parting 71 swb 4x4 AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 07-11-2006, 12:03 AM

This truck rolled hard, front frame is toast, maybe there's some rear frame stuff someone needs, decent interior. it was a one owner truck before this happened. Will be taking it apart on wed & thursday this week. Tom 480-241-1318

dirtball · 07-11-2006, 12:33 AM

AC truck? How much for the compressor brackets? Also interested in the crank pullies. Maybe the left side door hinges, if they look OK. Shoot me some prices.
Thanks, Brett

**special-K** · 07-11-2006, 06:21 AM

What a shame

.

**CUSTOM/10** · 07-11-2006, 02:52 PM

I might be interest in the transfer case cross member if it servived, any of the A/C stuff from under the hood, Evaperator & box, TEV, brackets, the tranfercase shifter if it's crome. Top alt bracket. ( The sloted arm )

Gary

BowTieOgre · 07-11-2006, 03:15 PM

What does it have as far as guages, column, etc?

BowTieMan · 07-11-2006, 07:09 PM

Is the crome trim that divides the two colors still good? If so name a price.

**t korinek** · 07-12-2006, 12:32 AM

Non tilt auto column, no tach dash. Bowtieman what chrome piece are you referring to? The rest of the parts I'll check on tomorrow & let you know whats good & what isn't & will try to post better pics after pulling parts. Thanks, Tom

6T8 · 07-12-2006, 10:54 AM

PM sent........thanks Rick

HeavyK20 · 07-12-2006, 10:46 PM

I'm interested in the cross member that sits between the forward spring hagers on the rear axle. Also all 4 of the rear spring hangers.

It you are taking the box off, I would like to see some pics to make sure the cross member and hangers are the same as mine.

**t korinek** · 07-13-2006, 12:16 AM

Still tearing down, Dont have pics yet, I'm roasting in the hot desert sun. I'll have pics & prices tomorrow. Heavy K what cross member do you need? Custom 10, crossmember looks good,Whats TEV?Tranfercase shifter isn't chrome. Dirtball ac brackets all there & good, crank pully good, hinges good,pics tomorrow

**CUSTOM/10** · 07-13-2006, 07:17 AM

TEV ( Thermostatic Expansion Valve ) it's the valve that controls the flow of refrigerant going into the evaperator or "cooling coil". If you can get some Pic's of the a/c box, TEV, and the crossmember once you get things disassembled.

Stay cool !
Gary

HeavyK20 · 07-13-2006, 11:09 AM

The cross member mounts directly between the forward spring hangers on the rear axle. It is located behind the cab and ahead of the rear axle. The main piece of the cross member mounts to upper part of the frame rail and there are some gussets that connect the cross member to the lower part of the frame rail.

I need the cross member and the gussets

Kantosensei · 07-13-2006, 07:42 PM

I would be interested in the wiring harness if it is uncut. Give me a price + shipping to 96349. This is a FPO AP U.S. military address. Thanks--David

**t korinek** · 07-13-2006, 08:42 PM

Heavy k heres some pics, Kantosensei what part of wiring harness? Pms sent

**t korinek** · 07-13-2006, 08:44 PM

more pics

**t korinek** · 07-13-2006, 08:48 PM

OK heres some more pics, dirtball has dibs on the ac brackets & pullys. Thanks, Tom

Kantosensei · 07-13-2006, 08:54 PM

The underdash wiring harness, fusebox, connectors, etc etc. Mine has been chopped, spliced with different color wires and engineered so much that I cant figure out what wire goes where.

**CUSTOM/10** · 07-14-2006, 07:26 AM

It's tuff to tell from the pic's what shape the parts are in. Is that dirt or rust on the transfere case crossmember, and is there any damage to the a/c evap. box tubes and coil ?? Give me your best discription and prices and will go from there.

Gary

Also it looks like dirtball is passing on the a/c brackets & pullies I might be interested.

dirtball · 07-14-2006, 08:59 AM

Hey guys, I have to pass on the AC brackets and the pullies this time. Who else needs 'em?

kndall · 07-14-2006, 11:38 AM

how much for the ac brackets? shipped to 73160

70jimmy · 07-14-2006, 12:08 PM

Does it still have the original 4x4 oil dipstick and tube? The one that curves out toward the front of the truck. If so, how much? Thanks wayne

**t korinek** · 07-14-2006, 11:36 PM

70 jimmy, no dipstick, I'm keeping the engine complete for another project. AC brackets $80 shipped,3 groove crank pullys $25 shipped, spare tire holder in great shape $20 + shipping, Transfercase crossmember $60 + shipping No heavy rust just oil & dirt on it,I have 2 other air conditioning boxs in better shape than this one $40 + shipping. The only alternator bracket I have is cracked.

kndall · 07-14-2006, 11:51 PM

Thanks but I shall pass. I am sure I can get them around here, I just have to take a stick to kill the snakes at the salvage, LOL

**CUSTOM/10** · 07-15-2006, 07:09 AM

Tom;
Pick out the best ( No damage, and most complete ) A/C box with evap. coil & TEV you have, and let me know what shipping will be to 03873.
( Maybe the one in the top left pic )
Do you have a good damper that goes in the cowl for the A/C ?
Do you have both pulleys, crank & water pump? If so throw them in the box and let me know the total.

I'm going to pass on the crossmember for now, I think shipping would be a killer on that.

Gary

badpeanut · 07-17-2006, 11:48 PM

I need a speedometer adapter box (that funny box that mounts between the transfer case and the speedometer cable).

07-11-2006, 12:03 AM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	parting 71 swb 4x4 AZ This truck rolled hard, front frame is toast, maybe there's some rear frame stuff someone needs, decent interior. it was a one owner truck before this happened. Will be taking it apart on wed & thursday this week. Tom 480-241-1318 Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-11-2006, 12:33 AM	#2
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: parting 71 swb 4x4 AZ AC truck? How much for the compressor brackets? Also interested in the crank pullies. Maybe the left side door hinges, if they look OK. Shoot me some prices. Thanks, Brett

07-11-2006, 06:21 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: parting 71 swb 4x4 AZ What a shame. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-11-2006, 02:52 PM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: parting 71 swb 4x4 AZ I might be interest in the transfer case cross member if it servived, any of the A/C stuff from under the hood, Evaperator & box, TEV, brackets, the tranfercase shifter if it's crome. Top alt bracket. ( The sloted arm ) Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 07-11-2006 at 02:54 PM.

07-11-2006, 03:15 PM	#5
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: parting 71 swb 4x4 AZ What does it have as far as guages, column, etc? __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

07-11-2006, 07:09 PM	#6
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Re: parting 71 swb 4x4 AZ Is the crome trim that divides the two colors still good? If so name a price. __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

07-12-2006, 12:32 AM	#7
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ Non tilt auto column, no tach dash. Bowtieman what chrome piece are you referring to? The rest of the parts I'll check on tomorrow & let you know whats good & what isn't & will try to post better pics after pulling parts. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-12-2006, 10:54 AM	#8
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Re: parting 71 swb 4x4 AZ PM sent........thanks Rick

07-12-2006, 10:46 PM	#9
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: parting 71 swb 4x4 AZ I'm interested in the cross member that sits between the forward spring hagers on the rear axle. Also all 4 of the rear spring hangers. It you are taking the box off, I would like to see some pics to make sure the cross member and hangers are the same as mine. __________________ Eric 1969 K20, 465/205 package

07-13-2006, 12:16 AM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ Still tearing down, Dont have pics yet, I'm roasting in the hot desert sun. I'll have pics & prices tomorrow. Heavy K what cross member do you need? Custom 10, crossmember looks good,Whats TEV?Tranfercase shifter isn't chrome. Dirtball ac brackets all there & good, crank pully good, hinges good,pics tomorrow __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-13-2006, 07:17 AM	#11
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: parting 71 swb 4x4 AZ TEV ( Thermostatic Expansion Valve ) it's the valve that controls the flow of refrigerant going into the evaperator or "cooling coil". If you can get some Pic's of the a/c box, TEV, and the crossmember once you get things disassembled. Stay cool ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

07-13-2006, 11:09 AM	#12
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: parting 71 swb 4x4 AZ The cross member mounts directly between the forward spring hangers on the rear axle. It is located behind the cab and ahead of the rear axle. The main piece of the cross member mounts to upper part of the frame rail and there are some gussets that connect the cross member to the lower part of the frame rail. I need the cross member and the gussets __________________ Eric 1969 K20, 465/205 package

07-13-2006, 07:42 PM	#13
Kantosensei Registered User Join Date: Jun 2005 Location: Japan Posts: 87	Re: parting 71 swb 4x4 AZ I would be interested in the wiring harness if it is uncut. Give me a price + shipping to 96349. This is a FPO AP U.S. military address. Thanks--David

07-13-2006, 08:42 PM	#14
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ Heavy k heres some pics, Kantosensei what part of wiring harness? Pms sent Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-13-2006, 08:44 PM	#15
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ more pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

07-13-2006, 08:48 PM	#16
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ OK heres some more pics, dirtball has dibs on the ac brackets & pullys. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-13-2006, 08:54 PM	#17
Kantosensei Registered User Join Date: Jun 2005 Location: Japan Posts: 87	Re: parting 71 swb 4x4 AZ The underdash wiring harness, fusebox, connectors, etc etc. Mine has been chopped, spliced with different color wires and engineered so much that I cant figure out what wire goes where.

07-14-2006, 07:26 AM	#18
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: parting 71 swb 4x4 AZ It's tuff to tell from the pic's what shape the parts are in. Is that dirt or rust on the transfere case crossmember, and is there any damage to the a/c evap. box tubes and coil ?? Give me your best discription and prices and will go from there. Gary Also it looks like dirtball is passing on the a/c brackets & pullies I might be interested. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 07-14-2006 at 11:12 AM.

07-14-2006, 08:59 AM	#19
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: parting 71 swb 4x4 AZ Hey guys, I have to pass on the AC brackets and the pullies this time. Who else needs 'em?

07-14-2006, 11:38 AM	#20
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Re: parting 71 swb 4x4 AZ how much for the ac brackets? shipped to 73160 __________________ I am a proud member of the "No, it's not for sale, I'm gonna fix it up someday" club. Last edited by kndall; 07-14-2006 at 11:39 AM.

07-14-2006, 12:08 PM	#21
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: parting 71 swb 4x4 AZ Does it still have the original 4x4 oil dipstick and tube? The one that curves out toward the front of the truck. If so, how much? Thanks wayne __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior

07-14-2006, 11:36 PM	#22
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: parting 71 swb 4x4 AZ 70 jimmy, no dipstick, I'm keeping the engine complete for another project. AC brackets $80 shipped,3 groove crank pullys $25 shipped, spare tire holder in great shape $20 + shipping, Transfercase crossmember $60 + shipping No heavy rust just oil & dirt on it,I have 2 other air conditioning boxs in better shape than this one $40 + shipping. The only alternator bracket I have is cracked. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-14-2006, 11:51 PM	#23
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Re: parting 71 swb 4x4 AZ Thanks but I shall pass. I am sure I can get them around here, I just have to take a stick to kill the snakes at the salvage, LOL __________________ I am a proud member of the "No, it's not for sale, I'm gonna fix it up someday" club. Last edited by kndall; 07-14-2006 at 11:51 PM.

07-15-2006, 07:09 AM	#24
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,833	Re: parting 71 swb 4x4 AZ Tom; Pick out the best ( No damage, and most complete ) A/C box with evap. coil & TEV you have, and let me know what shipping will be to 03873. ( Maybe the one in the top left pic ) Do you have a good damper that goes in the cowl for the A/C ? Do you have both pulleys, crank & water pump? If so throw them in the box and let me know the total. I'm going to pass on the crossmember for now, I think shipping would be a killer on that. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 07-15-2006 at 08:16 AM.

07-17-2006, 11:48 PM	#25
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	Re: parting 71 swb 4x4 AZ I need a speedometer adapter box (that funny box that mounts between the transfer case and the speedometer cable). __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

Register or Log In To remove these advertisements.