Thanks to Sharpie, I was able to get my hands on a short water pump power steering pump and bracket. I put on the back bracket to just put the pump in place to see how things line up.
The problem is I already had to put 2 washers for spacers behind each bolt of the crank pulley to get it to line up with the water pump pulley. Now looking at the power steering pump, I need to come out another 1/2 inch at least, not only that but the pulley of the PS pump is not even at the same angle as the other two pulleys....
Any thoughts?
04-26-2012, 11:06 PM
Threaded Mode