LA 72 swb parts truck

[Darren MagooGardner]

I will be bringing home my 72 swb parts truck Monday. It has a few parts I will sell. I will be making wall art out of the bed, front end and complet dash. I will get better pics as I remove them. It is 522 med bronze. Big parts can be picked up local. parts are plus shipping. If you see anything you like, just ask.
1 black dr visor 10.00
Bed spare tire carrier ( bottom rusted out) 10.00
Ram horn manifolds 30.00 SOLD
Brake boost brackets 20.00 sold
2nd set 20.00
Bench seat tracks for parts 25.00
Black center seatbelts and female dr and pass (bad shape) 10.00
3 speed trans for parts not sure if it is any good 20.00
Clutch and brake pedal assm. 30.00 SOLD
Black wheel w cracks and blue horn button 20.00
Gas pedal assembly 15.00SOLD,,SOLD
2nd pedal assembly 15.00
Radio and speaker bracket 15.00 SOLD PENDING PAYMENT
Small block engine stands 30.00 SOLD
New item..Factory licence plate holder with light very rare 30.00
3 way aux fuel tank valve 30.00 sold
Vent window screws and bezels 10.00 shippedsold
2ND SET 10.00 SHIPPED
A pair of 522 Bronze doors 60.00
5 LUG 3.73 coil rearend 125.00 UPICUP
Hood hinges pair..60.00 shipped (blasted) SOLD
Hood latch..(powder coated black) 30.00
Center grill support (powder coated black) 30.00
Door parts 10.00 each.
POWDER COATING NOW AVAILABLE.

more parts later

[WIDESIDE72]

How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces.

I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor.

Does the truck havethe original stainless wiper holders?

How about the rear axle brake lines?

I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware.

Shipping would be to Leander Tx 78641.
Posted via Mobile Device

[WIDESIDE72]

Since you mention "parts truck", I assume no title(?)
Posted via Mobile Device

[WIDESIDE72]

From the photos, the bed looks solid. I don't mean to be pushy, but so you might consider selling it for a rougher one to make wall art out of. Decent SWB fleet beds bring a pretty penny. You might could make enough to buy a few more! Just my opinion and if I'm out of line I apologize.
Posted via Mobile Device

[budnikguy]

interested in the in bed spare tire carrier, pics please when you have the opportunity..

[rwade]

What is the condition of the cab? Any pictures? Price?

Thanks, Wade
Posted via Mobile Device

[Jsleeman]

How much for the Master Cylinder and calipers?

[Darren MagooGardner]

Originally Posted by WIDESIDE72

From the photos, the bed looks solid. I don't mean to be pushy, but so you might consider selling it for a rougher one to make wall art out of. Decent SWB fleet beds bring a pretty penny. You might could make enough to buy a few more! Just my opinion and if I'm out of line I apologize.
Posted via Mobile Device

Not pushy at all. I allways like to hear different views on what I am about to do.The bed floor is rotted out. wheel wells are good and it has a few minor dents around tail lights. What is a SWB bed worth? As for a tittle,I think it does. I will hafta ask the guy.
I will check on the E brake parts when I get it home.
Dont ever hesitate to give your opinion....you never know what it is worth.
thanks

[mvesr]

Does it have power steering, and if so do you still have the mounting brackets?

Thanks-Mika

[Darren MagooGardner]

Originally Posted by rwade

What is the condition of the cab? Any pictures? Price?

Thanks, Wade
Posted via Mobile Device

The cab is in typical bad shape. Rusted out in the normal places. I will post more pics as I get them.
thanks

[Darren MagooGardner]

Originally Posted by mvesr

Does it have power steering, and if so do you still have the mounting brackets?

Thanks-Mika

Manual steering.
thanks

[rwade]

I may have the P/S brackets. I'd have to look on Monday when I get back in the shop.
Posted via Mobile Device

[soundqdoug]

the BED!! I have been looking for months!

[1old67]

How about the rear wire harness doesn't have to be perfect thx
Posted via Mobile Device

[budnikguy]

also, is there a drive shaft?

[brian1971]

Any sport mirror brackets and screws thanks
Posted via Mobile Device

[Darren MagooGardner]

Originally Posted by 1old67

How about the rear wire harness doesn't have to be perfect thx
Posted via Mobile Device

It has a rear wire harness. I am bringing the truck home tommorrow and I will see what shape it is in. If it is does 30.00 shipped sound good?
thanks

[Darren MagooGardner]

Originally Posted by brian1971

Any sport mirror brackets and screws thanks
Posted via Mobile Device

No mirrors at all. sorry

[Darren MagooGardner]

Originally Posted by budnikguy

also, is there a drive shaft?

There is a drive shaft..but it is a standard trans. I am getting the tranny too. not sure of its worth.
thanks

[Darren MagooGardner]

Originally Posted by soundqdoug

the BED!! I have been looking for months!

It CAN be yours. it needs a new floor. I was going to cut it up for wall art. I think now I will swap it for a long bed (any condition) plus 150.00
The pic is what I want to build.

[Darren MagooGardner]

Originally Posted by Jsleeman

How much for the Master Cylinder and calipers?

The master cylinder does not have a cap and is full of water. Does have calipers. I am sure they need to be rebuilt. how does 30 plus shipping sound?

[Juarez823]

How much for the center link?
Posted via Mobile Device

[brian1971]

Thanks for response,Brian
Posted via Mobile Device

[1old67]

Sounds good. Thx pix would be great whenever you get it out
Posted via Mobile Device

[Darren MagooGardner]

Originally Posted by Juarez823

How much for the center link?
Posted via Mobile Device

Let me see if it has one and the condition of it.
thanks