The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-18-2019, 07:11 PM   #1
bigtexasrob
Registered User
 
bigtexasrob's Avatar
 
Join Date: Nov 2018
Location: Albuquerque, NM
Posts: 17
14-bolt Parts Compatibility

All right, long story short, I threw away the axle I needed, kept the axle with the diff I needed, and bought an axle I thought I needed.

Truck in question is a ‘74 C30 Dually. The axle under it currently is a SRW 14 bolt with an open 3.42 out of a ‘93 C2500. The axle I just picked up (without doing any measuring like an idiot) is a dually, open 4.09 that appears to be from a cab and chassis (meaning it’s the stubby 63.5” WMSW instead of the 72” dually.)

My question is this: how much of these two axles can I hodgepodge together and how close will it get me to the 72” dually with 3.42 final drive?
__________________
1974 C30 Dually Longbed
Diesel swap- Not finished
Airbags- Not finished
Rust- Extensive and ongoing
Offensive stickers- Many
bigtexasrob is offline   Reply With Quote
Old 04-18-2019, 10:05 PM   #2
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 14-bolt Parts Compatibility

you need the 72" wms to wms drw wide axle housing as the tubes and shafts are wider .

if you cant find one and need to be close g-vans up to 1995 i know can be had with a 70" wms to wms then some swaping work with parts and welding axle backing plate flanges further in for the brakes to work on them for drw hubs and brakes . but you will be 1" each side to narrow compared to the correct wide drw axle .

also check motor homes they get a wide axle under them . i have one thats a dana 70 and around 74" wide .

as to the guts swapping thats super easy to do on the 14ff axles . so look for the housing width you need and swap in your 3.42 guts.
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 04-18-2019, 10:19 PM   #3
bigtexasrob
Registered User
 
bigtexasrob's Avatar
 
Join Date: Nov 2018
Location: Albuquerque, NM
Posts: 17
Re: 14-bolt Parts Compatibility

So basically this one’s worthless �� sweet.
__________________
1974 C30 Dually Longbed
Diesel swap- Not finished
Airbags- Not finished
Rust- Extensive and ongoing
Offensive stickers- Many
bigtexasrob is offline   Reply With Quote
Old 04-19-2019, 01:49 AM   #4
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,592
Re: 14-bolt Parts Compatibility

The majority of the 72'' dually axles were Dana 70HDs
kwmech is offline   Reply With Quote
Old 04-19-2019, 09:42 AM   #5
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 14-bolt Parts Compatibility

Srw and c&c narrow are the same housing just hubs and brakes are different . The wide drw axle is its own animal . You can find 14ff units but most were Dana 70 hd rear .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 04-19-2019, 04:25 PM   #6
bigtexasrob
Registered User
 
bigtexasrob's Avatar
 
Join Date: Nov 2018
Location: Albuquerque, NM
Posts: 17
Re: 14-bolt Parts Compatibility

Quote:
Originally Posted by sweetk30 View Post
Srw and c&c narrow are the same housing just hubs and brakes are different . The wide drw axle is its own animal . You can find 14ff units but most were Dana 70 hd rear .
By measure the WMS on the C&C is shorter than my single and shorter than the previous dually 14ff.
__________________
1974 C30 Dually Longbed
Diesel swap- Not finished
Airbags- Not finished
Rust- Extensive and ongoing
Offensive stickers- Many
bigtexasrob is offline   Reply With Quote
Old 04-20-2019, 08:29 AM   #7
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 14-bolt Parts Compatibility

Cause the hubs suck in the wms but the shafts and bare housing are the same like I said .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 04-20-2019, 11:05 AM   #8
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 14-bolt Parts Compatibility

here is the bible of 14ff stuff http://www.pirate4x4.com/tech/billav...ble/index.html
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Reply

Bookmarks

Tags
14 bolt, axle, compatibility, parts, swap


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com