TX Parting out 67 SWB Roller

[Tmwoodall]

I have been getting lots of interest in parts and pieces off of the truck. So I am listing it for sale by part here with more realistic prices.

Doors $40/piece $75 pair - No Hardware other than the hinges.

Fenders $65 Driver (It is in pretty solid shape) $45 Passenger $100 Set
Hood $80 Dent in the front nose/ridgeline and on one corner.
Cowl $15 Sloppily welded to shave the antenna. Could be cleaned up and run for a no antenna setup.

Whole front clip $160

Cab $150 If it gets to cutting it up, $30 per panel I'll let you cut your own.
Frame 250 - Complete with hardware wheels etc
Wheels/Tires (the back are totally shot, the front actually hold air) $75
Gas Tank - $20 bucks you pull it $40 I pull it.
Drive shaft $20
Transmission - $40 (3 Speed in the floor)
Rear Axle $40
Engine block and anything else mechanical that is attached to it you want to pull - $50

You see something else you want, name a price and I'll like give it to you. My wife wants this thing out of the yard, and I want the space back in case I find another truck worth picking over

OBO on EVERYTHING. Take the whole thing for 400 OBO. I also have a set of 20's for a five lug and a never mounted rear roll pan.

Full image set here: http://gallery.me.com/tmwoodall#100081

[Tmwoodall]

A few teaser pictures:

If you want a shot that isn't shown, say the word and I'll upload to the gallery above.

[mahanian]

I'm looking for painted steel grille hoops if you decide to piece out the front clip

[BIG ORANGE]

Would you happen to have the little vent handles for the kick panel in the floor? 67 correct?
29720

[67-1sttimer]

have a 67 correct glovebox black silver trim? Thanks Chris.

[Tmwoodall]

Originally Posted by mahanian

I'm looking for painted steel grille hoops if you decide to piece out the front clip

I have a set one is bent slightly and one has a little but of rust through. I'll take pics tomorrow. $15? I wad keeping them in case I went rat rod because I thought the rust through looked perfect for a rrod.
Posted via Mobile Device

[Tmwoodall]

Originally Posted by BIG ORANGE

Would you happen to have the little vent handles for the kick panel in the floor? 67 correct?
29720

Those weren't in the truck when I bought it.
Posted via Mobile Device

[Tmwoodall]

Originally Posted by 67-1sttimer

have a 67 correct glovebox black silver trim? Thanks Chris.

Don't think so as I have no clue what you are talking about.
Posted via Mobile Device

[67-1sttimer]

how about a 67 year glove box door, you have one? thanks

[Tmwoodall]

Originally Posted by 67-1sttimer

how about a 67 year glove box door, you have one? thanks

I believe so. how do I confirm that it is a 67 and not some other year thrown into the truck at somepoint?
Posted via Mobile Device

[67-1sttimer]

maybe a couple pictures of it and i can see if what im looking for. From what i have seen for 67 the glove box have a black dull look on the face kinda like the dash bezel. I cant be certain either but something like that. Thanks Chris.

[67chevy1series]

Originally Posted by Tmwoodall

I believe so. how do I confirm that it is a 67 and not some other year thrown into the truck at somepoint?
Posted via Mobile Device

when you look where the spid labale goes it will be recessed a little and 68 72 will be flat once it rises. and 67 has black with a silver back and outlining to match the instrument cluster

[sharpie1972]

Originally Posted by 67chevy1series

when you look where the spid labale goes it will be recessed a little and 68 72 will be flat once it rises. and 67 has black with a silver back and outlining to match the instrument cluster

5,764! You are out of control! Sharpie

[Junkpyl]

I interested in the doors, what kind of shape are they in? PM me. Thanks

[mahanian]

Originally Posted by Tmwoodall

I have a set one is bent slightly and one has a little but of rust through. I'll take pics tomorrow. $15? I wad keeping them in case I went rat rod because I thought the rust through looked perfect for a rrod.
Posted via Mobile Device

Pictures would be great

[burb71]

I need the bracket tacked on the rear axle that holds the rear brake hose.
Can you help a brother out?

[rich67]

is there or has there been a rust issue with driverside fender? thought i got a shipping price from you on it. was that in a different thread? sorry so long getting back. thanx rich

[67-1sttimer]

I noticed in your first post the link to more pictures. Looks like the glovebox door is kind im looking for. What do you want for it? Thanks, Chris.

[Tmwoodall]

Originally Posted by 67-1sttimer

I noticed in your first post the link to more pictures. Looks like the glovebox door is kind im looking for. What do you want for it? Thanks, Chris.

20
Posted via Mobile Device

[67-1sttimer]

Can you do $15 for it?

[jrstallion51]

Still have the drivers door? What kind of shape is it in? Would you be willing to ship it?

[Tmwoodall]

Originally Posted by jrstallion51

Still have the drivers door? What kind of shape is it in? Would you be willing to ship it?

I would like to avoid the hassle of shipping the doors, and fenders at this point.

[Tmwoodall]

Originally Posted by burb71

I need the bracket tacked on the rear axle that holds the rear brake hose.
Can you help a brother out?

I think I can make that happen. I'll check on it today. $5 shipped.

[burb71]

Originally Posted by Tmwoodall

I think I can make that happen. I'll check on it today. $5 shipped.

Thanks Tmwoodall, If you can get it off with no damage I'll give you $10 for it.

[67-1sttimer]

Thanks, my zip is 75150. Take paypal? Chris (i messed up my PM reply i think you may not have got it.)