Restoring glove box door-help????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bestchevyfan · 12-18-2008, 03:57 PM

What kind of paint to use when restoring a 67-68 door that is black with the gray trim ? Thanks,buddy

myoldchevytruck · 12-18-2008, 04:25 PM

I'm gonna powdercoat mine black along with the ash tray. I'll do your glove box door for $20.00 and you pay shipping each way or I have an extra glove box door for $45.00 plus shipping

**too much stuff** · 12-18-2008, 06:36 PM

Check with special-K. I think he had something figured out that looked good.

67ChevyRedneck · 12-18-2008, 07:03 PM

I used a spray can spray in bedliner coating from wal-mart. I also used aluminum colored paint, let it completely dry (the aluminum paint took SEVERAL days to dry!), wiped it down to take the luster away, then cleared it. Not 100% original, but cheap and I like it.

hotrod 80 · 12-18-2008, 07:34 PM

I did mine similar to rednecks . Painted the inside with flat black , then taped the inide off and used aluminum paint on the outter ring . Came out pretty good . Should have wiped the finger prints off before the picture though .

myoldchevytruck · 12-18-2008, 10:57 PM

Quote:

Originally Posted by 67ChevyRedneck

I used a spray can spray in bedliner coating from wal-mart. I also used aluminum colored paint, let it completely dry (the aluminum paint took SEVERAL days to dry!), wiped it down to take the luster away, then cleared it. Not 100% original, but cheap and I like it.

Dash looks nice, especially with the white faced gauges.

bestchevyfan · 12-19-2008, 10:36 AM

Harry, what does it look like powdercoated ? Thanks,buddy

12-18-2008, 03:57 PM	#1
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Restoring glove box door-help????? What kind of paint to use when restoring a 67-68 door that is black with the gray trim ? Thanks,buddy

12-18-2008, 04:25 PM	#2
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Restoring glove box door-help????? I'm gonna powdercoat mine black along with the ash tray. I'll do your glove box door for $20.00 and you pay shipping each way or I have an extra glove box door for $45.00 plus shipping __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 12-18-2008 at 04:26 PM.

12-18-2008, 06:36 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: Restoring glove box door-help????? Check with special-K. I think he had something figured out that looked good. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-18-2008, 07:03 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Restoring glove box door-help????? I used a spray can spray in bedliner coating from wal-mart. I also used aluminum colored paint, let it completely dry (the aluminum paint took SEVERAL days to dry!), wiped it down to take the luster away, then cleared it. Not 100% original, but cheap and I like it. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-18-2008 at 07:04 PM.

12-18-2008, 07:34 PM	#5
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Restoring glove box door-help????? I did mine similar to rednecks . Painted the inside with flat black , then taped the inide off and used aluminum paint on the outter ring . Came out pretty good . Should have wiped the finger prints off before the picture though . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

12-19-2008, 10:36 AM	#7
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Restoring glove box door-help????? Harry, what does it look like powdercoated ? Thanks,buddy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.