CO Tilt column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 02-09-2020, 02:08 PM

SOLD

$425 local, $475 shipped.

Please respond in thread only per board rules, first "I'll take it" gets it.

Selling a painted and converted motorhome tilt column. From a mid 80s GM chassis

It has the straight shifter arm like a truck tilt

Also has the metal gear indicator

I moved the NSS down so it's a bolt-in for your 67-72; I used my multi-meter to adjust it, you may need to fine tune it after install.

Turn signal and tilt levers are new from GMC Pauls

Turn signal switch is new

Includes the cancel cam

The gray illumination wire is full length with the green end

Includes a long pigtail for the Neutral Safety/Reverse switch

Tilt mechanism is tight and smooth.

The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight.

Tilt pivots were cleaned and lubed when removed to tighten the bolts.

The bottom bearing was cleaned and greased

The upper bearings were cleaned and greased

The shift indicator bulb was replaced and tested OK, it has the green shade on it.

Shifter lever end (inside column) is good, pivot is good

Shift arm has nice chrome, it shines up well.

The finish on it is base/clear coat gloss black.

The shift arm is metallic silver and includes the rubber bushing and metal sleeve

New firewall and dash gaskets from GMC Pauls

I will include a new GMC Paul's gear indicator

Also can swap out the indicator lens for an OD version at the same price

You will need to add your metal firewall plate.

**clay68c10** · 02-09-2020, 02:12 PM

More pics

**clay68c10** · 02-09-2020, 02:15 PM

Last one

**SoCoC10** · 02-09-2020, 02:41 PM

I’m happy w/my tilt Clay restored. This shouldn’t last long. A great buy!

**clay68c10** · 02-09-2020, 02:43 PM

Thanks Troy
Are you sure you don't need a pretty one??

robpp · 02-10-2020, 03:10 PM

im looking for a tilt floor shift for my 70 C10, local to you.

Thanks,
Rob

**4x41971SWB** · 02-10-2020, 03:26 PM

I'll take it

**clay68c10** · 02-10-2020, 03:57 PM

Sold to 4x41971swb
PM sent

**4x41971SWB** · 02-10-2020, 04:38 PM

Quote:

Originally Posted by clay68c10

Sold to 4x41971swb
PM sent

Payment sent.
3 speed indicator
Thanks

**4x41971SWB** · 02-19-2020, 11:45 AM

Recieved this the other day and opened it up last night.
All I can say is WOW!!
It looks amazing and thank you for the more than fair price!

**clay68c10** · 02-20-2020, 04:51 PM

My pleasure. I can’t take all the credit, my buddy Dave does great paint work.

02-09-2020, 02:08 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Tilt column SOLD $425 local, $475 shipped. Please respond in thread only per board rules, first "I'll take it" gets it. Selling a painted and converted motorhome tilt column. From a mid 80s GM chassis It has the straight shifter arm like a truck tilt Also has the metal gear indicator I moved the NSS down so it's a bolt-in for your 67-72; I used my multi-meter to adjust it, you may need to fine tune it after install. Turn signal and tilt levers are new from GMC Pauls Turn signal switch is new Includes the cancel cam The gray illumination wire is full length with the green end Includes a long pigtail for the Neutral Safety/Reverse switch Tilt mechanism is tight and smooth. The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight. Tilt pivots were cleaned and lubed when removed to tighten the bolts. The bottom bearing was cleaned and greased The upper bearings were cleaned and greased The shift indicator bulb was replaced and tested OK, it has the green shade on it. Shifter lever end (inside column) is good, pivot is good Shift arm has nice chrome, it shines up well. The finish on it is base/clear coat gloss black. The shift arm is metallic silver and includes the rubber bushing and metal sleeve New firewall and dash gaskets from GMC Pauls I will include a new GMC Paul's gear indicator Also can swap out the indicator lens for an OD version at the same price You will need to add your metal firewall plate. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 02-10-2020 at 04:00 PM. Reason: Item sold

02-09-2020, 02:12 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: Tilt column More pics Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

02-09-2020, 02:15 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: Tilt column Last one Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

02-09-2020, 02:41 PM	#4
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,311	Re: Tilt column I’m happy w/my tilt Clay restored. This shouldn’t last long. A great buy! __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

02-09-2020, 02:43 PM	#5
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: Tilt column Thanks Troy Are you sure you don't need a pretty one?? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

02-10-2020, 03:10 PM	#6
robpp Registered User Join Date: Apr 2016 Location: Denver, CO Posts: 19	Re: Tilt column im looking for a tilt floor shift for my 70 C10, local to you. Thanks, Rob

02-10-2020, 03:26 PM	#7
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 573	Re: Tilt column I'll take it

02-10-2020, 03:57 PM	#8
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: Tilt column Sold to 4x41971swb PM sent __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

02-19-2020, 11:45 AM	#10
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 573	Re: Tilt column Recieved this the other day and opened it up last night. All I can say is WOW!! It looks amazing and thank you for the more than fair price!

02-20-2020, 04:51 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: Tilt column My pleasure. I can’t take all the credit, my buddy Dave does great paint work. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.