needle removal/replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sactoC10 · 01-01-2004, 09:27 PM

OK, sitting here watching a 69-70 LWB in "Jeepers Creepers 2" operate as a getaway vehcle on TV... and taking apart my instrument cluster.

How do I get the needles off with destroying anything...then get them back into place correctly?

BUXMAN66 · 01-01-2004, 09:33 PM

didn't know you could take the needles off and replace....? i've just painted them on the guage,if i was trying to make them look better. dunno if this helps any.....

724x4a/cchevy · 01-01-2004, 09:39 PM

Take a fork and slide it up under neath the needle and pull straight up.

JimKshortstep4x4 · 01-01-2004, 10:29 PM

The speedometer needle hits a stop for zero, but the gas gauge needle does not have a stop. If you pull the gas gauge needle off, remember where it was so that when you put it back on it will read correctly.

Jim

sactoC10 · 01-02-2004, 12:46 AM

Thinking that I want to repaint the needles...and possibly put white faces in the cluster...so that's what I am thinking about while I have this all apart.

Longhorn Man · 01-02-2004, 02:25 AM

I painted my guages white, and then when they dried, I put some construction paper under the needles by cutting a slit in it, and then shot the needles orange.
Done it 3 times now with no problems at all.

724x4a/cchevy · 01-02-2004, 02:31 AM

durangedesign.com sells a vynal overlay kit for our trucks. its $20 i think. I bought a set and installed them myself.

724x4a/cchevy · 01-02-2004, 02:36 AM

1

724x4a/cchevy · 01-02-2004, 02:37 AM

2

Longhorn Man · 01-02-2004, 03:34 AM

Bummer you can't read the speedo numbers at night though huh? (Other than that...I do like the overlay deal)

01-01-2004, 09:27 PM	#1
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	needle removal/replacement OK, sitting here watching a 69-70 LWB in "Jeepers Creepers 2" operate as a getaway vehcle on TV... and taking apart my instrument cluster. How do I get the needles off with destroying anything...then get them back into place correctly?

01-01-2004, 09:33 PM	#2
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	didn't know you could take the needles off and replace....? i've just painted them on the guage,if i was trying to make them look better. dunno if this helps any..... __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

01-01-2004, 09:39 PM	#3
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Take a fork and slide it up under neath the needle and pull straight up. __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-02-2004, 12:46 AM	#5
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	thanks Thinking that I want to repaint the needles...and possibly put white faces in the cluster...so that's what I am thinking about while I have this all apart.

01-02-2004, 02:25 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I painted my guages white, and then when they dried, I put some construction paper under the needles by cutting a slit in it, and then shot the needles orange. Done it 3 times now with no problems at all. Attached Images

01-01-2004, 10:29 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The speedometer needle hits a stop for zero, but the gas gauge needle does not have a stop. If you pull the gas gauge needle off, remember where it was so that when you put it back on it will read correctly. Jim

01-02-2004, 02:31 AM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	durangedesign.com sells a vynal overlay kit for our trucks. its $20 i think. I bought a set and installed them myself. __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-02-2004, 02:36 AM	#8
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	1 1 Attached Images __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-02-2004, 02:37 AM	#9
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	2 2 Attached Images __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-02-2004, 03:34 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Bummer you can't read the speedo numbers at night though huh? (Other than that...I do like the overlay deal)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.