03-04-2018, 09:46 AM | #1 |
Registered User
Join Date: Jun 2017
Location: port st lucie, fl
Posts: 28
|
dash lights
I've been trouble shooting my dash lights and I have been successful in getting the right side to light up. I put a new printed circuit on but there is a bulb on the left side that has a tab on it and I don't see any wire that would attach to it like the one with tab on the right side. Could that be my problem? What wire attaches to it if any. Also my temp gauge isn't working. Thanks
|
03-04-2018, 10:33 AM | #2 |
Custom Sport W/T
Join Date: Nov 2010
Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem
Posts: 898
|
Re: dash lights
That bulb socket is missing the fiber optic that lights the gearshift selector on a non-tilt column. This is not a wire but a small fiber optic cable that should have no effect on your dash lights not working.
|
03-04-2018, 10:55 AM | #3 |
Registered User
Join Date: Jun 2017
Location: port st lucie, fl
Posts: 28
|
Re: dash lights
|
03-04-2018, 08:29 PM | #4 |
Registered User
Join Date: Jun 2017
Location: port st lucie, fl
Posts: 28
|
Re: dash lights
I cleaned all the bulb sockets check all the bulbs and success I have lights which I haven't had in 15 years
|
Bookmarks |
|
|