TN WTB 81 - 87 rust free swb wide box or rust free bedsides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**partzpal** · 10-12-2020, 10:10 PM

ISO complete rust free short wide bed for my 84 swb or rust free bedsides. Open to panels requiring minimal repairs as long as the panels haven't been repaired previously.

**71blksuper4x4** · 10-13-2020, 01:09 PM

Have you looked into the newer stamped bedsides that are offered? I recently bought a set and the gauge of metal used was definitely thicker than I had once bought.

**partzpal** · 10-14-2020, 03:58 AM

I have thought about but would like to keep all GM parts on the truck. I've attempted to use an aftermarket bedside on another truck I built a few years back but it didn't fit and I wasn't satisfied. I do appreciate the thought......

44th Miss Inf · 10-15-2020, 09:32 AM

Partzpal,

I’ve been in your area for a few days (currently in Lawrenceburg) and there doesn’t seem to be the square bodies here like there used to be. I’ve been coming to this area for over 25 years. Probably like around home (SW MS) and they are getting totally worn out or scrapped.

**partzpal** · 10-16-2020, 11:36 AM

You’re correct there aren’t many sitting around or on the road for that matter in this area anymore.

44th Miss Inf · 10-16-2020, 03:43 PM

I may have a good driver’s, give me a few days as it will be at my other property. I should be back up before Thanksgiving but for sure before Christmas and will ask around down here in case I don’t have one

**DPowers** · 10-16-2020, 07:03 PM

Square Body Garage
Washburn TN
Darren Singleton
865 712 0926

Colesnsty68 · 10-17-2020, 11:11 PM

Quote:

Originally Posted by 71blksuper4x4

Have you looked into the newer stamped bedsides that are offered? I recently bought a set and the gauge of metal used was definitely thicker than I had once bought.

Who did you buy them from? TIA

**71blksuper4x4** · 10-18-2020, 12:23 PM

Quote:

Originally Posted by Colesnsty68

Who did you buy them from? TIA

I got them through classic parts. They were cheaper than lmc. LMC has TriPlus sides and were thick like these as well, just higher price. I am about an hour and a half from both, and I could save from shipping. I also like walking around the showroom at Classic Parts. Before these sides, I had a pair of LMC’s bedsides before the retool. They were a lot thinner. Probably a 20-24 gauge thickness. The new ones have more of an OEM feel.

**partzpal** · 10-20-2020, 10:12 AM

Thanks to all for the info. 44th I'll give you time to search for and get with you early next week if that works or pm me thru the site.

10-12-2020, 10:10 PM	#1
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	WTB 81 - 87 rust free swb wide box or rust free bedsides ISO complete rust free short wide bed for my 84 swb or rust free bedsides. Open to panels requiring minimal repairs as long as the panels haven't been repaired previously.

10-13-2020, 01:09 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides Have you looked into the newer stamped bedsides that are offered? I recently bought a set and the gauge of metal used was definitely thicker than I had once bought. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-14-2020, 03:58 AM	#3
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides I have thought about but would like to keep all GM parts on the truck. I've attempted to use an aftermarket bedside on another truck I built a few years back but it didn't fit and I wasn't satisfied. I do appreciate the thought......

10-15-2020, 09:32 AM	#4
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides Partzpal, I’ve been in your area for a few days (currently in Lawrenceburg) and there doesn’t seem to be the square bodies here like there used to be. I’ve been coming to this area for over 25 years. Probably like around home (SW MS) and they are getting totally worn out or scrapped.

10-16-2020, 11:36 AM	#5
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides You’re correct there aren’t many sitting around or on the road for that matter in this area anymore.

10-16-2020, 03:43 PM	#6
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides I may have a good driver’s, give me a few days as it will be at my other property. I should be back up before Thanksgiving but for sure before Christmas and will ask around down here in case I don’t have one

10-16-2020, 07:03 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides Square Body Garage Washburn TN Darren Singleton 865 712 0926 __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

10-20-2020, 10:12 AM	#10
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	Re: WTB 81 - 87 rust free swb wide box or rust free bedsides Thanks to all for the info. 44th I'll give you time to search for and get with you early next week if that works or pm me thru the site.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.