72 gmc c10 headers ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

po_bird · 12-29-2009, 11:14 PM

I am having trouble finding headers that will fit. I have bought 3 different pair. The motor mount on the pass side is in the way. Its like it comes up to high for the header to bolt up. What kind do you guys have? I have a sbc engine.

**special-K** · 12-30-2009, 08:42 AM

Are they a truck part#?This is 2wd,right?

po_bird · 12-30-2009, 12:22 PM

Yea, it is 2wd. The headers I tried where suppose to be made for my truck. I tried the flowtech brand and their afterburner type as well. It looks like my motor mount bracket comes up to high.

vectorit · 12-30-2009, 12:30 PM

Was your truck originally equipped with a V8? If not, someone could have used a motor mount that isn't right?

I've used Hooker Super comp headers in the past, and they were the best bet/fit for the money.

Street Smart · 12-30-2009, 01:49 PM

Quote:

Originally Posted by vectorit

Was your truck originally equipped with a V8? If not, someone could have used a motor mount that isn't right?

I've used Hooker Super comp headers in the past, and they were the best bet/fit for the money.

i have hookers super comps in both my trucks, fit perfect. good ground clearance too.
in one truck the motor is in the wrong set of holes and still fit.

crushermechanic · 12-30-2009, 01:59 PM

i am running hedmans on mine. i put as set of flow techs on anoter truck and the fit was horrible.

po_bird · 12-30-2009, 03:12 PM

Original v8. I think I will try a set of headmans next.

cdowns · 12-30-2009, 03:57 PM

the problem with hedmans especially on a lowered truck is they hang quite low under the frame

po_bird · 12-30-2009, 04:46 PM

Which ones give good ground clearance. I need to have that.

po_bird · 12-30-2009, 07:28 PM

Do you remember the part #. What year did is your trucks

Rooster's 67 · 12-30-2009, 08:39 PM

you can use chevelle,camaro, 3/4 length headers they donot drop below the frame at all

you are looking for some like these http://static.summitracing.com/globa...ed-68609_w.jpg
they fit the older body camaros

Street Smart · 12-30-2009, 09:01 PM

I`m sorry i COMP not super comp, nice ground clearance. http://www.summitracing.com/parts/HO...R/?image=large

po_bird · 01-02-2010, 10:33 AM

Quote:

Originally Posted by street smart

i`m sorry i comp not super comp, nice ground clearance. http://www.summitracing.com/parts/ho...r/?image=large

are these what you have on yours? I like them.

po_bird · 01-02-2010, 01:28 PM

I think im gonna go with the headmans. I like the ball and socket flange

Street Smart · 01-02-2010, 08:08 PM

Quote:

Originally Posted by po_bird

are these what you have on yours? I like them.

yes i have the comps, it uses a regular 3 bolt flange with a gasket

12-29-2009, 11:14 PM	#1
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	72 gmc c10 headers ? I am having trouble finding headers that will fit. I have bought 3 different pair. The motor mount on the pass side is in the way. Its like it comes up to high for the header to bolt up. What kind do you guys have? I have a sbc engine.

12-30-2009, 08:42 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 72 gmc c10 headers ? Are they a truck part#?This is 2wd,right? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-30-2009, 12:22 PM	#3
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	Re: 72 gmc c10 headers ? Yea, it is 2wd. The headers I tried where suppose to be made for my truck. I tried the flowtech brand and their afterburner type as well. It looks like my motor mount bracket comes up to high. __________________ 72 SIERRA LB 74 C10 SB 85 C10 SB 75 EL CAMINO SS

12-30-2009, 12:30 PM	#4
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 72 gmc c10 headers ? Was your truck originally equipped with a V8? If not, someone could have used a motor mount that isn't right? I've used Hooker Super comp headers in the past, and they were the best bet/fit for the money. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

12-30-2009, 01:59 PM	#6
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: 72 gmc c10 headers ? i am running hedmans on mine. i put as set of flow techs on anoter truck and the fit was horrible.

12-30-2009, 03:12 PM	#7
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	Re: 72 gmc c10 headers ? Original v8. I think I will try a set of headmans next. __________________ 72 SIERRA LB 74 C10 SB 85 C10 SB 75 EL CAMINO SS

12-30-2009, 03:57 PM	#8
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: 72 gmc c10 headers ? the problem with hedmans especially on a lowered truck is they hang quite low under the frame __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-30-2009, 04:46 PM	#9
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	Re: 72 gmc c10 headers ? Which ones give good ground clearance. I need to have that. __________________ 72 SIERRA LB 74 C10 SB 85 C10 SB 75 EL CAMINO SS

12-30-2009, 07:28 PM	#10
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	Re: 72 gmc c10 headers ? Do you remember the part #. What year did is your trucks __________________ 72 SIERRA LB 74 C10 SB 85 C10 SB 75 EL CAMINO SS

12-30-2009, 08:39 PM	#11
Rooster's 67 Registered User Join Date: Sep 2003 Location: DFW Posts: 765	Re: 72 gmc c10 headers ? you can use chevelle,camaro, 3/4 length headers they donot drop below the frame at all you are looking for some like these http://static.summitracing.com/globa...ed-68609_w.jpg they fit the older body camaros __________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? Last edited by Rooster's 67; 12-30-2009 at 08:43 PM.

12-30-2009, 09:01 PM	#12
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: 72 gmc c10 headers ? I`m sorry i COMP not super comp, nice ground clearance. http://www.summitracing.com/parts/HO...R/?image=large __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

01-02-2010, 01:28 PM	#14
po_bird Registered User Join Date: Oct 2005 Location: MUSKOGEE, OK Posts: 229	Re: 72 gmc c10 headers ? I think im gonna go with the headmans. I like the ball and socket flange __________________ 72 SIERRA LB 74 C10 SB 85 C10 SB 75 EL CAMINO SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.