The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-01-2024, 07:57 AM   #1
don t. - 72gmc
Registered User
 
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 393
Electronic ignition

It's been a long time since I played down this road. Some terminology may not be correct.

Vehicle has a 327, seems to be factory electronic ignition. I seem to have no spark at the plugs. Cap, rotor, look ok. Removed coil cover. Checked wires, seem to be good here too.

Removed coil. Removed black washer/insulator. Removed spring but a part was left in the dizzy....


Looks like it's broke....


Would this be my issue?
If yes, what is the name of this part?

Thanks much...Don.
don t. - 72gmc is offline   Reply With Quote
Old 11-01-2024, 02:09 PM   #2
Willshook
Registered User
 
Join Date: Jun 2019
Location: Chehalis, WA
Posts: 50
Re: Electronic ignition

Thats the carbon button that connects the center tower in the cap to the rotor. It's usually positively retained in the cap - not sure it can be replaced outside of replacing the cap...?
Willshook is offline   Reply With Quote
Old 11-01-2024, 05:15 PM   #3
MySons68C20
Senior Member
 
MySons68C20's Avatar
 
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 925
Re: Electronic ignition

Replace the cap. Great pics btw.
MySons68C20 is offline   Reply With Quote
Old 11-02-2024, 06:41 AM   #4
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,590
Re: Electronic ignition

That part being broken is consistent with your no spark symptom.
Dead Parrot is offline   Reply With Quote
Old 11-02-2024, 07:10 AM   #5
don t. - 72gmc
Registered User
 
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 393
Re: Electronic ignition

Thank you all.
Very much appreciated...Don.
don t. - 72gmc is offline   Reply With Quote
Old 11-02-2024, 01:56 PM   #6
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,721
Re: Electronic ignition

Is this factory electronic ignition actually a transistorized ignition? Or just an hei.
It might be worth a chunk of change!

You got pics of it?

Last edited by geezer#99; 11-02-2024 at 02:28 PM.
geezer#99 is online now   Reply With Quote
Old 11-03-2024, 08:25 AM   #7
don t. - 72gmc
Registered User
 
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 393
Re: Electronic ignition

IIRC it's a GM HEI. This is the best pic I got....


FWIW....Im not a mechanic outside of shade tree maintenance. This issue is in the wife's toy....


She likes it...Don.
don t. - 72gmc is offline   Reply With Quote
Old 11-03-2024, 08:52 AM   #8
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,721
Re: Electronic ignition

Yup, just an hei!
geezer#99 is online now   Reply With Quote
Old 11-03-2024, 06:20 PM   #9
Willshook
Registered User
 
Join Date: Jun 2019
Location: Chehalis, WA
Posts: 50
Re: Electronic ignition

Don't see too many of those - nice!

Make sure the HEI is getting a full 12V as well.
Willshook is offline   Reply With Quote
Old 11-06-2024, 08:55 AM   #10
don t. - 72gmc
Registered User
 
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 393
Re: Electronic ignition

Quote:
Originally Posted by Willshook View Post
Make sure the HEI is getting a full 12V as well.
I put a meter on the power to coil wire.
I got 11.74 volts.
At the battery I get 12.6 volts.
Is 11.74 close enough?

Thanks much...Don.
don t. - 72gmc is offline   Reply With Quote
Old 11-06-2024, 10:41 AM   #11
Willshook
Registered User
 
Join Date: Jun 2019
Location: Chehalis, WA
Posts: 50
Re: Electronic ignition

Quote:
Originally Posted by don t. - 72gmc View Post
I put a meter on the power to coil wire.
I got 11.74 volts.
At the battery I get 12.6 volts.
Is 11.74 close enough?

Thanks much...Don.
It's usually best to just run a wire directly to the IGN UNFUSED spade on the fuse block. Only takes a few minutes.
Willshook is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com