Project ''Tailor Made'' LOWESTSIXTY7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lowestsixty7 · 12-06-2008, 05:50 PM

So i have been kinda hanging around here for awhile....figured i would start a little build thread about my truck. Its a 67' from the state of Washington so 9it had a lot of rust. Not a big deal. So this is what we have done to it...
Chopped 3 1/4''
Sectioned Body 1 1/2'' (3/4'' above and 3/4'' below lower body line)
Shortened Short bed 3'' total (Some in front and some in back)
Complete Frame
Bodydropped to the Door
Shortened front fenders 3/4''
Shortened the total wheel base 2''
Custom Front End Sheetmetal
Fuel Injected LT1
All Stainless Steel Headers
Holeset Turbo (Front Mount)
Custom sheetmetal center counsel
and a bunch of more stuff....

I work at IF Customs and the truck has been being built there with the help of friends. Should be done by SEMA next year

Pics coming tonight....

lowestsixty7 · 12-06-2008, 09:32 PM

Hey guys...here you are there are a bunch of pics if i did it right. Let me know what you think

lowestsixty7 · 12-06-2008, 09:37 PM

lowestsixty7 · 12-06-2008, 09:54 PM

lowestsixty7 · 12-06-2008, 10:00 PM

lowestsixty7 · 12-06-2008, 10:03 PM

67-72crazy · 12-06-2008, 09:59 PM

good luck with your project.

lowestsixty7 · 12-06-2008, 10:18 PM

Quote:

Originally Posted by 67-72crazy

good luck with your project.

Thanks

68chevy68 · 12-06-2008, 10:32 PM

I knew I reconized your truck. You have done a lot since the last time I checked out the IF website. That dash reminds me of Chris's truck. I hooked up with you guys in Conway Arkansas and followed you all to Greenville. I wish they would wise up and hook it up again.

Your truck is looking really good. I love all the metal fabrication. Your interior is going to be really trick. Keep the pictures coming.

ripdog28 · 12-06-2008, 10:42 PM

67ChevyRedneck · 12-07-2008, 12:58 AM

Quote:

Originally Posted by ripdog28

Holy crap!!!

Awesome!

lowestsixty7 · 12-06-2008, 11:14 PM

Quote:

Originally Posted by 68chevy68

I knew I reconized your truck. You have done a lot since the last time I checked out the IF website. That dash reminds me of Chris's truck. I hooked up with you guys in Conway Arkansas and followed you all to Greenville. I wish they would wise up and hook it up again.

Your truck is looking really good. I love all the metal fabrication. Your interior is going to be really trick. Keep the pictures coming.

Hey whats up...i remember you. This is Chris! How has it been?

PBFAB.COM · 12-07-2008, 12:44 AM

Lots of cool mods and details on this truck... nice work!

au03z71 · 12-06-2008, 10:27 PM

That's some awesome fab work you've done there. Nice job!

98L150 · 12-06-2008, 10:51 PM

i'm liking this one

68 short step · 12-06-2008, 11:01 PM

FRENCHBLUE72 · 12-06-2008, 11:03 PM

Very nice I thought that was the eye truck at first. Is this truck gonna be lower than the green prostreet chevy you guys built. Awesome work !!!!!!!!!!!

lowestsixty7 · 12-06-2008, 11:13 PM

Quote:

Originally Posted by FRENCHBLUE72

Very nice I thought that was the eye truck at first. Is this truck gonna be lower than the green prostreet chevy you guys built. Awesome work !!!!!!!!!!!

Thanks.....Its actually close to the height of the prostreet but we sectioned that 2'' and chopped it 3.5''. I am going to try to make a build thread for the eye truck soon...we are doing alot of work to it right now.

badwrench3 · 12-07-2008, 01:36 AM

Thanks for taking the time to share that with us.

Rokcrln · 12-07-2008, 02:25 AM

WoW very cool mods. I like the tubo set up with the split rad!

Kevin
LFD Inc.

lowestsixty7 · 12-07-2008, 01:12 PM

Quote:

Originally Posted by Rokcrln

WoW very cool mods. I like the tubo set up with the split rad!

Kevin
LFD Inc.

Yeah...its kinda different. What we did cause there was not alot of room is this.....the intercooler is mounted in the center and then there are to alumninum radiators on each side of the intercooler. On the front of the radiators are two electric fans. Then on the back of the radiators there are
2 oil coolers one on each side and then two ac condensors one on each side. Its basically one big unit.

Spray-Bomb · 12-07-2008, 02:14 AM

WoW !!!

Thats freak'n cool

Long Roof · 12-07-2008, 12:01 PM

MAD Skilz dude.

8mpg · 12-07-2008, 12:45 PM

wow....you guys have some metal working skills!!

Take2 · 12-07-2008, 12:53 PM

Badass Build !!!!

12-06-2008, 05:50 PM	#1
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Project ''Tailor Made'' LOWESTSIXTY7 So i have been kinda hanging around here for awhile....figured i would start a little build thread about my truck. Its a 67' from the state of Washington so 9it had a lot of rust. Not a big deal. So this is what we have done to it... Chopped 3 1/4'' Sectioned Body 1 1/2'' (3/4'' above and 3/4'' below lower body line) Shortened Short bed 3'' total (Some in front and some in back) Complete Frame Bodydropped to the Door Shortened front fenders 3/4'' Shortened the total wheel base 2'' Custom Front End Sheetmetal Fuel Injected LT1 All Stainless Steel Headers Holeset Turbo (Front Mount) Custom sheetmetal center counsel and a bunch of more stuff.... I work at IF Customs and the truck has been being built there with the help of friends. Should be done by SEMA next year Pics coming tonight....

12-06-2008, 09:32 PM	#2
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Re: Project ''Tailor Made'' LOWESTSIXTY7 Hey guys...here you are there are a bunch of pics if i did it right. Let me know what you think Last edited by lowestsixty7; 12-06-2008 at 09:35 PM.

12-06-2008, 09:37 PM	#3
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Re: Project ''Tailor Made'' LOWESTSIXTY7 Last edited by lowestsixty7; 12-06-2008 at 09:50 PM.

12-06-2008, 09:54 PM	#4
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Re: Project ''Tailor Made'' LOWESTSIXTY7

12-06-2008, 10:00 PM	#5
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Re: Project ''Tailor Made'' LOWESTSIXTY7

12-06-2008, 10:03 PM	#6
lowestsixty7 Registered User Join Date: Nov 2008 Location: So. Cal Posts: 61	Re: Project ''Tailor Made'' LOWESTSIXTY7

12-06-2008, 09:59 PM	#7
67-72crazy Registered User Join Date: Jan 2008 Location: greenfield indiana Posts: 241	Re: Project ''Tailor Made'' LOWESTSIXTY7 good luck with your project. __________________ 1991 1500 longbed: my daily driver 1937 chevy 2dr sedan. dads project

12-06-2008, 10:32 PM	#9
68chevy68 Registered User Join Date: Apr 2007 Location: arkansas Posts: 524	Re: Project ''Tailor Made'' LOWESTSIXTY7 I knew I reconized your truck. You have done a lot since the last time I checked out the IF website. That dash reminds me of Chris's truck. I hooked up with you guys in Conway Arkansas and followed you all to Greenville. I wish they would wise up and hook it up again. Your truck is looking really good. I love all the metal fabrication. Your interior is going to be really trick. Keep the pictures coming. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=245203 Last edited by 68chevy68; 12-06-2008 at 10:40 PM.

12-06-2008, 10:42 PM	#10
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Project ''Tailor Made'' LOWESTSIXTY7 __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

12-07-2008, 12:44 AM	#13
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Project ''Tailor Made'' LOWESTSIXTY7 Lots of cool mods and details on this truck... nice work! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

12-06-2008, 10:27 PM	#14
au03z71 Registered User Join Date: Jul 2006 Location: alabama Posts: 647	Re: Project ''Tailor Made'' LOWESTSIXTY7 That's some awesome fab work you've done there. Nice job!

12-06-2008, 10:51 PM	#15
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Project ''Tailor Made'' LOWESTSIXTY7 i'm liking this one __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-06-2008, 11:01 PM	#16
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Project ''Tailor Made'' LOWESTSIXTY7

12-06-2008, 11:03 PM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project ''Tailor Made'' LOWESTSIXTY7 Very nice I thought that was the eye truck at first. Is this truck gonna be lower than the green prostreet chevy you guys built. Awesome work !!!!!!!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-07-2008, 01:36 AM	#19
badwrench3 Registered User Join Date: Apr 2008 Location: white house tennessee Posts: 12	Re: Project ''Tailor Made'' LOWESTSIXTY7 Thanks for taking the time to share that with us.



Register or Log In To remove these advertisements.

12-07-2008, 02:25 AM	#20
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project ''Tailor Made'' LOWESTSIXTY7 WoW very cool mods. I like the tubo set up with the split rad! Kevin LFD Inc.

12-07-2008, 02:14 AM	#22
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project ''Tailor Made'' LOWESTSIXTY7 WoW !!! Thats freak'n cool __________________ Just not low enough... ----------------------------- Sinister Killer

12-07-2008, 12:01 PM	#23
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Project ''Tailor Made'' LOWESTSIXTY7 MAD Skilz dude. __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

12-07-2008, 12:45 PM	#24
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	Re: Project ''Tailor Made'' LOWESTSIXTY7 wow....you guys have some metal working skills!!

12-07-2008, 12:53 PM	#25
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Re: Project ''Tailor Made'' LOWESTSIXTY7 Badass Build !!!!

Register or Log In To remove these advertisements.