SC Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 11-09-2011, 06:12 PM

I've gone through my parts and pulled out the stuff I don't need anymore. Shipping will be from Anderson, SC, Zip 29625. Shipping is extra unless noted. I ship atleast once a week, usually on Friday for parts paid for by Thursday. Post your zip code for a shipping quote. I will ship USPS Parcel Post (cheapest but slower) with tracking and insurance, unless you would like to pay extra for faster Priority Mail. Small parts will be sent USPS First Class with tracking. Local pick up is fine also. Payment sent within ten days would be great. Paypal and USPS money orders accepted, cash if picking up the part yourself. I know the pics are a little large but you can see the condition of the parts better this way. Thanks for looking guys!

2 (two) 5.5" diameter x 2.25" tall front/lower air bag cups from AVS, they advertise them to fit 60-87 trucks. These have been sandblasted and painted low gloss black enamel with hardener. They have bag mounting holes drilled but are not drilled for an air line port. $25.00.

2 (two) 5.5" diameter x 3.25" tall air bag cups from AVS, bare metal, rear/upper for C10's with trailing arms. They have bag mounting holes and air line holes drilled. $25.00.

Pair of hood hinges off a '65 C10. $40.00

64-66 Ashtray. Good overall condition, no rot through. Handle isn't heat warped too bad. $12.00 shipped inside USA.

Chrome horn button with rubber on back. Chrome has some pitting but looks good overall, driver condition. $25.00 shipped in USA.

Upper radiator support bracket with rubber insulators. Good condition, straight, minor surface rust only. **SOLD** Thanks Chad!

Headlight switches, these have not been tested. One early, two for 64-66. Center switch has your choice of deluxe or standard knob. I also have a mystery knob that I don't know what it fits. $15 per switch. You tell me on the mystery knob.

Glovebox door hinge bushings and bolts. Bushings are in good condition. $5.00 shipped in the USA.

Three radiator insulator bushings. $5.00 shipped inside USA.

Windshield wiper switch escuchteon. Chrome is pretty decent, slight amount of grime that could be cleaned out of the recesses. $5.00 shipped inside USA.

Glovebox latch. Good working condition, has a few slight scratches on face. Good for a driver. **SOLD** Thanks X24!!

Guage cluster from a '61 or '62 with warning lights. Untested. The pics make the lens look better than it is. $35.00 without wiring harness or $45.00 with the harness. $10.00 for the harness by itself. I did notice a couple burnt out bulbs on the harness.

Seat tracks in good condition. **SOLD** Thanks Joseph!!

Rough ashtray from a '62 or '62. No rot thru, would be fine if sandblasted. $8.00

Radiator shroud peices from a '65. Solid, no rot thru, surface rust only. $25.00

**dtkarst** · 11-09-2011, 07:28 PM

Are you willing to sell just the deluxe knob on the center headlight switch?

theastronaut · 11-09-2011, 07:35 PM

Quote:

Originally Posted by dtkarst

Are you willing to sell just the deluxe knob on the center headlight switch?

Yes sir, I'd do $8.00 shipped on that one.

**michael bustamante** · 11-09-2011, 08:20 PM

hl switch on the left is from a 68-72 cst package. the glove box latch looks to be the same 67-72.
You got some good parts here

theastronaut · 11-09-2011, 08:27 PM

Quote:

Originally Posted by michael bustamante

hl switch on the left is from a 68-72 cst package. the glove box latch looks to be the same 67-72.
You got some good parts here

I pulled the left switch from a 61/62 but they may interchange, I'm not very familiar with the 67-72 trucks. Thanks for the looking out!

**PGSigns** · 11-09-2011, 08:29 PM

I would like to get the glove box door bushings and bolts. PM me your paypal info and I will send you the funds.
Thanks
Jimmy

theastronaut · 11-09-2011, 08:41 PM

Quote:

Originally Posted by PGSigns

I would like to get the glove box door bushings and bolts. PM me your paypal info and I will send you the funds.
Thanks
Jimmy

PM sent, thanks!

**michael bustamante** · 11-10-2011, 02:17 PM

Quote:

Originally Posted by theastronaut

I pulled the left switch from a 61/62 but they may interchange, I'm not very familiar with the 67-72 trucks. Thanks for the looking out!

IM SORRY i WAS WRONG. ITS NOT FROM A 69-72. i THINK ITS YOURE RIGHT. 60-62 CUSTOM. SORRY MAN

X24 · 11-12-2011, 11:14 AM

Is the keyless glove box latch still around? If so I'll take that off your hands.
Posted via Mobile Device

theastronaut · 11-12-2011, 11:56 AM

Quote:

Originally Posted by X24

Is the keyless glove box latch still around? If so I'll take that off your hands.
Posted via Mobile Device

I still have it, PM sent.
Posted via Mobile Device

chad64chevy · 11-12-2011, 12:00 PM

i'll take the Upper radiator support bracket if its available!

theastronaut · 11-12-2011, 12:06 PM

Quote:

Originally Posted by chad64chevy

i'll take the Upper radiator support bracket if its available!

It's your's, let me know your your zip code and I'll get you a shipping quote.
Posted via Mobile Device

theastronaut · 11-12-2011, 07:12 PM

Upper radiator support bracket is sold to Chad, thanks dude! The glovebox latch and deluxe headlight knob are pending. To keep everybody up to date, I'll go back and edit the original posting as parts sell to avoid any confusion.

X24 · 11-12-2011, 09:00 PM

Payment sent for the latch. Thanks buddy
Posted via Mobile Device

theastronaut · 11-12-2011, 09:06 PM

Quote:

Originally Posted by X24

Payment sent for the latch. Thanks buddy
Posted via Mobile Device

Thanks!! I'll get it shipped out Monday!
Posted via Mobile Device

Nalley · 11-13-2011, 01:11 PM

hey would u do 25 on the seat brackets how much on shipping to 42732

theastronaut · 11-13-2011, 03:46 PM

Quote:

Originally Posted by Nalley

hey would u do 25 on the seat brackets how much on shipping to 42732

PM sent.

theastronaut · 11-15-2011, 04:12 PM

The glove box latch and seat tracks are both sold, thanks guys!!

The deluxe headlight knob and glovebox hinges are pending.

JJchamp48 · 11-16-2011, 02:52 AM

Interested in gauge harness. Do the bulbs look burnt out or is the wiring burnt?
Thanks,
Vickie

theastronaut · 11-16-2011, 10:58 AM

Quote:

Originally Posted by JJchamp48

Interested in gauge harness. Do the bulbs look burnt out or is the wiring burnt?
Thanks,
Vickie

The wiring is fine, just a few of the bulbs are burnt out. Any parts store should have the bulbs.
Posted via Mobile Device

68 SHORT-STEP'N · 11-16-2011, 08:34 PM

I'll take it. let me know paypal info.

theastronaut · 11-16-2011, 09:15 PM

Quote:

Originally Posted by 68 SHORT-STEP'N

I'll take it. let me know paypal info.

Which part are you wanting?
Posted via Mobile Device

JJchamp48 · 11-17-2011, 12:23 AM

LOL, sorry...was on my other computer when i read your post earlier, it automatically logged me in as him (68 Shortstepn
)since he uses that one. I'll take the gauge harness.
thanks,
Vickie

theastronaut · 11-17-2011, 12:44 AM

Quote:

Originally Posted by JJchamp48

LOL, sorry...was on my other computer when i read your post earlier, it automatically logged me in as him (68 Shortstepn
)since he uses that one. I'll take the gauge harness.
thanks,
Vickie

Haha! No problem

I'll PM you a shipping quote.
Posted via Mobile Device

theastronaut · 11-18-2011, 06:50 PM

11-09-2011, 06:12 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,871	Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc I've gone through my parts and pulled out the stuff I don't need anymore. Shipping will be from Anderson, SC, Zip 29625. Shipping is extra unless noted. I ship atleast once a week, usually on Friday for parts paid for by Thursday. Post your zip code for a shipping quote. I will ship USPS Parcel Post (cheapest but slower) with tracking and insurance, unless you would like to pay extra for faster Priority Mail. Small parts will be sent USPS First Class with tracking. Local pick up is fine also. Payment sent within ten days would be great. Paypal and USPS money orders accepted, cash if picking up the part yourself. I know the pics are a little large but you can see the condition of the parts better this way. Thanks for looking guys! 2 (two) 5.5" diameter x 2.25" tall front/lower air bag cups from AVS, they advertise them to fit 60-87 trucks. These have been sandblasted and painted low gloss black enamel with hardener. They have bag mounting holes drilled but are not drilled for an air line port. $25.00. 2 (two) 5.5" diameter x 3.25" tall air bag cups from AVS, bare metal, rear/upper for C10's with trailing arms. They have bag mounting holes and air line holes drilled. $25.00. Pair of hood hinges off a '65 C10. $40.00 64-66 Ashtray. Good overall condition, no rot through. Handle isn't heat warped too bad. $12.00 shipped inside USA. Chrome horn button with rubber on back. Chrome has some pitting but looks good overall, driver condition. $25.00 shipped in USA. Upper radiator support bracket with rubber insulators. Good condition, straight, minor surface rust only. SOLD Thanks Chad! Headlight switches, these have not been tested. One early, two for 64-66. Center switch has your choice of deluxe or standard knob. I also have a mystery knob that I don't know what it fits. $15 per switch. You tell me on the mystery knob. Glovebox door hinge bushings and bolts. Bushings are in good condition. $5.00 shipped in the USA. Three radiator insulator bushings. $5.00 shipped inside USA. Windshield wiper switch escuchteon. Chrome is pretty decent, slight amount of grime that could be cleaned out of the recesses. $5.00 shipped inside USA. Glovebox latch. Good working condition, has a few slight scratches on face. Good for a driver. SOLD Thanks X24!! Guage cluster from a '61 or '62 with warning lights. Untested. The pics make the lens look better than it is. $35.00 without wiring harness or $45.00 with the harness. $10.00 for the harness by itself. I did notice a couple burnt out bulbs on the harness. Seat tracks in good condition. SOLD Thanks Joseph!! Rough ashtray from a '62 or '62. No rot thru, would be fine if sandblasted. $8.00 Radiator shroud peices from a '65. Solid, no rot thru, surface rust only. $25.00 __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc Last edited by theastronaut; 11-15-2011 at 04:13 PM. Reason: Mark Items Sold

11-09-2011, 07:28 PM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc Are you willing to sell just the deluxe knob on the center headlight switch?

11-09-2011, 08:20 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,844	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc hl switch on the left is from a 68-72 cst package. the glove box latch looks to be the same 67-72. You got some good parts here __________________ 1967custom

11-09-2011, 08:29 PM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc I would like to get the glove box door bushings and bolts. PM me your paypal info and I will send you the funds. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-12-2011, 11:14 AM	#9
X24 Registered User Join Date: Sep 2011 Location: CA Posts: 129	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc Is the keyless glove box latch still around? If so I'll take that off your hands. Posted via Mobile Device __________________ X24 1964 chevy c10 step side 230ci straight six Auto power glide

11-12-2011, 12:00 PM	#11
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc i'll take the Upper radiator support bracket if its available! __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-12-2011, 07:12 PM	#13
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,871	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc Upper radiator support bracket is sold to Chad, thanks dude! The glovebox latch and deluxe headlight knob are pending. To keep everybody up to date, I'll go back and edit the original posting as parts sell to avoid any confusion. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

11-12-2011, 09:00 PM	#14
X24 Registered User Join Date: Sep 2011 Location: CA Posts: 129	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc Payment sent for the latch. Thanks buddy Posted via Mobile Device __________________ X24 1964 chevy c10 step side 230ci straight six Auto power glide

11-13-2011, 01:11 PM	#16
Nalley Registered User Join Date: Sep 2010 Location: Eastview Ky Posts: 4	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc hey would u do 25 on the seat brackets how much on shipping to 42732

11-15-2011, 04:12 PM	#18
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,871	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc The glove box latch and seat tracks are both sold, thanks guys!! The deluxe headlight knob and glovebox hinges are pending. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

11-16-2011, 02:52 AM	#19
JJchamp48 Registered User Join Date: Oct 2010 Location: Tyro, VA Posts: 209	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc Interested in gauge harness. Do the bulbs look burnt out or is the wiring burnt? Thanks, Vickie

11-16-2011, 08:34 PM	#21
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc I'll take it. let me know paypal info. __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

11-17-2011, 12:23 AM	#23
JJchamp48 Registered User Join Date: Oct 2010 Location: Tyro, VA Posts: 209	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc LOL, sorry...was on my other computer when i read your post earlier, it automatically logged me in as him (68 Shortstepn )since he uses that one. I'll take the gauge harness. thanks, Vickie

11-18-2011, 06:50 PM	#25
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,871	Re: Random Parts: Guages, Switches, Hinges, Ashtrays, Bag Cups, Etc __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.