If grasshoppers had machine guns the birds wouldn’t mess with them. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ruger1 · 11-06-2019, 12:14 AM

In January I purchased this beauty from a gentleman in Oklahoma. It didn’t stay together for long. I immediately started ripping this thing down to the bone. I had a vision for this truck since the day my dad let me drive his 69 when I was 15 years old. I felt I should keep a record of the process and what better way than here with peers that have a passion for the same thing! Here’s the progress so far. Please feel free to voice your opinions and or constructive criticism. I’m all ears!
Posted via Mobile Device

**Steeveedee** · 11-06-2019, 01:10 AM

Interesting. If grasshoppers had red and yellow stripes, the birds wouldn't mess with 'em, either, 'cause they'd be poison, like Amazon tree frogs. Cool truck!

Ruger1 · 11-06-2019, 01:24 AM

First was tear down!

Ruger1 · 11-06-2019, 01:36 AM

.... and more tear down.

Ruger1 · 11-06-2019, 01:48 AM

Next came the fun stuff. I wanted a short bed so I decided to cut the frame down. I cut 12" from the center and 8" from the rear. With a little welding help from a buddy, I think we got this thing pretty solid!

Ruger1 · 11-06-2019, 01:49 AM

Sorry for the sideways pictures. I will learn this interwebs thing one day.

Ruger1 · 11-06-2019, 02:59 AM

After dipping my toes in the chassis cutting pool. I decided to learn how to swim. Yup, I decided to step notch the rear. I get a little ballsy when it comes to what I think I am capable of. But hey, a wise man once said, "If your gonna get into some ****. You might as well get it all over you."

Ruger1 · 11-06-2019, 03:19 AM

A few more shots of the step notches and boxed the frame a little bit. Shortly after coming to a stopping point the rear axle showed up. Went with a narrowed 9", eaton true trac 35 spline, 389 gear. Plan on putting a built 4L80E in front of it.

Ruger1 · 11-06-2019, 03:28 AM

While working on the chassis I ran into a little treasure. A 400 sbc setting in storage container of my friends father. 100 bucks later she was in the bed of the truck on the way to the machine shop. Local guy named Kim Barr can build a mean one!

Ruger1 · 11-06-2019, 03:37 AM

I know alot of yall are probably saying "LS THE WORLD!" but the sbc has that sentimental value from my teenage years while driving my fathers 69. With that being said, the ol' sbc wasnt about to be no driving miss daisy engine. With the expertise of Kim and a little pocket change she's larging and chargin like Katlyn Jenner before the nut cuttin

Here are a few pics of what she looks like now.

Ruger1 · 11-06-2019, 03:48 AM

Took a break on the rear end and moved up front when the Porterbuilt dropmember came in. Cant say enough good things about the Porterbuilt guys. Took care of me and didnt mind droppin some knowledge on a newbie such as myself. Oh did I mention, this is my first frame off/custom build? This forum has helped tremendously!!!! I am still learning things daily from here. THANKS TO ALL THE AWESOME PEOPLE ON HERE!!! Anyway back to the front end. This was not a task I wanted to try to tackle so I was more than happy to dig deep for some quality craftsmanship from Porterbuilt. Here's a couple pics.

**72 tigger** · 11-06-2019, 06:57 AM

Nice project! That will be a mean truck when you’re done

**bigmac73** · 11-06-2019, 09:18 AM

hey looks good. Do you have the engine specs?

**dmjlambert** · 11-06-2019, 09:34 AM

Good progress. That looks nice. That is an interesting rear bumper on the truck.

phlegm · 11-06-2019, 09:48 AM

Looks like fun, the right tools and space make all the difference in the world.... and Ill play.

If frogs had wings they wouldn't bump there arses when they hopped...

Ruger1 · 11-06-2019, 10:22 AM

Quote:

Originally Posted by 72 tigger

Nice project! That will be a mean truck when you’re done

Thank you sir.

cornerstone · 11-06-2019, 11:26 AM

Welcome aboard neighbor. For a custom truck I believe you are doing it right! Thems some right purdy welds there. How about a side shot to show us your wheels? Keep the pics a comin' man!
Brian

Ruger1 · 11-06-2019, 02:07 PM

Haha. I like the poisonous spin you did there. Thanks.

Ruger1 · 11-06-2019, 02:23 PM

Quote:

Originally Posted by bigmac73

hey looks good. Do you have the engine specs?

Engine is stroked 3.75 and bored .040 to make it a 422. 598tq / 595hp

Attached a picture of the break in on the dyno.

Ruger1 · 11-06-2019, 02:38 PM

Quote:

Originally Posted by phlegm

Looks like fun, the right tools and space make all the difference in the world.... and Ill play.

If frogs had wings they wouldn't bump there arses when they hopped...

Haha! Learned a new one with the frog quote, thanks! As far as tools and space, I’ve found there’s never enough. Lol. Doing everything out of my “2 car” garage. Let’s just say I’m a Tetris master by now. Lol

Ruger1 · 11-06-2019, 02:41 PM

Quote:

Originally Posted by cornerstone

Welcome aboard neighbor. For a custom truck I believe you are doing it right! Thems some right purdy welds there. How about a side shot to show us your wheels? Keep the pics a comin' man!
Brian

Thank your, sir! I appreciate the welcome. I plan on posting more pics of the process until I catch up to where I am now. Gonna try to get those up tonight.

Ruger1 · 11-06-2019, 02:45 PM

Quote:

Originally Posted by dmjlambert

Good progress. That looks nice. That is an interesting rear bumper on the truck.

Thank you, sir! Man, that bumper was SOLID too! Still have it hanging around. Kinda like it. Lol

BB72CHEVKT · 11-06-2019, 03:05 PM

I had Kim Barr build me a big block for my 72 and ended up selling it 10 years later and just now getting back to doing something with the 72.

Happy_dan · 11-06-2019, 03:14 PM

Quote:

Originally Posted by Ruger1

Thank your, sir! I appreciate the welcome. I plan on posting more pics of the process until I catch up to where I am now. Gonna try to get those up tonight.

Looking forward to the pictures. Great thread.

Ruger1 · 11-06-2019, 07:44 PM

Quote:

Originally Posted by BB72CHEVKT

I had Kim Barr build me a big block for my 72 and ended up selling it 10 years later and just now getting back to doing something with the 72.

Kim really knows his stuff. Glad your finally getting back around to it. Good luck!

11-06-2019, 12:14 AM	#1
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	If grasshoppers had machine guns the birds wouldn’t mess with them. In January I purchased this beauty from a gentleman in Oklahoma. It didn’t stay together for long. I immediately started ripping this thing down to the bone. I had a vision for this truck since the day my dad let me drive his 69 when I was 15 years old. I felt I should keep a record of the process and what better way than here with peers that have a passion for the same thing! Here’s the progress so far. Please feel free to voice your opinions and or constructive criticism. I’m all ears! Posted via Mobile Device Attached Images

11-06-2019, 01:10 AM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,611	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Interesting. If grasshoppers had red and yellow stripes, the birds wouldn't mess with 'em, either, 'cause they'd be poison, like Amazon tree frogs. Cool truck! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-06-2019, 01:24 AM	#3
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. First was tear down! Attached Images

11-06-2019, 01:36 AM	#4
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. .... and more tear down. Attached Images

11-06-2019, 01:48 AM	#5
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Next came the fun stuff. I wanted a short bed so I decided to cut the frame down. I cut 12" from the center and 8" from the rear. With a little welding help from a buddy, I think we got this thing pretty solid! Attached Images

11-06-2019, 01:49 AM	#6
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Sorry for the sideways pictures. I will learn this interwebs thing one day.

11-06-2019, 02:59 AM	#7
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. After dipping my toes in the chassis cutting pool. I decided to learn how to swim. Yup, I decided to step notch the rear. I get a little ballsy when it comes to what I think I am capable of. But hey, a wise man once said, "If your gonna get into some ****. You might as well get it all over you." Attached Images

11-06-2019, 03:19 AM	#8
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. A few more shots of the step notches and boxed the frame a little bit. Shortly after coming to a stopping point the rear axle showed up. Went with a narrowed 9", eaton true trac 35 spline, 389 gear. Plan on putting a built 4L80E in front of it. Attached Images

11-06-2019, 03:28 AM	#9
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. While working on the chassis I ran into a little treasure. A 400 sbc setting in storage container of my friends father. 100 bucks later she was in the bed of the truck on the way to the machine shop. Local guy named Kim Barr can build a mean one! Attached Images

11-06-2019, 03:37 AM	#10
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. I know alot of yall are probably saying "LS THE WORLD!" but the sbc has that sentimental value from my teenage years while driving my fathers 69. With that being said, the ol' sbc wasnt about to be no driving miss daisy engine. With the expertise of Kim and a little pocket change she's larging and chargin like Katlyn Jenner before the nut cuttin Here are a few pics of what she looks like now. Attached Images

11-06-2019, 03:48 AM	#11
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Took a break on the rear end and moved up front when the Porterbuilt dropmember came in. Cant say enough good things about the Porterbuilt guys. Took care of me and didnt mind droppin some knowledge on a newbie such as myself. Oh did I mention, this is my first frame off/custom build? This forum has helped tremendously!!!! I am still learning things daily from here. THANKS TO ALL THE AWESOME PEOPLE ON HERE!!! Anyway back to the front end. This was not a task I wanted to try to tackle so I was more than happy to dig deep for some quality craftsmanship from Porterbuilt. Here's a couple pics. Attached Images

11-06-2019, 06:57 AM	#12
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Nice project! That will be a mean truck when you’re done __________________ 71 C10 72 K20 72 K10 Super Kirk

11-06-2019, 09:18 AM	#13
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. hey looks good. Do you have the engine specs? __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

11-06-2019, 09:34 AM	#14
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,814	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Good progress. That looks nice. That is an interesting rear bumper on the truck.

11-06-2019, 09:48 AM	#15
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Looks like fun, the right tools and space make all the difference in the world.... and Ill play. If frogs had wings they wouldn't bump there arses when they hopped... __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was



Register or Log In To remove these advertisements.

11-06-2019, 11:26 AM	#17
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Welcome aboard neighbor. For a custom truck I believe you are doing it right! Thems some right purdy welds there. How about a side shot to show us your wheels? Keep the pics a comin' man! Brian __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. Last edited by cornerstone; 11-06-2019 at 11:38 AM.

11-06-2019, 02:07 PM	#18
Ruger1 Registered User Join Date: Jan 2019 Location: Texas Posts: 25	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. Haha. I like the poisonous spin you did there. Thanks.

11-06-2019, 03:05 PM	#23
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: If grasshoppers had machine guns the birds wouldn’t mess with them. I had Kim Barr build me a big block for my 72 and ended up selling it 10 years later and just now getting back to doing something with the 72. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

Register or Log In To remove these advertisements.