Holley 4160 750CFM Carb with electric choke. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 03-24-2007, 09:20 PM

Bought this with my Edelbrock Perfomer intake and it's been sitting on my book case for more than a year.

I had plans to run this on my 402BBC and decided to go TBI after rebuilding the motor. I also planned to powder coat it. Now it's dust coated!
150.00 plus the ride.

This is first paid, first served. I ship the following day I receive payment.

*FormerMember* · 04-01-2007, 03:04 PM

Someone's got to need some major carb that will idle and run down the road!

According to most of the drag racer's I know, this is the carb to have!

shortbed70 · 04-01-2007, 06:28 PM

How much is it to shipp to 66535

*FormerMember* · 04-01-2007, 08:01 PM

Quote:

Originally Posted by shortbed70

How much is it to shipp to 66535

Shipped 10lbs for 13.35... figure 20.00 and if it's different, I'll pay the difference.

masterbeavis · 04-02-2007, 12:04 AM

That one looks like a 4150?? Pretty much the same as a 4160 cept dual feed with center hung bowls IRC. What are the numbers on the choke horn?

Blue85 · 04-02-2007, 04:27 AM

Is it rebuilt or how used is it?

*FormerMember* · 04-02-2007, 08:16 AM

Quote:

Originally Posted by Blue85

Is it rebuilt or how used is it?

Not rebuilt, run on my motor for about 6 hours total. Needs to get the dust cleaned off of it and run hard.

Quote:

Originally Posted by masterbeavis

That one looks like a 4150?? Pretty much the same as a 4160 cept dual feed with center hung bowls IRC. What are the numbers on the choke horn?

Tony, it's a 4160, same design as a 4150 with slightly more road functionality as far as I know. It has fixed metering plates on one side of the carb and 4150 metering blocks on the other side. 0-80508

masterbeavis · 04-03-2007, 09:43 PM

I was wroooonnngg, its a 4160, 4150's have dual metering blocks.

http://holley.com/data/Products/Tech...199R9934-3.pdf

This is the Install and Tuning manual from Holley.

According to holley, this is a smog legal replacement for some big block applications 66-69

It also has #72 primary jets.

DennyB · 04-03-2007, 09:59 PM

If this is a 4160 double pumper I'll take it.

DennyB · 04-03-2007, 10:04 PM

n/m its a 4160 vacuum secondary,
.
Will you take $50 plus the ride?

*FormerMember* · 04-04-2007, 07:37 AM

Quote:

Originally Posted by DennyB

n/m its a 4160 vacuum secondary,
.
Will you take $50 plus the ride?

No, I'll burn it first for that. I bought it for 360.00 from Summit and barely used it.

masterbeavis · 04-04-2007, 11:09 PM

Heh, Fifty Dollars?? Thats funny!! Used worn 600's sell for fifty dollars. Most full service junkyards will charge twice that if it came from a running motor, and leaked gas from every gasket. Post up if you find somebody selling $50 like new 750's, I'll buy a few of them.

[edit]
John, go ahead and sell it to him for $50, plus the ride. Make sure it goes to Brazil first LOL!!

DennyB · 04-04-2007, 11:45 PM

Quote:

Originally Posted by masterbeavis

Heh, Fifty Dollars?? Thats funny!! Used worn 600's sell for fifty dollars. Most full service junkyards will charge twice that if it came from a running motor, and leaked gas from every gasket. Post up if you find somebody selling $50 like new 750's, I'll buy a few of them.

[edit]
John, go ahead and sell it to him for $50, plus the ride. Make sure it goes to Brazil first LOL!!

Hey, I made an offer. Did not know it was "like new". (didn't catch post #7)
There was no offense intended, or expected.

Denny

Rascal_one2001 · 04-05-2007, 07:40 AM

so it is ready to bolt up and run? will you take 100 shipped to 28079 I would have to wait till payday and see if I have any money left after bills to pay.

*FormerMember* · 04-05-2007, 08:13 AM

Quote:

Originally Posted by Rascal_one2001

so it is ready to bolt up and run? will you take 100 shipped to 28079 I would have to wait till payday and see if I have any money left after bills to pay.

It's ready to bolt up, probably would fire over your motor and purr with some tuning. Do you have a 750cfm carb on there now?

I'll do it for 150.00 shipped. I am having serious problems accepting anything less.

Blue85 · 04-05-2007, 01:44 PM

Would you do 150 shipped to Canada? I have paypal, Sent you PM with address

*FormerMember* · 04-05-2007, 02:01 PM

responded to PM with paypal address.

I think it's sold, pending funds.

Blue85 · 04-05-2007, 02:49 PM

Is this carb gonna work good with my 400ish horse 377 that i am planning to build? Some say it might be a bit to much.

*FormerMember* · 04-05-2007, 03:14 PM

Quote:

Originally Posted by Blue85

Is this carb gonna work good with my 400ish horse 377 that i am planning to build? Some say it might be a bit to much.

I think it would be fine. You could always rejet up or down.

Blue85 · 04-05-2007, 03:20 PM

thats what i figure too, ok sold, will send paypal this afternoon.

*FormerMember* · 04-07-2007, 03:51 PM

Shipped today, you should have recieved tracking info from USPS and Paypal.

03-24-2007, 09:20 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Holley 4160 750CFM Carb with electric choke. Bought this with my Edelbrock Perfomer intake and it's been sitting on my book case for more than a year. I had plans to run this on my 402BBC and decided to go TBI after rebuilding the motor. I also planned to powder coat it. Now it's dust coated! 150.00 plus the ride. This is first paid, first served. I ship the following day I receive payment. Last edited by FormerMember; 10-04-2007 at 06:35 PM.

04-01-2007, 03:04 PM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Holley 4160 750CFM Carb with electric choke. Someone's got to need some major carb that will idle and run down the road! According to most of the drag racer's I know, this is the carb to have!

04-01-2007, 06:28 PM	#3
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Holley 4160 750CFM Carb with electric choke. How much is it to shipp to 66535 __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-02-2007, 12:04 AM	#5
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Holley 4160 750CFM Carb with electric choke. That one looks like a 4150?? Pretty much the same as a 4160 cept dual feed with center hung bowls IRC. What are the numbers on the choke horn?

04-02-2007, 04:27 AM	#6
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Holley 4160 750CFM Carb with electric choke. Is it rebuilt or how used is it? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

04-03-2007, 09:43 PM	#8
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Holley 4160 750CFM Carb with electric choke. I was wroooonnngg, its a 4160, 4150's have dual metering blocks. http://holley.com/data/Products/Tech...199R9934-3.pdf This is the Install and Tuning manual from Holley. According to holley, this is a smog legal replacement for some big block applications 66-69 It also has #72 primary jets.

04-03-2007, 09:59 PM	#9
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: Holley 4160 750CFM Carb with electric choke. If this is a 4160 double pumper I'll take it. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

04-03-2007, 10:04 PM	#10
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: Holley 4160 750CFM Carb with electric choke. n/m its a 4160 vacuum secondary, . Will you take $50 plus the ride? __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider Last edited by DennyB; 04-03-2007 at 10:05 PM.

04-04-2007, 11:09 PM	#12
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Holley 4160 750CFM Carb with electric choke. Heh, Fifty Dollars?? Thats funny!! Used worn 600's sell for fifty dollars. Most full service junkyards will charge twice that if it came from a running motor, and leaked gas from every gasket. Post up if you find somebody selling $50 like new 750's, I'll buy a few of them. [edit] John, go ahead and sell it to him for $50, plus the ride. Make sure it goes to Brazil first LOL!! Last edited by masterbeavis; 04-04-2007 at 11:11 PM.

04-05-2007, 07:40 AM	#14
Rascal_one2001 Registered User Join Date: Dec 2006 Location: North Carolina Posts: 308	Re: Holley 4160 750CFM Carb with electric choke. so it is ready to bolt up and run? will you take 100 shipped to 28079 I would have to wait till payday and see if I have any money left after bills to pay. __________________ 1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s

04-05-2007, 01:44 PM	#16
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Holley 4160 750CFM Carb with electric choke. Would you do 150 shipped to Canada? I have paypal, Sent you PM with address __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

04-05-2007, 02:01 PM	#17
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Holley 4160 750CFM Carb with electric choke. responded to PM with paypal address. I think it's sold, pending funds.

04-05-2007, 02:49 PM	#18
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Holley 4160 750CFM Carb with electric choke. Is this carb gonna work good with my 400ish horse 377 that i am planning to build? Some say it might be a bit to much. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

04-05-2007, 03:20 PM	#20
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Holley 4160 750CFM Carb with electric choke. thats what i figure too, ok sold, will send paypal this afternoon. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

04-07-2007, 03:51 PM	#21
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Holley 4160 750CFM Carb with electric choke. Shipped today, you should have recieved tracking info from USPS and Paypal.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.