body mount component order question

[dyrt]

Howdy folks,

When i pulled my cab from the frame the mounts were so rotten that i could not even figure out how many components were involved, let alone the order they fell out of the frame since they broke in so many pieces. I purchased a new gmc pauls kit and the pieces are all quality, but i am not sure why i only have 2 washers that fit on the front bolts and i was hoping to get the cab back on the frame this weekend but he is not answering email until he reopens on monday......

Can anyone tell me if there is supposed to be a washer between the upper half of the body mount and the cab floor? It has always been my understanding that the halves of the mount went around the frame mount, the tube went through them, it was sandwiched by 2 washers, and one washer went against the body while the other washer was against the bolt head or the nut depending on how the bolt went through. I only have 2 washers that fit the larger front bolts, which had me thinking that perhaps the front mount didn't need a washer between the body and mount, but that would mean the tube has to crush and wear against sheet metal. Any ideas?
i looked at the lmc picture but it doesn't really spec where the washer sits.

Mike