Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-12-2019, 11:05 AM | #1 |
Registered User
Join Date: Feb 2018
Location: Fountain Hills, AZ
Posts: 161
|
Wheel Vintiques / JEGS Rant
I had heard some horror stories about Wheel Vintiques before, but elected to order 4 wheels from JEGS back in August 2018 for my 1967 C10.
JEGS shipped 3 of the wheels in short order, and claimed a back-order on the remaining wheel to be delivered in September. I purchased new tires in anticipation of the 4th wheel delivery. Then JEGS advised me the order would arrive in November....then December.....on and on until the most recent stating it would now be May 2019. Needless to say, I won't be ordering anything from JEGS or Wheel Vintiques again. The remaining wheel is a 15" x 7" - 6 on 5-1/2" bolt pattern "bare 62 series smoothie". If anyone knows there whereabouts of one of these wheels, I would be greatly obliged. What follows is the most recent correspondence between JEGS and I. JEGS and I have been exchanging emails since October of 2018. _______________________________________________________ Lisa Trago (JEGS Performance) Feb 11, 9:40 PM EST Mike, We have contacted Wheel Vintiques but they only provide estimated ship dates. We are unable to pin them down on an exact date. They have stated they expect the part to ship in approximately four weeks and we have no way to get them to ship something they do not have available. I apologize for the inconvenience. Lisa Trago JEGS Customer Service We are dedicated to providing our customers with the very best in selection, value, same day shipping and lifetime support. Thank you for choosing JEGS! Feb 11, 7:26 PM EST Thank you, Melanie. Can you get some kind of commitment from the supplier? I would think an organization as big as JEGS has a little muscle to address this problem. I bought these wheels in August, 2018. Jegs delivered 3 of the 4 ordered. I have been waiting on the 4th wheel since August. 6 months is tool long and now you are saying middle of March which is getting close to 8 months. Can you kick this complaint up a notch or two? Thank you and kind regards |
02-12-2019, 11:30 AM | #2 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
Sorry about your luck with Wheel Vintiques. Good luck finding a better business to buy their products than Jeg's. Jeg's doesn't make the wheels. They have no control over this. Seems they have been good about letting you know what they know. I'd bet that size is not a big seller. Most go with their 8" steelies to gain a noticeable difference over stock 6". Since you already have three wheels you're stuck needing to buy one more from somebody... once Wheel Vintiques comes through. If I were you I wouldn't burn that bridge. You have given no reason for me to find fault in Jeg's. You realize the 6-lugs are a recent addition to Wheel Vintiques' offerings, right. I think they sold you the last they had and Wheel Vintiques is jerking everyone around by putting off the next run.
Just supposing here, but in the special parts world it isn't the same as replacement parts for late-models. Back in '77 I waited 6 months for my bought and paid for 37/14.50 Armstrongs from Dick Cepek. They were advertised pre-production and I got one of their first sets once they existed. I guarantee you I was the first guy on the East Coast to have 37" rubber since these were the first off road tires to come out over 36". I have waited long periods for many hot new parts for my Harleys over the years. But when I got them I was the first kid on the block
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-13-2019 at 07:40 PM. |
02-12-2019, 11:38 AM | #3 |
Senior Member
Join Date: May 2015
Location: Sierra Vista, Arizona
Posts: 398
|
Re: Wheel Vintiques / JEGS Rant
I know you went through Jegs for the purchase, but I'd almost just give Wheel Vintiques a call to see if they could do something about it. I think 8 months is just ridiculous waiting on one wheel.
__________________
1968 C10 SWB 400SBC with VN327 20's 1972 K5 Blazer 383SBC 2011 Cadillac CTSV |
02-12-2019, 12:07 PM | #4 |
Registered User
Join Date: Oct 2016
Location: Dallas Texas
Posts: 3,154
|
Re: Wheel Vintiques / JEGS Rant
I agree with the above, give the manufacturer a chance to fix this. Let them know Jegs is making your experience a bad one.
2 years ago I had the same thing happen, same company, different product. They were very happy to take my funds but couldn't help me at all with getting the product to my project ( set of 400 dollar headers ) once. Haven't ordered anything from them since! -klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold |
02-12-2019, 12:34 PM | #5 |
Registered User
Join Date: May 2018
Location: Reno, NV
Posts: 232
|
Re: Wheel Vintiques / JEGS Rant
Similar frustration with Jegs - I'm looking for one American Racing AR969 for my suburban so I can have a matching spare. Jegs has them listed on ebay with '10 available'. 3 days after I place my order it is cancelled and they say the wheels are discontinued.
How can you advertise '10 available' for an item you don't stock and can't even get? Lame. |
02-12-2019, 07:29 PM | #6 |
Registered User
Join Date: Feb 2018
Location: Fountain Hills, AZ
Posts: 161
|
Re: Wheel Vintiques / JEGS Rant
Got another note from JEGS today.... now they are saying May 2019.
Sure..... I know that JEGS is just a retailer for Wheel Vintiques. My concern is that they listed them as available before this episode started. I believe that a company the size of JEGS should have some ability to advise WV is a strong fashion that they are not satisfied with their supplier. Maybe that's just dreamin'. The purpose of this post was simply to let others know about "in stock" claims by retailers and to search for an additional wheel. No bridges will be burned. |
02-12-2019, 08:15 PM | #7 |
Registered User
Join Date: Feb 2018
Location: Gorham, ME
Posts: 96
|
Re: Wheel Vintiques / JEGS Rant
Have you personally tried to contact Wheel Vintiques to find out whats going on?
__________________
68 K20 Custom Camper/CST Wrecker. 97 GMC K1500 short bed reg cab. |
02-12-2019, 10:03 PM | #8 |
Senior Member
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,554
|
Re: Wheel Vintiques / JEGS Rant
I had the same problem with Jegs... ended up ordering the same exact wheels from summit and shipped within a week.
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY |
02-13-2019, 08:41 AM | #9 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
Well, maybe Jeg's is the bad guy here. I don't know. I've always been happy, and maybe just lucky. I sure was when it was time to get my 16 x 8 8-luggers. They most certainly were on backorder when I bought them and I knew that full well in advance. I felt they did a very smart business move but putting the $125 wheels on sale for $90. They became available when they said they would and I got a $500 set for $360 with no agony.
I feel your pain and frustration. Been there/done that on many things. Those tires I spoke of took so long I had to tell them when they came in to not send them to MD because I was moving to CO... and gave that address. Then, me and the gal I was going out to be with broke up so I took my buddy up on coming down to FL for the winter, then head to CO in the Spring. Changed shipping address again. It was Spring by the time they became available, so I had them ship to MD because I was heading back up before heading west and I needed good tires for the trip. Head spinning yet? I had just turned 22 when I ordered then and I was only a couple months from my 23rd birthday when I finally got them.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
02-13-2019, 02:21 PM | #10 |
Post Whore
Join Date: Feb 2016
Location: Portland Oregon
Posts: 11,278
|
Re: Wheel Vintiques / JEGS Rant
My experience with the aftermarket wheel industry says that the supplier is most likely the culprit. It is common practice in the industry to come out with a new wheel style and not start manufacturing them unless a certain amount of prepaid orders are received. The same applies to existing runs of wheels. If a certain size doesn't sell well enough they wont do another production run. This doesn't mean that they will stop advertising them as available just in case some vehicle hits the show/magazine circuit and the demand suddenly explodes and people are prepaying for the wheels.
My advice is to see if you can return them and get them in another size or locate the missing one somewhere else. The only other option would be to step up and pay their minimum amount for a production run and sell them yourself. Which unless your Jay Leno probably isn't an option. Jegs is good about returns so unless they refuse to refund the money I wouldn't blame them Good luck.
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
02-13-2019, 03:40 PM | #11 |
Registered User
Join Date: Jul 2008
Location: Eastern Oregon
Posts: 2,383
|
Re: Wheel Vintiques / JEGS Rant
I would have passed when told I was only getting three wheels ? Send them back for a refund, lots of other wheels out there.
__________________
71 C-20 07 Magnum RT AWD |
02-13-2019, 03:42 PM | #12 |
Registered User
Join Date: Nov 2013
Location: Winnipeg, Mb
Posts: 1,115
|
Re: Wheel Vintiques / JEGS Rant
first-send them back and buy something else from someone else.
second-You bought them from Jegs so it is their problem, they took your money. They should of notified you upfront if all four wheels you paid for couldn't arrive at the same time and let you decide if you wanted them or not. Shame on them. |
02-13-2019, 06:32 PM | #13 |
6>8 Plugless........
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
|
Re: Wheel Vintiques / JEGS Rant
I almost placed an order through Jeggs for some wheels last week. Same thing. Their site said they had 10 of each size available. I called to verify and nope, they had 0 available but 10 on order. There were still in a container floating across the ocean. I didn't order from them. In their defense, I've had this happen before and it always has been the supplier being low on stock. Not so much the distributor. It still is a pain in the butt and sucks though.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
02-13-2019, 07:37 PM | #14 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
^^^ There's a good point within this post for all ordering. If you do an order totally online this type of thing is not uncommon... the gap between what shows on the website and reality. Usually if you call to order or just to verify you'll get the reality.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
02-14-2019, 12:15 AM | #15 |
Registered User
Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: Wheel Vintiques / JEGS Rant
If a company cannot get all 4 at the same time there is a issue, whether is wheels or other parts.
Why would I stock 3 of a part when you need 4 for a complete set? I personally like manufacturing batch numbers and dates to be sequential. That means they are as close as possible to be entirely identical. i.e. all made by the same person, exact same steel. its how i roll |
02-14-2019, 06:46 AM | #16 |
Senior Member
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: Wheel Vintiques / JEGS Rant
I've got Wheels Vintiques chrome smoothies on both my trucks. My daily driver has 16x8 all around and the hot rod has 15x6's front and 15x10's rear, I wanted 5" wheels but Wheels Vintiques indicated it would be weeks possibly months before they made 5" runs of those wheels. A 15x7" wheel is not as common as they were years ago which lends to the production wait time. Six years ago 16" General 275/70's were readily available, last summer I couldn't find a set anywhere, so I went with 265/70's realizing the 16" wheels and tires were going to way side. I think I would send the three back opting for four 7" wheels from another manufacturer. US Wheel has the 15x7's on ebay for a good price https://www.ebay.com/itm/US-Wheel-52...-/142152999374 I see that Summit has Wheels Vintiques 62 Series in 15x7...Maybe give them a call? Kinda have to play all the angles and make some calls. I had to make a truck show in week realizing the "Chevelle" headers that came with the BB I had just dropped in wasn't going to work. I called Summit, Jegs, Hedman, nobody could get them to me in time. I ran the Hedman part number on Amazon and low and behold they had them for $30 less than Summit & Jegs and since I have Amazon Prime they were delivered in 24 hours! I learned a valuable lesson @ $159 delivered... Good luck
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" |
02-14-2019, 08:06 AM | #17 |
Registered User
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
|
Re: Wheel Vintiques / JEGS Rant
I have bought two sets of Wheel Vintiques series 62 wheels in the last year Summit. I had to wait on both but not the number of months you have. It didn't matter on the 15 X 8's for the Blazer as it was still in body/paint. However, I wanted the wheels for the Corvette as they had to be painted and I had brand new tires I wanted to get on it before driving weather expired. A few times the delivery date got moved forward and after 3 weeks, I was not happy. Summit continued to blame it on Wheel Vintiques. I called Wheel Vintiques and asked them how many of the wheels I needed they had in stock - they said 40! I asked when they were going to ship them to Summit and I was told that they can't (per Summit) ship until there is either a full pallet or two (can't recall if 1 or 2 pallets had to be ordered before they could ship). So I was being lied to by Summit. I called them and demanded that they drop ship them to me immediately from Wheel Vintiques which they did. Still took 4 or 5 days from the west coast, but I might still be waiting if I hadn't called. I suggest you call Wheel Vintiques yourself. Maybe you are in the same boat with Jegs?
__________________
1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7 |
02-14-2019, 08:20 AM | #18 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
Yeah, I looked into dealing Tri-Plus parts a while back and you'd be amazed at the price break given commercial accounts on palleted freight. As much as you can fit as high as can be (sensibly) stacked was a flat rate of $69. Jeg's and Summit offer free freight, right? This is what makes that possible.
Jeg's wouldn't be stocking only three wheels. I'm sure they purchase in multiples of four. Most sales are 2 or 4, with an occasional single replacement or an order including spare. I'm certain the 3 received were the last of a full pallet order.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
02-14-2019, 12:07 PM | #19 |
Registered User
Join Date: Feb 2018
Location: Fountain Hills, AZ
Posts: 161
|
Re: Wheel Vintiques / JEGS Rant
Here's the original order confirmation.
I will contact WV and see what they have to say. Ready to Ship Items Qty Item 1 939-62-570604 *15X7 O.E. 6X5.5 BARE 4.0 This item is expected to ship 08/10/2018. 1 939-62-570604 *15X7 O.E. 6X5.5 BARE 4.0 This item is expected to ship 08/10/2018. BackOrdered Items Qty. Item 2 939-62-5806044 15X8 O.E. 6X5.5 BARE 4.25 This item is expected to ship 09/04/2018. If you have any questions about this order, please reply to JEGS Customer Care or contact us at : Jegs High Performance 101 Jegs Place Delaware, OH 43015 USA Telephone: 1-800-345-4545 Note the backorder items were the 15 x 8 and they were shipped as described. Here's the '67 back from paint. Still putting the trim back on and can drive it on existing wheels. Will paint all 4 wheels when the last one shows up. |
02-14-2019, 01:52 PM | #20 |
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,238
|
Re: Wheel Vintiques / JEGS Rant
Paint the stock wheels (white) and call it good!
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. Last edited by palallin; 02-15-2019 at 02:30 PM. |
02-14-2019, 02:01 PM | #21 |
Registered User
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
|
Re: Wheel Vintiques / JEGS Rant
The series 62 wheels are steelies.
__________________
1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7 |
02-15-2019, 08:45 AM | #22 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
I think I know how you feel. Much like a belt buckle you can't undo and a stuck zipper on a hot date! You want it done done just as you want it the first time out, after all your efforts. And someone making money off of you is holding you back.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
02-16-2019, 08:12 PM | #23 |
Registered User
Join Date: Jul 2013
Location: LI, NY 11801
Posts: 1,140
|
Re: Wheel Vintiques / JEGS Rant
Thanks for the information, I was looking for a set of Wheel Vintiques for my beast.
Maybe Not!
__________________
1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks! |
02-17-2019, 08:19 AM | #24 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Wheel Vintiques / JEGS Rant
Have you spoken with Wheel Vintiques, yet? Any news?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
02-17-2019, 06:11 PM | #25 |
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,204
|
Re: Wheel Vintiques / JEGS Rant
https://www.wheelvintiques.com
800.959.2100 why not just call them direct... Just checked both back space wheel stock for your wheels directly on Wheel Vintiques site...(link above)... They show both in stock with prices of $87 for 4.25" backspace and $64 for 4" backspace units... plus shipping.... I have ordered direct from WV on numerous occasions...have never had an issue....maybe just been lucky.... JEGS is usually ok with deliveries...but again, they are at the mercy of their suppliers.
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox |
Bookmarks |
|
|