|
05-27-2018, 02:07 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2005
Location: Jurupa Valley, Ca
Posts: 1,210
|
Trans crossmember
OK, I know there must be a trick to this. I can't get the rear automatic trans crossmember out from between the frame rails. I got all the bolts removed, did manage to drop the th350 trans out by moving the crossmember all the way back. Would love to clean and paint it before installing the new trans.
Help
__________________
Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC |
|
|
|
05-27-2018, 06:54 PM
|
#2 |
|
Registered User
Join Date: Mar 2017
Location: Bonne Terre MO
Posts: 192
|
Re: Trans crossmember
Need more info. You should be able to tap one side forward or back enough that it comes out then pull other side out.
|
|
|
|
|
05-27-2018, 09:52 PM
|
#3 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,388
|
Re: Trans crossmember
-
I think you will have to move it forward again. It should come out though. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
05-27-2018, 10:42 PM
|
#4 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,474
|
Re: Trans crossmember
If you remove the rivets for the upper brace it becomes a lot easier. 3/8'' bolts 1'' long going back together
|
|
|
|
|
05-28-2018, 01:00 AM
|
#5 |
|
Senior Member
Join Date: Mar 2005
Location: Jurupa Valley, Ca
Posts: 1,210
|
Re: Trans crossmember
I ended up just leaving it in and cleaned 50 years of greasy gunk best I could. I considered removing the rivets for the upper brace. Just surprised the made it fit so tight
__________________
Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
