How much for Vortec? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jared stewart · 07-15-2004, 02:21 PM

I need some help guys. I have somebody who's interested in buying just the engine from the truck I have for sale. I need to know about how much it's worth.

Engine : vortec 350
This engine was a factory return from a GMC conversion van. It spun a bearing at 7000 miles. It’s been tore down, crank replaced with a nodular eagle crank and taken to the local machine shop and had the rod reconditioned and the bottom end blueprinted and balanced.

Engine Contains:
• clevelite 77 bearings
• Felpro performance head gaskets
• Felpro oil pan gasket (one piece)
• Edelbrock vortec performer intake polished
• FlowKooler Waterpump
• Lokar dipstick

Everything is standard. The engine has about 10 miles on it getting timing etc, set.

gldevall · 07-15-2004, 02:43 PM

But it is still a used engine. I would say $800-900.

Tom · 07-15-2004, 06:44 PM

Its not used, its new. Id say $1000. I paid $900 for my factory return vortec 350. Luckly it didn't hurt anything, just low oil pressure for the first few weeks the stock vehicle had it. GM replaced the bearings and sold it to me for $900.

07-15-2004, 02:21 PM	#1
jared stewart Silverado Stew Join Date: Jan 2004 Location: Ewing, MO Posts: 184	How much for Vortec? I need some help guys. I have somebody who's interested in buying just the engine from the truck I have for sale. I need to know about how much it's worth. Engine : vortec 350 This engine was a factory return from a GMC conversion van. It spun a bearing at 7000 miles. It’s been tore down, crank replaced with a nodular eagle crank and taken to the local machine shop and had the rod reconditioned and the bottom end blueprinted and balanced. Engine Contains: • clevelite 77 bearings • Felpro performance head gaskets • Felpro oil pan gasket (one piece) • Edelbrock vortec performer intake polished • FlowKooler Waterpump • Lokar dipstick Everything is standard. The engine has about 10 miles on it getting timing etc, set. __________________ - 1997 3/4 Ton Ext. Cab LB 4x4 6.5L Diesel - 1979 3/4 Ton Longbed 4x4 "Farm Truck" - 1984 1/2 Ton w/ '99 Vortec 350/700R4 2x4 FOR SALE

07-15-2004, 02:43 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	But it is still a used engine. I would say $800-900. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

07-15-2004, 06:44 PM	#3
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	Its not used, its new. Id say $1000. I paid $900 for my factory return vortec 350. Luckly it didn't hurt anything, just low oil pressure for the first few weeks the stock vehicle had it. GM replaced the bearings and sold it to me for $900. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.