1970 C-10 sbc headers. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rob463e · 07-27-2014, 11:54 PM

can anyone give me some suggestions on what headers to go with on my 70 swb C-10 with a sbc & 700R. And any ideas of a good muffler. Thanks.

**Captainfab** · 07-28-2014, 12:52 AM

What is your ride height? Can you get away with long tube headers? Regarding mufflers, how loud to you want your exhaust? What size tubing are you going to use?

rob463e · 07-28-2014, 01:03 AM

The front is 2 1/2 to 3 inches lowered. Not sure about long tube clearing. I would like a good sounding muffler with some sound but not so loud to be obnoxious. I plan on going with the 3" pipe. Thanks.

crazy longhorn · 07-28-2014, 07:02 AM

On your sb(even pretty hot), 2 1/2 " is plenty on pipe sizing? I would suggest A hooker comp(full length header), 1 5/8 primary/2 1/2 collector. The Hookers tuck up nice, & run 2 1/2 right off the collector. Add an H pipe to the system, run to the rear (mufflers of your choice), & you will have a nice system

I would suggest a magna flow muff...if you like it loud, go 14" body, for a bit more mellow, go 18" body on the muff? Longhorn

rob463e · 07-28-2014, 11:54 AM

Thanks for the info. This will help me a lot.

07-27-2014, 11:54 PM	#1
rob463e Registered User Join Date: Feb 2014 Location: destrehan, la Posts: 3	1970 C-10 sbc headers. can anyone give me some suggestions on what headers to go with on my 70 swb C-10 with a sbc & 700R. And any ideas of a good muffler. Thanks.

07-28-2014, 12:52 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: 1970 C-10 sbc headers. What is your ride height? Can you get away with long tube headers? Regarding mufflers, how loud to you want your exhaust? What size tubing are you going to use? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-28-2014, 01:03 AM	#3
rob463e Registered User Join Date: Feb 2014 Location: destrehan, la Posts: 3	Re: 1970 C-10 sbc headers. The front is 2 1/2 to 3 inches lowered. Not sure about long tube clearing. I would like a good sounding muffler with some sound but not so loud to be obnoxious. I plan on going with the 3" pipe. Thanks.

07-28-2014, 07:02 AM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: 1970 C-10 sbc headers. On your sb(even pretty hot), 2 1/2 " is plenty on pipe sizing? I would suggest A hooker comp(full length header), 1 5/8 primary/2 1/2 collector. The Hookers tuck up nice, & run 2 1/2 right off the collector. Add an H pipe to the system, run to the rear (mufflers of your choice), & you will have a nice system I would suggest a magna flow muff...if you like it loud, go 14" body, for a bit more mellow, go 18" body on the muff? Longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

07-28-2014, 11:54 AM	#5
rob463e Registered User Join Date: Feb 2014 Location: destrehan, la Posts: 3	Re: 1970 C-10 sbc headers. Thanks for the info. This will help me a lot.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.