Value of a '72 3/4 ton rolling frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lukecp · 08-09-2003, 08:52 PM

I found a parts truck for sale today....with a very rust free (for this area anyway) cab on it, even in the same color as my truck....for the right price too

.

Anyway, it is a '72 Chevy 3/4 ton pickup...with 8 lug wheels, front disc brakes, and i would imagine a Dana 60 or HO72 rear axle with 3.54 gears (truck originally had a 402 big block). How much would the rolling frame be worth, minus engine and transmission? Aren't 3/4 ton front disc trucks kinda hard to find?

Also, the truck had air conditioning, but the heater box, brakets, and compresser under the hood are all missing. Could i put my non-AC heater core and box on the firewall, and run that until i can piece togheter a factory-like AC system in the future? Thanks for any help

teeitup · 08-09-2003, 09:37 PM

The 3/4 frame and spindles aren't worth anything around here. I've had five 71-72 3/4 trucks in the last 2 months, most of them went to scrap yard because no one wanting them. I did sell 2 front ends for $20, not worth the time to cut them apart. Take out the crossmember, drive shaft, motor mounts, rearend and take the body off and scrap the rest unless you are going to fix it up. Good luck Randy

*Phillip Johnson* · 08-09-2003, 11:52 PM

Hmmmmmm How bad do you need one.. I have a 71 and a 70 complete frame. The 71 has disc up front and the 70 has drums. I see you are across the country. Maybe ot would fit on top of my 72 4x4 that is comming your way.. I have the 71 in Chico Calif and the 70 is out here still on my trailer looking for a place to hide from my wife.

*Phillip Johnson* · 08-10-2003, 02:32 AM

I just got a reply regarding my above post and when I replied to his question, he had spam blocker and it wouldnt take my email.. Go figure..

08-09-2003, 08:52 PM	#1
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Value of a '72 3/4 ton rolling frame? I found a parts truck for sale today....with a very rust free (for this area anyway) cab on it, even in the same color as my truck....for the right price too . Anyway, it is a '72 Chevy 3/4 ton pickup...with 8 lug wheels, front disc brakes, and i would imagine a Dana 60 or HO72 rear axle with 3.54 gears (truck originally had a 402 big block). How much would the rolling frame be worth, minus engine and transmission? Aren't 3/4 ton front disc trucks kinda hard to find? Also, the truck had air conditioning, but the heater box, brakets, and compresser under the hood are all missing. Could i put my non-AC heater core and box on the firewall, and run that until i can piece togheter a factory-like AC system in the future? Thanks for any help __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

08-09-2003, 09:37 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	The 3/4 frame and spindles aren't worth anything around here. I've had five 71-72 3/4 trucks in the last 2 months, most of them went to scrap yard because no one wanting them. I did sell 2 front ends for $20, not worth the time to cut them apart. Take out the crossmember, drive shaft, motor mounts, rearend and take the body off and scrap the rest unless you are going to fix it up. Good luck Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-09-2003, 11:52 PM	#3
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,580	Hmmmmmm How bad do you need one.. I have a 71 and a 70 complete frame. The 71 has disc up front and the 70 has drums. I see you are across the country. Maybe ot would fit on top of my 72 4x4 that is comming your way.. I have the 71 in Chico Calif and the 70 is out here still on my trailer looking for a place to hide from my wife.

08-10-2003, 02:32 AM	#4
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,580	I just got a reply regarding my above post and when I replied to his question, he had spam blocker and it wouldnt take my email.. Go figure..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.