Wichita Swap Meet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fred T · 02-05-2003, 02:47 AM

How many of y'all will be there? This Friday & Sat. http://www.wichitaas.com/events/swapmeet.htm
I'll be there Friday afternoon. E-mail me fradt@cox.net if you want to try to get together. Me and Zurbo live about 10 minutes from the coliseum.

**Yukon Jack** · 02-05-2003, 10:19 AM

I'm probably going to try to go out around lunch on Friday - what time do you think you will be there?

Fred T · 02-05-2003, 11:02 AM

I should be there right from after lunch until about 5.

Zurbo · 02-05-2003, 04:36 PM

Not sure if I can get away Friday but I am planning on Saturday.

Stroker · 02-05-2003, 05:42 PM

I plan to be there Fri morning when the doors open. Anyone from the board planning to sell parts at the meet?

**Yukon Jack** · 02-05-2003, 05:47 PM

Greg (gregs_place) is supposed to have a spot, I e-mailed him this morning to see if he knows where he will be.

**71blksuper4x4** · 02-05-2003, 05:52 PM

My dad and I will be headin down there on Friday. Don't know for sure what time we will be gettin down there..... it is like 2-3 hr drive. Looking for a good passenger rectangular chrome 1971-72 outside mirror.... not looking to spending the $35 for a new one. Maybe some new vinyl blue seat covers too. If anyone of the vendors have some.

70cst10_05 · 02-05-2003, 06:16 PM

does anybody think that sat. will be a good day to go, because i went to the lawrence one and the second day there weren't a lot of ppl there, so i guess what im askin is do ya think there will be some good buys???
kevin

**Yukon Jack** · 02-05-2003, 06:27 PM

The last time I went to this show was on a Saturday, the second day, and there appeared to be a good turnout to me.

Fred T · 02-05-2003, 06:29 PM

I've found that both days are good. The first year I went I got there at 8am Friday, there were a lot of people not set up yet. Temp was in the teens with a north wind and snow. And the overhead doors were open. Now I don't go until after lunch. I have also gone on Saturday, it is usually busy all day, and you can usually get the price down some, too. Two guys set up there that I know, one sells chevelle parts, the other is Jeff at Bowtie bits. Jeff's against the west wall in the north end of the main building. Another guy, that I won't claim, sells mopar parts. Doesn't everyone have a friend with serious character flaws?

Kid · 02-05-2003, 10:10 PM

I will be there both days, selling some no longer needed parts. Not much for these trucks tho, mostly race car parts. I do have a power steering set up off the 68 if anyone is interested. Will be in booth on the north wall, west of the doors. I think it is the coldest spot there.

teeitup · 02-05-2003, 10:19 PM

Sorry Fred I'm not going to make it this weekend, have fun guys!! I wish I could be there. Randy

**Ironhorse** · 02-05-2003, 10:53 PM

I will be there both days from start to finish, have a booth in second building at the south end. (Being closer to the equator it should be warmer there, right?) Will have mostly 68-71/72 parts left from the '71 4x4 I just re-built. Mostly driver quality, no show stuff.

Stroker, haven't seen you at work lately. Did you change your hours?

Yukon, hope to see ya there. How is that BBC coming in the flatbed? Is barn9 and Blazerboy going to be there?

From what the weather guesser is saying, anyone going had best be wearing some good insulated coveralls or bibs. Takes a long time for those buildings to warm up after the doors are closed from the loading process.

Hope to see some board members!

travis martin · 02-05-2003, 11:30 PM

I will be there Sat. I would really like to meet some of you guys and shoot the bull. What would be a good time to meet and where? Maybe at the board that people post ads on.

70cst10_05 · 02-05-2003, 11:38 PM

im sure i will see many of you there, but won't have time to stop as i will be with my dad, uncle, and cousin, and i won't know any of you, but good luck and tell us of all your good buys.
kevin

Fred T · 02-06-2003, 01:31 AM

Ironhorse, I'll look you up. With snow thursday, a high friday of 30 it will be cold friday morning. I wish they had another building, they're having to turn away quite a few vendors. With your handle and where your from, I would guess we have another common interest.

Beyond · 02-06-2003, 10:18 AM

I'll be there on Saturday, I'll stop by your booth Ironhorse.

**Yukon Jack** · 02-06-2003, 10:36 AM

I will try to be at Ironhorses booth at around 1 pm on Friday if anyone else wants to try to meet at that time. Sound good Fred T?

Ironhorse, this week I have been replacing the seals and gaskets on the Rockwell transfer case and doing a couple other things. Hope to do the rear main seal in the next few days then hopefully do a test fit.

After that my holdup will be my rust repair. Know anyone who does welding that likes to work for free, okay, work at a reasonable rate. I have a guy from my kids' school to call but am keeping my eyes open incase he can't do the repairs.

Fred T · 02-06-2003, 06:20 PM

I'll know more this evening, but should be able to make that. Just heard it's' supposed to get down to 7 tonite, so Ironhorse better fire up his boiler if he wants to stay warm in the morning.

**Yukon Jack** · 02-06-2003, 06:34 PM

I bet I will be bringing my insulated overalls to work tomorrow!

**Ironhorse** · 02-06-2003, 11:02 PM

Hey Yukon, Fred T, and Beyond, I will be in the second building at booth W11-3 but not against the wall as I thought. I am in the center of the building towards the south end about midway North and South. When I received my stall/booth map location I did not see that the building was only half shown, other half got cut off. Have 3 tables running north and south, 2 on west side and a single on the east side of the booth. Look for two behind the cab fuel tanks, a slider and painted bumper (71-72) in the booth and there your are.

Yukon, will talk to you Friday about the welding bit. Don't really know of anyone who works free or for beer, heh, heh. Will have some pics of the truck during the re-build.

Will be looking forward to meeting some more members on the 'morrow. Took a quick walk thru this evening and there is a lot of stuff, more was coming in as I was leaving.

Make sure you have the long handles on, it will take forever for that building to warm up when they finally close the doors.

See you guys there,

Terry S · 02-06-2003, 11:13 PM

I'm going to try to make it up on Sat. I hope to see some of you guys there.

gregsplace · 02-06-2003, 11:18 PM

Well, I guess it sounds like no one likes the fresh air outside where snot and piss will be freezing!!! Thats where I'll be, lol.
I'll be south of the car barn at the east end by the gate on the north side. I've taken my flatbed and car trailer full of parts, suburban and bed trailer full, and another load in the morning around 6:30am.
Will be glad when friday is over and saturday warmer hopefully!!
Stop by and see me and more importantly buy everything I got so I wont have to make 2 trips getting it all home!! I've taken alittle bit of everything( no big stuff like rearends, trans, motors) and everything will be priced to sell!!
see you all there
Iron horse.. I have that glove box door with that custom chevrolet emblem if you still want it. Greg

**Yukon Jack** · 02-07-2003, 06:08 PM

Thanks to Ironhorse I now own a rear slider window! Thanks!

Also picked up some patch panels and an engine wiring harness. Pretty impressive crown for a Friday early afternoon. Many, many vendors.

teeitup · 02-07-2003, 06:35 PM

Was there alot of 67-72 parts? I bet it was cold, Randy

02-05-2003, 02:47 AM	#1
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Wichita Swap Meet How many of y'all will be there? This Friday & Sat. http://www.wichitaas.com/events/swapmeet.htm I'll be there Friday afternoon. E-mail me fradt@cox.net if you want to try to get together. Me and Zurbo live about 10 minutes from the coliseum. __________________ Fred There is no such thing as too much cam...just not enough engine.

02-05-2003, 10:19 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I'm probably going to try to go out around lunch on Friday - what time do you think you will be there? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-05-2003, 11:02 AM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	I should be there right from after lunch until about 5. __________________ Fred There is no such thing as too much cam...just not enough engine.

02-05-2003, 04:36 PM	#4
Zurbo Registered User Join Date: May 2001 Location: Bel Aire, Kansas, USA Posts: 186	Not sure if I can get away Friday but I am planning on Saturday. __________________ Zurbo's Chevy - 1972 Black/White Cheyenne Super. 402 Big Block /THD 400, factory air and tilt. My other Chevy - 1998 Camaro SS

02-05-2003, 05:42 PM	#5
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	I plan to be there Fri morning when the doors open. Anyone from the board planning to sell parts at the meet? __________________ 72 SWB parts and pieces Oklahoma

02-05-2003, 05:47 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Greg (gregs_place) is supposed to have a spot, I e-mailed him this morning to see if he knows where he will be. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-05-2003, 05:52 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	My dad and I will be headin down there on Friday. Don't know for sure what time we will be gettin down there..... it is like 2-3 hr drive. Looking for a good passenger rectangular chrome 1971-72 outside mirror.... not looking to spending the $35 for a new one. Maybe some new vinyl blue seat covers too. If anyone of the vendors have some. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-05-2003, 06:16 PM	#8
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 741	does anybody think that sat. will be a good day to go, because i went to the lawrence one and the second day there weren't a lot of ppl there, so i guess what im askin is do ya think there will be some good buys??? kevin __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin

02-05-2003, 06:27 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	The last time I went to this show was on a Saturday, the second day, and there appeared to be a good turnout to me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-05-2003, 06:29 PM	#10
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	I've found that both days are good. The first year I went I got there at 8am Friday, there were a lot of people not set up yet. Temp was in the teens with a north wind and snow. And the overhead doors were open. Now I don't go until after lunch. I have also gone on Saturday, it is usually busy all day, and you can usually get the price down some, too. Two guys set up there that I know, one sells chevelle parts, the other is Jeff at Bowtie bits. Jeff's against the west wall in the north end of the main building. Another guy, that I won't claim, sells mopar parts. Doesn't everyone have a friend with serious character flaws? __________________ Fred There is no such thing as too much cam...just not enough engine.

02-05-2003, 10:10 PM	#11
Kid Senior Member Join Date: Jun 2002 Location: Kansas Posts: 702	I will be there both days, selling some no longer needed parts. Not much for these trucks tho, mostly race car parts. I do have a power steering set up off the 68 if anyone is interested. Will be in booth on the north wall, west of the doors. I think it is the coldest spot there. __________________ The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348

02-05-2003, 10:19 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry Fred I'm not going to make it this weekend, have fun guys!! I wish I could be there. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2003, 10:53 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,147	I will be there both days from start to finish, have a booth in second building at the south end. (Being closer to the equator it should be warmer there, right?) Will have mostly 68-71/72 parts left from the '71 4x4 I just re-built. Mostly driver quality, no show stuff. Stroker, haven't seen you at work lately. Did you change your hours? Yukon, hope to see ya there. How is that BBC coming in the flatbed? Is barn9 and Blazerboy going to be there? From what the weather guesser is saying, anyone going had best be wearing some good insulated coveralls or bibs. Takes a long time for those buildings to warm up after the doors are closed from the loading process. Hope to see some board members! __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-05-2003, 11:30 PM	#14
travis martin CoonHunter Join Date: Aug 2002 Location: valley falls ks Posts: 346	I will be there Sat. I would really like to meet some of you guys and shoot the bull. What would be a good time to meet and where? Maybe at the board that people post ads on. __________________ 72 Chevy 1/2 ton 4x4 4" inch lift. 2000 Chevy Malibu

02-05-2003, 11:38 PM	#15
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 741	im sure i will see many of you there, but won't have time to stop as i will be with my dad, uncle, and cousin, and i won't know any of you, but good luck and tell us of all your good buys. kevin __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin



Register or Log In To remove these advertisements.

02-06-2003, 01:31 AM	#16
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Ironhorse, I'll look you up. With snow thursday, a high friday of 30 it will be cold friday morning. I wish they had another building, they're having to turn away quite a few vendors. With your handle and where your from, I would guess we have another common interest. __________________ Fred There is no such thing as too much cam...just not enough engine.

02-06-2003, 10:18 AM	#17
Beyond Registered User Join Date: Feb 2002 Location: La Harpe, KS Posts: 68	I'll be there on Saturday, I'll stop by your booth Ironhorse. __________________ 1972 C10 Daily Driver Project Truck 1971 Nova 9 second Tire Fryer 1988 Burb 1987 454 Dually Crew Cab

02-06-2003, 10:36 AM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I will try to be at Ironhorses booth at around 1 pm on Friday if anyone else wants to try to meet at that time. Sound good Fred T? Ironhorse, this week I have been replacing the seals and gaskets on the Rockwell transfer case and doing a couple other things. Hope to do the rear main seal in the next few days then hopefully do a test fit. After that my holdup will be my rust repair. Know anyone who does welding that likes to work for free, okay, work at a reasonable rate. I have a guy from my kids' school to call but am keeping my eyes open incase he can't do the repairs. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-06-2003, 06:20 PM	#19
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	I'll know more this evening, but should be able to make that. Just heard it's' supposed to get down to 7 tonite, so Ironhorse better fire up his boiler if he wants to stay warm in the morning. __________________ Fred There is no such thing as too much cam...just not enough engine.

02-06-2003, 06:34 PM	#20
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I bet I will be bringing my insulated overalls to work tomorrow! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-06-2003, 11:02 PM	#21
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,147	Hey Yukon, Fred T, and Beyond, I will be in the second building at booth W11-3 but not against the wall as I thought. I am in the center of the building towards the south end about midway North and South. When I received my stall/booth map location I did not see that the building was only half shown, other half got cut off. Have 3 tables running north and south, 2 on west side and a single on the east side of the booth. Look for two behind the cab fuel tanks, a slider and painted bumper (71-72) in the booth and there your are. Yukon, will talk to you Friday about the welding bit. Don't really know of anyone who works free or for beer, heh, heh. Will have some pics of the truck during the re-build. Will be looking forward to meeting some more members on the 'morrow. Took a quick walk thru this evening and there is a lot of stuff, more was coming in as I was leaving. Make sure you have the long handles on, it will take forever for that building to warm up when they finally close the doors. See you guys there, __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-06-2003, 11:13 PM	#22
Terry S Registered User Join Date: Nov 2002 Location: Haysville, KS Posts: 118	I'm going to try to make it up on Sat. I hope to see some of you guys there. __________________ I can do all things thru Christ, but he evidently doesn't want me to beat that Camaro light to light....

02-06-2003, 11:18 PM	#23
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	Well, I guess it sounds like no one likes the fresh air outside where snot and piss will be freezing!!! Thats where I'll be, lol. I'll be south of the car barn at the east end by the gate on the north side. I've taken my flatbed and car trailer full of parts, suburban and bed trailer full, and another load in the morning around 6:30am. Will be glad when friday is over and saturday warmer hopefully!! Stop by and see me and more importantly buy everything I got so I wont have to make 2 trips getting it all home!! I've taken alittle bit of everything( no big stuff like rearends, trans, motors) and everything will be priced to sell!! see you all there Iron horse.. I have that glove box door with that custom chevrolet emblem if you still want it. Greg __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

02-07-2003, 06:08 PM	#24
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Thanks to Ironhorse I now own a rear slider window! Thanks! Also picked up some patch panels and an engine wiring harness. Pretty impressive crown for a Friday early afternoon. Many, many vendors. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-07-2003, 06:35 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Was there alot of 67-72 parts? I bet it was cold, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.