3rd seat. No rips or tears, clean up and use as is, or recover. Nice foam and attached brackets. $100. Attached Images



Register or Log In To remove these advertisements.

04-01-2007, 02:45 PM	#16
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	# 010 nos? swb left side bed panel Bought this years ago as NOS, no sticker, so I'm not sure. If you have a way to tell from repro let me know. No damage, light surface/storage rust. Anyway, $450. Attached Images

04-01-2007, 02:53 PM	#17
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	more pics #010 swb side More pics swb side Attached Images

04-01-2007, 02:59 PM	#18
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	last pics #010 swb last pics swb bedside Attached Images

04-03-2007, 10:10 PM	#19
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Lots of large parts, NJ Carlise PA Englishtown Email sent for wood front panel and good tailgate... Will meet in Carlisle (National Guard Armory is good) __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-03-2007, 11:02 PM	#20
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: Lots of large parts, NJ Carlise PA Englishtown looks like a winner harry!i will take it. i will give you a call 4/4/07 to work out pick up details thanks jimer.

04-04-2007, 08:13 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: Lots of large parts, NJ Carlise PA Englishtown How long have you had that bedside?I`m rackin`my brain to recall the year the repros came out.I bought some California ones the same year. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-04-2007, 08:29 AM	#22
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Lots of large parts, NJ Carlise PA Englishtown also might be interested in the pass door shell... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-05-2007, 10:02 AM	#23
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,428	Re: Lots of large parts, NJ Carlise PA Englishtown Tim, I bought it 6yrs ago, guy said he had it at least 10 yrs? I'm going to put it next to a an original bed this weekend to compare. The repro vs. original tailgate was a no-brainer. Harry

04-05-2007, 10:34 AM	#24
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Lots of large parts, NJ Carlise PA Englishtown Harry, per our conversation keep me in line for the red gate (pending others that you may have) and bed front panel for Carlisle. I'll send deposit after you check on the gates. thanks.. mike __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-11-2007, 08:19 AM	#25
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Re: Lots of large parts, NJ Carlise PA Englishtown Harry, Would you by chance be able to cut me some sections of steel bed floor (I'm working on a fleetside longbed)? I'll be at Carlisle on Friday and can pickup. Need a couple sections 2x2' or larger if might have a bed for cutting up. Thanks Andy __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

Register or Log In To remove these advertisements.