Need help Id'ing a part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gdiwicker · 07-05-2013, 08:04 PM

Hey All,
Well after rebuilding the PSCV, it turns out the rebuilt valve is still faulty. I took it off today since a new one is being delivered today and I found that I smashed the mounting threads with the pinch bolt. The pinch bolt was much harder to install and the valve was much harder to get off. I'll post some pics shortly as they are still on my camera.

So the threaded rod that mounts the PSCV and the assist ram further down is the centerlink, yes? If not what is that part? I have two options I guess; 1. take off the part and have a shop chase the threads a bit with a large die, or find a replacement.

Does anyone know where to find a replacement?

1967 c10

07-05-2013, 08:04 PM	#1
gdiwicker Registered User Join Date: May 2013 Location: Longmont, Co Posts: 48	Need help Id'ing a part Hey All, Well after rebuilding the PSCV, it turns out the rebuilt valve is still faulty. I took it off today since a new one is being delivered today and I found that I smashed the mounting threads with the pinch bolt. The pinch bolt was much harder to install and the valve was much harder to get off. I'll post some pics shortly as they are still on my camera. So the threaded rod that mounts the PSCV and the assist ram further down is the centerlink, yes? If not what is that part? I have two options I guess; 1. take off the part and have a shop chase the threads a bit with a large die, or find a replacement. Does anyone know where to find a replacement? 1967 c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.