Squishin blazer time... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-20-2010, 11:25 PM

A moment of silence...
At least a fair amount of parts will live on. And trust me, there wasn't much left. I threw an old tbi engine in the back and it still went 2440 pounds.

71swb4x4 · 01-20-2010, 11:34 PM

You should really consider strapping things down before towing them on a trailer.

On a more serious note, nice trailer wheels!!

**too much stuff** · 01-21-2010, 12:43 AM

Quote:

Originally Posted by 71swb4x4

You should really consider strapping things down before towing them on a trailer.

On a more serious note, nice trailer wheels!!

HAHA. I went overboard on this one because the front and rear diff were cut free at this point. Better safe than sorry.
May as well have a set of rallys on the trailer...

**tnblazerk5** · 01-21-2010, 01:00 AM

yup nice trailer wheels

longhorn70gmc · 01-21-2010, 02:05 AM

How much did they pay per pound? Out here they pay a half a cent and take the vehicles back to the east coast for top dollar. Two years ago when it was a cent a pound I got $3.68 cents for a 3068 pound bed. Hope you made out.
R/

**too much stuff** · 01-21-2010, 10:33 AM

Right now it is $110/ton. I got $135 for the remains...

QKENUF4U · 01-21-2010, 10:48 AM

i still see good glass, marker lights, drive train, ..... ????? bummer it went to the crusher.....

**too much stuff** · 01-21-2010, 12:54 PM

Quote:

Originally Posted by QKENUF4U

i still see good glass, marker lights, drive train, ..... ????? bummer it went to the crusher.....

The only glass that was good was the 2 side glass in the roof. Marker lights were all broke, i kept the front and rear diffs. Not a bummer it left, i had it advertised on here for $175 and had no response. About what i figured crush price would be...

my67chevytruck · 01-21-2010, 12:59 PM

Eric, i was hoping you would of kept the difs..... , then read you last statement......you gotta do what you gotta do......

newagecustom · 01-21-2010, 02:28 PM

So you didnt want to pull the spring hangers either i suppose.

**too much stuff** · 01-21-2010, 04:17 PM

Quote:

Originally Posted by newagecustom

So you didnt want to pull the spring hangers either i suppose.

Sorry i didn't. You get to a point where it is done. I had enough rolling around underneath that one fighting rusty parts. Keep in mind, things don't come apart up here like they do down south... If i run across some, i will let you know.

01-20-2010, 11:25 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Squishin blazer time... A moment of silence... At least a fair amount of parts will live on. And trust me, there wasn't much left. I threw an old tbi engine in the back and it still went 2440 pounds. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2010, 11:34 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Squishin blazer time... You should really consider strapping things down before towing them on a trailer. On a more serious note, nice trailer wheels!! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-21-2010, 01:00 AM	#4
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Squishin blazer time... yup nice trailer wheels

01-21-2010, 02:05 AM	#5
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Squishin blazer time... How much did they pay per pound? Out here they pay a half a cent and take the vehicles back to the east coast for top dollar. Two years ago when it was a cent a pound I got $3.68 cents for a 3068 pound bed. Hope you made out. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-21-2010, 10:33 AM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Squishin blazer time... Right now it is $110/ton. I got $135 for the remains... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-21-2010, 10:48 AM	#7
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: Squishin blazer time... i still see good glass, marker lights, drive train, ..... ????? bummer it went to the crusher.....

01-21-2010, 12:59 PM	#9
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Squishin blazer time... Eric, i was hoping you would of kept the difs..... , then read you last statement......you gotta do what you gotta do...... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-21-2010, 02:28 PM	#10
newagecustom c10 Chop Artist Join Date: Feb 2007 Location: az Posts: 481	Re: Squishin blazer time... So you didnt want to pull the spring hangers either i suppose.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.