What is this and where does it go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Longhorn 69** · 03-11-2019, 09:16 PM

Can't remember where this goes or what it is for, but I think it goes on the engine somewhere. 69 C-20 Longhorn, 396, SM 465. I'm sure someone can
help me out
Thanks Greg

**Boog** · 03-11-2019, 10:19 PM

Plug wire separator.

**Longhorn 69** · 03-12-2019, 10:54 AM

Boog your right. Looking at my pictures I also found where it goes now.
Thanks Greg

**71CHEVYSHORTBED402** · 03-12-2019, 01:00 PM

Quote:

Originally Posted by Longhorn 69

Boog your right. Looking at my pictures I also found where it goes now.
Thanks Greg

Right on, where did you place it? I pulled one of my truck a quarter century ago. Best I can come up with is the 2nd lower bolt hole from the front on the RH valve cover.

**Longhorn 69** · 03-12-2019, 10:48 PM

I have a picture of it on the rear lower valve cover bolt on Drivers side. Not sure that is correct though, but that's where mine was.

**71CHEVYSHORTBED402** · 03-12-2019, 11:12 PM

Quote:

Originally Posted by Longhorn 69

I have a picture of it on the rear lower valve cover bolt on Drivers side. Not sure that is correct though, but that's where mine was.

My first instinct was that's exactly where it goes. But I can't make sense of it. Seems it would take two wires. By the looks of this placement, it appears just one wire, routed from behind the valve cover. I know the old wires were pretty thin, maybe it retains just one?

**Longhorn 69** · 03-13-2019, 11:16 AM

That's the location my pic shows. Yes I agree, pretty small openings for the wire. I think just the one wire also. I am going to try to find some small grommets to slip in the openings to help protect the wire but probably not enough room for them and the wire both.

03-11-2019, 09:16 PM	#1
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	What is this and where does it go? Can't remember where this goes or what it is for, but I think it goes on the engine somewhere. 69 C-20 Longhorn, 396, SM 465. I'm sure someone can help me out Thanks Greg Attached Images __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air

03-11-2019, 10:19 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,095	Re: What is this and where does it go? Plug wire separator. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-12-2019, 10:54 AM	#3
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	Re: What is this and where does it go? Boog your right. Looking at my pictures I also found where it goes now. Thanks Greg __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air

03-12-2019, 10:48 PM	#5
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	Re: What is this and where does it go? I have a picture of it on the rear lower valve cover bolt on Drivers side. Not sure that is correct though, but that's where mine was. __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air Last edited by Longhorn 69; 03-12-2019 at 10:51 PM. Reason: trying to add the picture

03-13-2019, 11:16 AM	#7
Longhorn 69 Junior Member Join Date: Oct 2017 Location: Oregon, Ill. Posts: 62	Re: What is this and where does it go? That's the location my pic shows. Yes I agree, pretty small openings for the wire. I think just the one wire also. I am going to try to find some small grommets to slip in the openings to help protect the wire but probably not enough room for them and the wire both. __________________ Greg 69 Longhorn 396, 4 Speed SM 465, PS, PB, No Air



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.