TX 67 swb bed,68 fenders,doors,frame 67 clip and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WILD WILLIE · 12-30-2010, 10:53 AM

Heres a list of what i can remember
67 swb step side bed (needs floor) 400.00 reduced bed 350.00sold
68 chevy fenders in excellent shape no rust or dents 200.00
68-72 stepside fenders(no spare cut out) 150.00 set SOLD
swb frame straight 350.00 SOLD
67 doors no speaker holes or rust 200.00 set reduced 175.00
70 doors with speaker holes and no rust 200.00 set reduced 175.00
67 clip complete has rust in core support and lower right fender and inner fender well but still repairable 200.00 sold
68 cab with title has rust in rockers i removed drivers side and drivers cab coner needs to be repaired 200.00 with title sold
5lug front end setup have 2 sets upper and lower a-arms and spindles,rotors and calipers 75.00 a set 1 set sold
cowl panel with antenna hole 15.00
tilt van colums tight with wheels 125.00 each sold
have some 70 emblems and other misc parts

JUST ARRIVED 67 OR 68 HOOD 65.00 NICE
PASS SIDE 68 DOOR EXCELLENT SHAPE 75.00
DRIVERS SIDE 68 FRONT FENDER NEW BUT HAS BEEN MOUNTED AND INNER FENDERWELL 100.00
AND SOME OTHER MISC PARTS
cell # 940-733-8076
prefer not to ship live in county hard to get fright company to pickup

WILD WILLIE · 12-30-2010, 10:56 AM

Here are the pics

my67chevytruck · 12-30-2010, 12:55 PM

any pics of the rust on the front clip. I would like to see the extent of the rust please.

WILD WILLIE · 12-30-2010, 01:38 PM

not any pics at this time but the right fender will need the bottom cup under the battery replaced and the core support needs to be repaired on the pass side also its all the way thru and inner fender where it bolts on to the core supportis rusted also. and the drivers inner fender wellhas been cut where the colum goes past it. the clip is in good shape

allengator · 12-30-2010, 04:09 PM

Quote:

Originally Posted by WILD WILLIE

swb frame straight 350.00

rolling chassis or bare frame?

WILD WILLIE · 12-30-2010, 04:21 PM

bare frame

projectjimmie68 · 12-30-2010, 04:25 PM

I am in need of metal door panels. Do you have if so how much plus shipping to zip 32136? Thanks

67chevy1series · 12-30-2010, 05:53 PM

would you be interested in selling the passenger fender seperate if so do you have any pictures of the 67 passenger fender

mahanian · 12-30-2010, 06:03 PM

I'm interested in the 67 doors if you change your mind about shipping them. I shipped a pair a couple years ago via UPS to Canada with no issues.

rich67 · 12-30-2010, 08:29 PM

what about 67 drivers side fender. shape? price? thanx rich

matt67350 · 12-30-2010, 11:40 PM

I'll take the 68 fenders.

WILD WILLIE · 12-31-2010, 01:29 PM

Quote:

Originally Posted by matt67350

I'll take the 68 fenders.

So when you want to come get them? My cell is 940-733-8076

WILD WILLIE · 12-31-2010, 01:31 PM

Quote:

Originally Posted by 67chevy1series

would you be interested in selling the passenger fender seperate if so do you have any pictures of the 67 passenger fender

would prefer to sell clip complete. Thanks if I change my mind I will let you know.

WILD WILLIE · 12-31-2010, 01:32 PM

Quote:

Originally Posted by projectjimmie68

I am in need of metal door panels. Do you have if so how much plus shipping to zip 32136? Thanks

Sorry guy no metal door panels. Thanks for asking.

WILD WILLIE · 01-01-2011, 05:24 PM

Ttt

crr26@cox.net · 01-02-2011, 11:44 PM

do u still have 68 fenders and how far are u frm houston

WILD WILLIE · 01-03-2011, 10:50 AM

Quote:

Originally Posted by crr26@cox.net

do u still have 68 fenders and how far are u frm houston

yes they are still avaliable but i am like 8 hours from houston i am about 45 min south of wichita falls

crr26@cox.net · 01-03-2011, 08:55 PM

how far from dallas or shreveport

WILD WILLIE · 01-04-2011, 03:53 PM

Quote:

Originally Posted by crr26@cox.net

how far from dallas or shreveport

I am 2.5 hours from dallas on hwy 114 west out of dallas

WILD WILLIE · 01-05-2011, 06:17 PM

ttt

WILD WILLIE · 01-06-2011, 02:26 PM

More pics

*ksjh1316* · 01-06-2011, 07:48 PM

Do you have the guts for either of the 67 or 68 steering wheel I have the wheel and cap but missing all the pieces on the inside of it

WILD WILLIE · 01-07-2011, 05:40 PM

Quote:

Originally Posted by ksjh1316

Do you have the guts for either of the 67 or 68 steering wheel I have the wheel and cap but missing all the pieces on the inside of it

For a non-tilt colum or tilt?

edouble · 01-07-2011, 08:52 PM

I'm interested in the 70 door set but I'd need them shipped to 21050. Please let me know if you change your mind on the shipping.

WILD WILLIE · 01-08-2011, 10:38 AM

Quote:

Originally Posted by edouble

I'm interested in the 70 door set but I'd need them shipped to 21050. Please let me know if you change your mind on the shipping.

I will check what freight will be and let you know.

12-30-2010, 10:53 AM	#1
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	67 swb bed,68 fenders,doors,frame 67 clip and more Heres a list of what i can remember 67 swb step side bed (needs floor) 400.00 reduced bed 350.00sold 68 chevy fenders in excellent shape no rust or dents 200.00 68-72 stepside fenders(no spare cut out) 150.00 set SOLD swb frame straight 350.00 SOLD 67 doors no speaker holes or rust 200.00 set reduced 175.00 70 doors with speaker holes and no rust 200.00 set reduced 175.00 67 clip complete has rust in core support and lower right fender and inner fender well but still repairable 200.00 sold 68 cab with title has rust in rockers i removed drivers side and drivers cab coner needs to be repaired 200.00 with title sold 5lug front end setup have 2 sets upper and lower a-arms and spindles,rotors and calipers 75.00 a set 1 set sold cowl panel with antenna hole 15.00 tilt van colums tight with wheels 125.00 each sold have some 70 emblems and other misc parts JUST ARRIVED 67 OR 68 HOOD 65.00 NICE PASS SIDE 68 DOOR EXCELLENT SHAPE 75.00 DRIVERS SIDE 68 FRONT FENDER NEW BUT HAS BEEN MOUNTED AND INNER FENDERWELL 100.00 AND SOME OTHER MISC PARTS cell # 940-733-8076 prefer not to ship live in county hard to get fright company to pickup Last edited by WILD WILLIE; 02-18-2011 at 10:44 AM. Reason: ENTER SOLD ITEMS AND NEW ITEMS

12-30-2010, 10:56 AM	#2
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more Here are the pics Attached Images

12-30-2010, 12:55 PM	#3
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more any pics of the rust on the front clip. I would like to see the extent of the rust please. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

12-30-2010, 01:38 PM	#4
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more not any pics at this time but the right fender will need the bottom cup under the battery replaced and the core support needs to be repaired on the pass side also its all the way thru and inner fender where it bolts on to the core supportis rusted also. and the drivers inner fender wellhas been cut where the colum goes past it. the clip is in good shape

12-30-2010, 04:21 PM	#6
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more bare frame

12-30-2010, 04:25 PM	#7
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more I am in need of metal door panels. Do you have if so how much plus shipping to zip 32136? Thanks

12-30-2010, 05:53 PM	#8
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more would you be interested in selling the passenger fender seperate if so do you have any pictures of the 67 passenger fender

12-30-2010, 06:03 PM	#9
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more I'm interested in the 67 doors if you change your mind about shipping them. I shipped a pair a couple years ago via UPS to Canada with no issues.

12-30-2010, 08:29 PM	#10
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more what about 67 drivers side fender. shape? price? thanx rich

12-30-2010, 11:40 PM	#11
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more I'll take the 68 fenders. __________________ 69 swb stepside, rebuild and upgrade in progress

01-01-2011, 05:24 PM	#15
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more Ttt

01-02-2011, 11:44 PM	#16
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more do u still have 68 fenders and how far are u frm houston

01-03-2011, 08:55 PM	#18
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more how far from dallas or shreveport

01-05-2011, 06:17 PM	#20
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more ttt

01-06-2011, 02:26 PM	#21
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more More pics Attached Images



Register or Log In To remove these advertisements.

01-06-2011, 07:48 PM	#22
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more Do you have the guts for either of the 67 or 68 steering wheel I have the wheel and cap but missing all the pieces on the inside of it

01-07-2011, 08:52 PM	#24
edouble Registered User Join Date: Dec 2010 Location: Baltimore, Md Posts: 5	Re: 67 swb bed,68 fenders,doors,frame 67 clip and more I'm interested in the 70 door set but I'd need them shipped to 21050. Please let me know if you change your mind on the shipping.

Register or Log In To remove these advertisements.