NC Parting a complete 1971 Blazer 4x4 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffg1010 · 01-10-2012, 11:50 PM

Quote:

Originally Posted by 72blazer_mud_bogger

do you still have the inner door handles and if so how much shipped to 22180

Yep, they were there. I will have to look to make sure they made it in the box of stuff I brought home. I will get a photo and post it. You are close to me. I'd say $13 shipped?

NorCalTank · 01-11-2012, 12:08 AM

are the seat belts still around? do they extend and retract smoothly? Thanks

jeffg1010 · 01-11-2012, 12:14 PM

Quote:

Originally Posted by NorCalTank

are the seat belts still around? do they extend and retract smoothly? Thanks

Yep, still got them. I will check their operation and let you know.

jeffg1010 · 01-11-2012, 01:06 PM

Quote:

Originally Posted by NorCalTank

are the seat belts still around? do they extend and retract smoothly? Thanks

Just tested the retractors. They work just fine. As you can see in the photos, the belts are dirty but functional. I would expect them to clean up good.

NorCalTank · 01-11-2012, 09:51 PM

Quote:

Originally Posted by jeffg1010

Just tested the retractors. They work just fine. As you can see in the photos, the belts are dirty but functional. I would expect them to clean up good.

Sounds good, can you PM me a price shipped to 96007. Thanks

blazin71K5 · 01-11-2012, 11:34 AM

Jeff if NorCalTank wants the seat belts feel free to make him a deal, but I am still after the seat brackets, possibly seat combo pending shipping info.
Thanks,
Matt

47thriftmaster · 01-11-2012, 08:20 PM

Jeff,
Did you end up pulling the transfer case out of the blazer or are you trying to keep all that together? What shape is it in? Thanks

jeffg1010 · 01-11-2012, 08:27 PM

Quote:

Originally Posted by 47thriftmaster

Jeff,
Did you end up pulling the transfer case out of the blazer or are you trying to keep all that together? What shape is it in? Thanks

The transfer case is still there. I will sell it. It was a running and drivable truck but I didn't test the 4wd.

47thriftmaster · 01-11-2012, 08:40 PM

I might have to look into that, my rear yoke is bad where the u-joint mounts.

Quote:

Originally Posted by jeffg1010

The transfer case is still there. I will sell it. It was a running and drivable truck but I didn't test the 4wd.

72blazer_mud_bogger · 01-11-2012, 08:26 PM

Ill take the inner door handles pending pics

72blazer_mud_bogger · 01-11-2012, 11:13 PM

just thought about something, would you be willing to part with the tcase shifter nob also. Dont worry about pics of the inner door handles as long as they are not broken then I will take them. So if you part with the shifter knob just let me know the total and I will send some money your way

jeffg1010 · 01-12-2012, 12:06 AM

Quote:

Originally Posted by NorCalTank

Sounds good, can you PM me a price shipped to 96007. Thanks

PM sent

Quote:

Originally Posted by 72blazer_mud_bogger

just thought about something, would you be willing to part with the tcase shifter nob also. Dont worry about pics of the inner door handles as long as they are not broken then I will take them. So if you part with the shifter knob just let me know the total and I will send some money your way

I'd do $45 for all of it (knob and handles) shipped. Let me know and I will PM you payment info. I know they aren't broken, because I was using the doors prior to taking the off. But they may be at my dad's still. I didn't see them in the box of stuff I brought home on Monday. I will try to dig them out and get a photo regardless.

72blazer_mud_bogger · 01-12-2012, 06:36 PM

thats a bit more than I wanted to spend on the knob but I will take the inner door handles. please try to send the pins that hold the handle on for both the handles. PM me your info

jeffg1010 · 01-12-2012, 11:11 PM

Quote:

Originally Posted by 72blazer_mud_bogger

thats a bit more than I wanted to spend on the knob but I will take the inner door handles. please try to send the pins that hold the handle on for both the handles. PM me your info

PM sent

jeffg1010 · 01-13-2012, 11:03 AM

Got hump?
This thing is in really good shape.

highrpm · 01-13-2012, 12:19 PM

Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape.

Thanks

jeffg1010 · 01-13-2012, 12:37 PM

Quote:

Originally Posted by highrpm

Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape.

Thanks

He didn't ask about the straps. I'll have to ask him. If not, you've got first dibs. I'll get pics once we get them off.

jeffg1010 · 01-21-2012, 09:34 PM

Quote:

Originally Posted by tanman722001

Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony

Do you want these? Did you get my # in the PM?

Quote:

Originally Posted by 47thriftmaster

Jeff,
Sounds good

What is your status on the tank and the bumpers? Are you waiting on the transfer case before you come to get it?

Quote:

Originally Posted by highrpm

Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape.

Thanks

Are you still wanting these straps? I think they could be shipped relatively easy if you cant get over this way.

jeffg1010 · 01-22-2012, 10:44 PM

Quote:

Originally Posted by highrpm

Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape.

Thanks

Good to meet you today. Thanks!

**BIGJAKE97** · 01-14-2012, 04:01 AM

the updated parts list doesn't say the rear bumper brackets are sold, if you still have them i'm interested. is the price for all four? do you have the bumper bracket shields? how much shipped to 94538? thanks, jake

jeffg1010 · 01-14-2012, 10:14 AM

Quote:

Originally Posted by BIGJAKE97

the updated parts list doesn't say the rear bumper brackets are sold, if you still have them i'm interested. is the price for all four? do you have the bumper bracket shields? how much shipped to 94538? thanks, jake

Well, it was $25 for the front and $25 for the rear, how about $50 including shipping? Let me know and I'll PM you PAYPAL info.

jaros44sr · 01-14-2012, 11:53 AM

Any word if the one good bucket seat sold, also need reinforcement plates on doors

**DeadheadNM** · 01-14-2012, 12:00 PM

Any chance the under dash lights are available with intact wiring? Pete

jeffg1010 · 01-14-2012, 12:36 PM

Quote:

Originally Posted by jaros44sr

Any word if the one good bucket seat sold, also need reinforcement plates on doors

I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

Quote:

Originally Posted by DeadheadNM

Any chance the under dash lights are available with intact wiring? Pete

I've never even noticed these lights. Where are they located? I did see the light that goes in the heater, but I didn't pay attention to any others.

jaros44sr · 01-14-2012, 01:00 PM

[QUOTE=jeffg1010;5122445]I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal

How about the reinforcement plates on the back of the doors

01-11-2012, 12:08 AM	#2
NorCalTank Registered User Join Date: Aug 2007 Location: South GA Posts: 72	Re: Parting a complete 1971 Blazer 4x4 are the seat belts still around? do they extend and retract smoothly? Thanks

01-11-2012, 11:34 AM	#6
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: Parting a complete 1971 Blazer 4x4 Jeff if NorCalTank wants the seat belts feel free to make him a deal, but I am still after the seat brackets, possibly seat combo pending shipping info. Thanks, Matt __________________ 71 2wd k5 67 Nova

01-11-2012, 08:20 PM	#7
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Parting a complete 1971 Blazer 4x4 Jeff, Did you end up pulling the transfer case out of the blazer or are you trying to keep all that together? What shape is it in? Thanks

01-11-2012, 08:26 PM	#10
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Parting a complete 1971 Blazer 4x4 Ill take the inner door handles pending pics

01-11-2012, 11:13 PM	#11
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Parting a complete 1971 Blazer 4x4 just thought about something, would you be willing to part with the tcase shifter nob also. Dont worry about pics of the inner door handles as long as they are not broken then I will take them. So if you part with the shifter knob just let me know the total and I will send some money your way

01-12-2012, 06:36 PM	#13
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Parting a complete 1971 Blazer 4x4 thats a bit more than I wanted to spend on the knob but I will take the inner door handles. please try to send the pins that hold the handle on for both the handles. PM me your info

01-13-2012, 11:03 AM	#15
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Parting a complete 1971 Blazer 4x4 Got hump? This thing is in really good shape. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

01-13-2012, 12:19 PM	#16
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: Parting a complete 1971 Blazer 4x4 Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape. Thanks

01-14-2012, 04:01 AM	#20
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 264	Re: Parting a complete 1971 Blazer 4x4 the updated parts list doesn't say the rear bumper brackets are sold, if you still have them i'm interested. is the price for all four? do you have the bumper bracket shields? how much shipped to 94538? thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

01-14-2012, 11:53 AM	#22
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,428	Re: Parting a complete 1971 Blazer 4x4 Any word if the one good bucket seat sold, also need reinforcement plates on doors __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-14-2012, 12:00 PM	#23
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,306	Re: Parting a complete 1971 Blazer 4x4 Any chance the under dash lights are available with intact wiring? Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-14-2012, 01:00 PM	#25
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,428	Re: Parting a complete 1971 Blazer 4x4 [QUOTE=jeffg1010;5122445]I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley. How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal How about the reinforcement plates on the back of the doors __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.