72 c30 dump with tool boxes

[daveinluray]

Hi

First post. Just bought my first Chevy and have started to work towards getting it road worthy. This first week has been interesting as nothing listed for this truck tends to add up to what the parts store says should be there.

Anyhow here is a pic. I have had trouble finding info on dump models with tool boxes so thought id post a pic and see if anybody has thoughts on dealing with this model.

thanks
dave

[harpo231]

What body manufaturer ?

[Jeff's bowtie's]

Looks like it has a 67 front clip on it

[daveinluray]

Originally Posted by harpo231

What body manufaturer ?

title says GMC

[daveinluray]

so probably not a c30 but C3500?
that might be some of the trouble I have been having. it was listed as a chevy

[harpo231]

Originally Posted by daveinluray

title says GMC

I mean the dump part

[daveinluray]

Originally Posted by Jeff's bowtie's

Looks like it has a 67 front clip on it

thanks. the raised part on the hood is bolted on and will eventually be removed.

[daveinluray]

Originally Posted by harpo231

I mean the dump part

couldnt say. nothing on title or door jam. It will be a day or two before I can lift the bed again if there is any way of telling underneath.

[Grumpy old man]

need more pics of the interior , engine ,frame , I don't remember dump beds being built with boxes like those until the 1990's . That's a 67-68 front clip and you may find that it's a late model chassis with a chevy cab and front clip ? Need more pics . I'd like to have one like it .

It may be the picture but that's one heck of a long wheel base ?

[LockDoc]

-
A picture of the SPID label on the inside of the glove box door might help, if it has one....

It's also hard to tell if it has the raised pads on the roof for the clearance lights or not from the picture.

Neat truck!

LockDoc

[daveinluray]

Originally Posted by Grumpy old man

need more pics of the interior , engine ,frame , I don't remember dump beds being built with boxes like those until the 1990's . That's a 67-68 front clip and you may find that it's a late model chassis with a chevy cab and front clip ? Need more pics . I'd like to have one like it .

ill get some more when weather gets better. engine is a remanufacturer so not original. according to mortech its a 302,327,or 350. the partial VIN behind alternator has been wiped.

the front rotors are listed as possibly from a 75. They are huge bulky things and waiting on parts to confirm. but the rear shoes were 2.5 inches wide and the smaller drum. Im just starting to learn about thee trucks and it looks like mine may very well span the years with the older clip.

end the end shes going to work around the house so hodge podge is fine.

[s10mk]

Originally Posted by daveinluray

ill get some more when weather gets better. engine is a remanufacturer so not original. according to mortech its a 302,327,or 350. the partial VIN behind alternator has been wiped.

the front rotors are listed as possibly from a 75. They are huge bulky things and waiting on parts to confirm. but the rear shoes were 2.5 inches wide and the smaller drum. Im just starting to learn about thee trucks and it looks like mine may very well span the years with the older clip.

end the end shes going to work around the house so hodge podge is fine.

Good for you! Looks like a solid truck. I saw that one on Craigslist. What is the wheelbase?

[daveinluray]

Originally Posted by LockDoc

-
A picture of the SPID label on the inside of the glove box door might help, if it has one....

It's hard to tell if it has the raised pads on the roof for the clearance lights or not from the picture.

Neat truck!

LockDoc

thanks. vin on glove box does not match riveted door VIN. it does have about four lights or so that should go across the top. They are slightly raised.

[Barnfind46]

Looks like someone stole your heater!

[daveinluray]

Originally Posted by s10mk

Good for you! Looks like a solid truck. I saw that one on Craigslist. What is the wheelbase?

thanks. I was scared i screwed up at first but its starting to shake out OK. It is around 157 measured.

[LockDoc]

Originally Posted by daveinluray

thanks. vin on glove box does not match riveted door VIN. it does have about four lights or so that should go across the top. They are slightly raised.

I'm betting the cab is '72 then. Looks like it has the large ignition bezel.

LockDoc

[daveinluray]

Originally Posted by Barnfind46

Looks like someone stole your heater!

yes indeed!

[scampr]

Looks to me like the tool boxes and dump body are not from that era at all... I am thinking 80s on up for those. Also looks like the rims are not splits which it would have had unless someone changed that all over too..??? I am wondering if its a older cab and nose put un a later model chassis.????

[CaptRMW]

That upper compartment behind the cab looks like it could be used as a mother in law apartment.

[daveinluray]

Originally Posted by scampr

Looks to me like the tool boxes and dump body are not from that era at all... I am thinking 80s on up for those. Also looks like the rims are not splits which it would have had unless someone changed that all over too..??? I am wondering if its a older cab and nose put un a later model chassis.????

thanks
two front and one rear are not, the rest(3) are split.

[Jeff's bowtie's]

Originally Posted by daveinluray

thanks
two front and one rear are not, the rest(3) are split.

If you need more solid 16" buds I have at least 3 you can have I'm about an hour and a half from you let me know

[daveinluray]

this has all been very useful. thanks to all. Judging by my rotors the Chassis seems to probably be in the range of 74-86. In time ill narrow it down I hope.

[CaptRMW]

Do a search on Google images of dump truck with tool boxes and you will find some info.

[LockDoc]

Originally Posted by daveinluray

this has all been very useful. thanks to all. Judging by my rotors the Chassis seems to probably be in the range of 74-86. In time ill narrow it down I hope.

Just the front cross member could have been swapped also.

LockDoc

[bigrigpardo]

a pic of the cab mounts on the frame will tell us if its a 67-72 or later chasis.