VA Big Block parts

[VA72C10]

Back after a long break to sell remaining parts. Updated as of 5/9/2020 to reflect what I have for sale now.

1972 396/402 engine (longblock minus intake) with 41,000 miles. Had stuck lifter so assume you'll need to rebuild. 500 or 700 with intake and valve covers/wire loom pieces
1972 Th400 transmission with 41,000 miles. Unknown condition. Includes torque converter.
PS Pump with all brackets and bolts/washers/nuts 220
Alternator brackets with all bolts/washers/nuts 120
BB pulleys 150 (A/C and smog parts gone)
Air cleaner with spark arrestor and factory wingnut 120
Original radiator (LEAKING) $40
BB Flywheel 40
BB factory valve covers (have dents) with Wire loom pieces 50
BB Factory correct date intake with choke and water neck 100
BB wiring harness still flexible and complete 100
Everything for 1000
These parts are also for sale locally and local pickup preferred to shipping.

Shipping is extra and will be calculated by part or group of parts purchased.

[67kid]

Originally Posted by VA72C10

PS Pump with all brackets and bolts/washers/nuts 250
Alternator brackets with all bolts/washers/nuts 160
BB pulleys 175
72 BB motor mounts with clamshells and all bolts 220
Air cleaner with spark arrestor and factory wingnut 150
4 core rad mounts upper and lower with rubber and hardware 80
BB fan shroud 100
Original radiator (LEAKING) $60
Heat riser (tube good- bottom shield is rusted) 30
BB factory valve covers with Wire loom pieces 80
BB Factory correct date intake with choke and water neck 140
Heat shield for cab 40
BB wiring harness still flexible and complete 100

These parts are also for sale locally and local pickup preferred to shipping.

I will take the tube and valve covers do you have pics
Posted via Mobile Device

[VA72C10]

Originally Posted by 67kid

I will take the tube and valve covers do you have pics
Posted via Mobile Device

Got it. I'll post pictures by tomorrow or Monday at latest.

[72chevynut]

Put me in line for the heat riser tube.

Thanks

[Eagle9502]

Is the radiator a Harrison? Any pics?

[VA72C10]

Originally Posted by 72chevynut

Put me in line for the heat riser tube.

Thanks

Got it

Originally Posted by Eagle9502

Is the radiator a Harrison? Any pics?

Yes,

[67kid]

I will take the tube and shield any pics of valve covers and is the smog setup for sale?
Posted via Mobile Device

[72chevynut]

I will take the fan shroud pending pics.

[VA72C10]

Originally Posted by 67kid

I will take the tube and shield any pics of valve covers and is the smog setup for sale?
Posted via Mobile Device

Shield as in heat shield? Just confirming.

I'll get a picture of the valve covers off later.

[67kid]

Originally Posted by VA72C10

Shield as in heat shield? Just confirming.

I'll get a picture of the valve covers off later.

Does the rusted shield go with tube? Is the smog setup for sale? and also interested in pulleys is the water pump 3 groove
Posted via Mobile Device

[VA72C10]

Originally Posted by 72chevynut

I will take the fan shroud pending pics.

Have all clips and hardware. One blemish shown on closeup.

[VA72C10]

Originally Posted by 67kid

Does the rusted shield go with tube? Is the smog setup for sale? and also interested in pulleys is the water pump 3 groove
Posted via Mobile Device

Yes, there's only a little over half left but yes, it's included. Was thinking you meant the exhaust heat shield.

Yes, pulleys are for AC and smog so three. Smog setup is sold.

[72chevynut]

I will take it, please PM payment info. Thanks

[VA72C10]

Originally Posted by 72chevynut

I will take it, please PM payment info. Thanks

Okay, let me get a box for it and figure up a cost for shipping.
Posted via Mobile Device

[72chevynut]

Originally Posted by VA72C10

Okay, let me get a box for it and figure up a cost for shipping.
Posted via Mobile Device

Sounds good, zip code is 40353. Thanks

[VA72C10]

Originally Posted by 67kid

I will take the tube and shield any pics of valve covers and is the smog setup for sale?
Posted via Mobile Device

Pretty sure I have the other wire separator still attached to the plug wires.

[67kid]

Hard to tell from pics any dents?
Posted via Mobile Device

[VA72C10]

Originally Posted by 67kid

Hard to tell from pics any dents?
Posted via Mobile Device

I don't think there are any dents. I'll check tomorrow.

[67kid]

will take the tube how do you take paypal?

[missionstreettattoo]

do you still have the alternator bracket and is it for the drivers side?

[VA72C10]

Originally Posted by 67kid

will take the tube how do you take paypal?

Yes, I take PayPal. Will try to fit in a flat rate box to save on shipping. Can you give me your zip so I can confirm and get you a total? Thanks.

[VA72C10]

Originally Posted by missionstreettattoo

do you still have the alternator bracket and is it for the drivers side?

Yes, and yes. It's the correct factory side brackets. It has several brackets and all the hardware.

[67kid]

zip is 85203 still interested in valve covers if dent free shipping on those?

[missionstreettattoo]

Originally Posted by VA72C10

Yes, and yes. It's the correct factory side brackets. It has several brackets and all the hardware.

i do not know what the correct side is, only that my truck was a straight 6 with a fresh installed BBC and the alternator lead is only long enough to reach the drivers side. which hoes for mounting does this use? i am very interested
, just want to make sure it will work for the application I need it for. Thank you!

[67kid]

Still for sale?
Posted via Mobile Device