|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-01-2011, 12:36 AM
|
#1 |
|
Registered User
Join Date: Feb 2011
Location: Boise, Idaho
Posts: 610
|
78 Chevy Van steering column
I am putting a van tilt column into my 57 chevy truck. Does anyone have pictures of the dis-assembly process? I cant seem to get the turn signal switch out and feel like I am going to break it. Any help would be great....
|
|
|
|
03-01-2011, 01:11 AM
|
#2 |
|
Registered User
Join Date: Sep 2008
Location: Creston, BC Canada
Posts: 369
|
Re: 78 Chevy Van steering column
Remove the tilt lever, the screw holding the turn signal lever and it as well, then the hazzard knob. The tin shroud should be worked off at this time (try to avoid bending it, I used a strap wrench (rubber) and just spin it, a little lubricant and it should pop off). Remove the 3 large phillips screws and work the connector out past the lower cone and finally off. It's a pain and real tight.
Good luck! Ted.
__________________
'51 Chevy Build - In the design stages Aut viam inveniam aut faciam - I will either find a way or make one. If you don't have time to do it right the first time, when will you... My new build - https://67-72chevytrucks.com/vboard/...70#post8958970 |
|
|
|
|
03-01-2011, 01:10 PM
|
#3 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: 78 Chevy Van steering column
When I had to get into my 82 eldo column to remove the lock cylinder I googled and found a couple of sites with detailed disassembly and assembly instruction of GM tilt columns. The sequence is pretty specific and the one plate can be tricky if you don't know how to get it off. I just printed what I needed and do not have the link but remember it popped right up when I searched.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
03-01-2011, 07:06 PM
|
#4 |
|
Registered User
Join Date: Feb 2011
Location: Boise, Idaho
Posts: 610
|
Re: 78 Chevy Van steering column
Thadious and OrrieG, thanks i will try that out, i have found several sites on the model with the key in the column but very little on mine without. I will post what i find.
|
|
|
|
|
03-03-2011, 08:30 PM
|
#5 |
|
A320 Pilot/USAF Retired
Join Date: Mar 2009
Location: Charleston, SC
Posts: 2,622
|
Re: 78 Chevy Van steering column
These should help!
__________________
JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57 |
|
|
|
|
03-04-2011, 10:41 AM
|
#6 |
|
Registered User
Join Date: Feb 2011
Location: Boise, Idaho
Posts: 610
|
Re: 78 Chevy Van steering column
That's it, i just did not hit it with a hammer yet...
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
