|
03-04-2013, 10:58 PM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Turbo 400 question
I have a 68 C10 with a turbo 400 transmission. I just installed the driveshaft and linkage. It doesnt have a dip stick yet and I also need to put fluid in. I started the truck to see if it would go into gear but it didnt do anything. I didnt want to leave it running or try for very long because of the no dipstick and fluid so I only tried twice. I'm new to this so any help would be awesome!!
|
|
|
|
03-04-2013, 11:06 PM
|
#2 |
|
Registered User
Join Date: Sep 2005
Location: Canton North carolina
Posts: 3,079
|
Re: Turbo 400 question
Don't do that! Put fluid in and hope you have not already ruined the trans. Fluid is what makes the bands clamp which makes it shift. You may need a new trans.
Posted via Mobile Device
__________________
67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle |
|
|
|
|
03-04-2013, 11:08 PM
|
#3 |
|
Registered User
Join Date: Dec 2003
Location: Yakima,WA.
Posts: 150
|
Re: Turbo 400 question
It wont do anything without fluid. you need dipstick and fluid before running it.
__________________
Mark 67 c20 custom camper 55 Olds 2dr hardtop 96 mustang 11 dodge nitro |
|
|
|
|
03-04-2013, 11:10 PM
|
#4 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Re: Turbo 400 question
Crap ok. I honestly did it for 3 seconds so hopefully it's still ok.
|
|
|
|
|
03-04-2013, 11:15 PM
|
#5 | |
|
Registered User
Join Date: Dec 2012
Location: Altoona Iowa
Posts: 481
|
Re: Turbo 400 question
Quote:
Good luck. |
|
|
|
|
|
03-04-2013, 11:18 PM
|
#6 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Re: Turbo 400 question
Got it. It does actually have fluid but its needs to be changed. I do need a dipstick however....
|
|
|
|
|
03-04-2013, 11:26 PM
|
#7 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Re: Turbo 400 question
Didnt mean to scare anybody but I want to correct myself. It does have fluid but its old. I meant to say it didnt have new fluid. It does not have a dipstick so I was curious would this make it not engage?
|
|
|
|
|
03-04-2013, 11:30 PM
|
#8 | |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: Turbo 400 question
Quote:
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
|
|
|
|
03-04-2013, 11:39 PM
|
#9 | |
|
Registered User
Join Date: Dec 2012
Location: Altoona Iowa
Posts: 481
|
Re: Turbo 400 question
Quote:
I would still drain out the fluid, and refill with fresh. Try it again, if not working then you should at least try to do a trans flush. |
|
|
|
|
|
03-04-2013, 11:43 PM
|
#10 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Re: Turbo 400 question
No leaks at all. I have a dipstick coming tomorrow. I will put that in and drain the fluid and put some new fluid in. Thanks!
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
